Wind Tunnel Strain-Gage Balance Calibration Data Analysis Using a Weighted Least Squares Approach

A new approach is presented that uses a weighted least squares fit to analyze wind tunnel strain-gage balance calibration data. The weighted least squares fit is specifically designed to increase the influence of single-component loadings during the regression analysis. The weighted least squares fit also reduces the impact of calibration load schedule asymmetries on the predicted primary sensitivities of the balance gages. A weighting factor between zero and one is assigned to each calibration data point that depends on a simple count of its intentionally loaded load components or gages. The greater the number of a data point's intentionally loaded load components or gages is, the smaller its weighting factor becomes. The proposed approach is applicable to both the Iterative and Non-Iterative Methods that are used for the analysis of strain-gage balance calibration data in the aerospace testing community. The Iterative Method uses a reasonable estimate of the tare corrected load set as input for the determination of the weighting factors. The Non-Iterative Method, on the other hand, uses gage output differences relative to the natural zeros as input for the determination of the weighting factors. Machine calibration data of a six-component force balance is used to illustrate benefits of the proposed weighted least squares fit. In addition, a detailed derivation of the PRESS residuals associated with a weighted least squares fit is given in the appendices of the paper as this information could not be found in the literature. These PRESS residuals may be needed to evaluate the predictive capabilities of the final regression models that result from a weighted least squares fit of the balance calibration data

Detection of Unexpected High Correlations between Balance Calibration Loads and Load Residuals

An algorithm was developed for the assessment of strain-gage balance calibration data that makes it possible to systematically investigate potential sources of unexpected high correlations between calibration load residuals and applied calibration loads. The algorithm investigates correlations on a load series by load series basis. The linear correlation coefficient is used to quantify the correlations. It is computed for all possible pairs of calibration load residuals and applied calibration loads that can be constructed for the given balance calibration data set. An unexpected high correlation between a load residual and a load is detected if three conditions are met: (i) the absolute value of the correlation coefficient of a residual/load pair exceeds 0.95; (ii) the maximum of the absolute values of the residuals of a load series exceeds 0.25 % of the load capacity; (iii) the load component of the load series is intentionally applied. Data from a baseline calibration of a six-component force balance is used to illustrate the application of the detection algorithm to a real-world data set. This analysis also showed that the detection algorithm can identify load alignment errors as long as repeat load series are contained in the balance calibration data set that do not suffer from load alignment problems

Regression Analysis and Calibration Recommendations for the Characterization of Balance Temperature Effects

Analysis and use of temperature-dependent wind tunnel strain-gage balance calibration data are discussed in the paper. First, three different methods are presented and compared that may be used to process temperature-dependent strain-gage balance data. The first method uses an extended set of independent variables in order to process the data and predict balance loads. The second method applies an extended load iteration equation during the analysis of balance calibration data. The third method uses temperature-dependent sensitivities for the data analysis. Physical interpretations of the most important temperature-dependent regression model terms are provided that relate temperature compensation imperfections and the temperature-dependent nature of the gage factor to sets of regression model terms. Finally, balance calibration recommendations are listed so that temperature-dependent calibration data can be obtained and successfully processed using the reviewed analysis methods

A New Load Residual Threshold Definition for the Evaluation of Wind Tunnel Strain-Gage Balance Data

A new definition of a threshold for the detection of load residual outliers of wind tunnel strain-gage balance data was developed. The new threshold is defined as the product between the inverse of the absolute value of the primary gage sensitivity and an empirical limit of the electrical outputs of a strain{gage. The empirical limit of the outputs is either 2.5 microV/V for balance calibration or check load residuals. A reduced limit of 0.5 microV/V is recommended for the evaluation of differences between repeat load points because, by design, the calculation of these differences removes errors in the residuals that are associated with the regression analysis of the data itself. The definition of the new threshold and different methods for the determination of the primary gage sensitivity are discussed. In addition, calibration data of a six-component force balance and a five-component semi-span balance are used to illustrate the application of the proposed new threshold definition to different types of strain{gage balances. During the discussion of the force balance example it is also explained how the estimated maximum expected output of a balance gage can be used to better understand results of the application of the new threshold definition

Independent policy learning: Contextual diffusion of active labour market policies

This chapter analyses in which ways diffusion based on interdependent policy learning explains the spread of active labour market policies (ALMP) in the OECD countries. By applying error correction models using multiplicative spatial Prais-Winsten regressions for analyzing the diffusion of ALMPs in 22 OECD countries from 1991–2013, we find evidence of governments adapting labour market policy strategies that have proven successful, that is, perform well in increasing labour market participation in other countries. However, interdependent learning is conditional on the institutional framework: policymakers rather learn from the experience of other countries in the same welfare regime. Even more importantly, the results bear witness to the importance of the European Employment Strategy (EES) as an international coordination framework facilitating policy learning

Headache and migraine during pregnancy and puerperium: the MIGRA-study

There is little prospectively gathered data on the course of headaches during pregnancy and postpartum, and the influence of breastfeeding is unclear. This is a large, prospective study, which invited all pregnant women in the catchment area during a defined period. All participants (n = 2,126) filled in questionnaires concerning headache. Among these, a total of 208 women with migraine according to the International Headache Society criteria also filled in detailed headache diaries during pregnancy and the puerperal period. Freedom from earlier headaches during pregnancy was significantly more common than new onset of headache during pregnancy (p < 0.001). This was not influenced by prior use of oral contraceptives. According to the diaries, there was a gradual decrease during pregnancy in the frequency of all headaches and of self-considered migraine. There was also a significant decrease in the duration of headaches (p < 0.001) during pregnancy compared to before. Earlier parity did not influence the course. Apart from a significant increase during the first week postpartum (p < 0.01), the overall occurrence of headaches during puerperium did not differ from the pregnancy period. Compared to pregnancy, there was a postpartum increase in the mean intensity (p < 0.01) and duration (p = 0.050) of headaches, as well as in the mean number of analgesics used (p < 0.001). Breastfeeding did not influence the occurrence of headaches postpartum. These data are of practical value for informing pregnant migraineurs about the typical clinical prospects and for giving advice on breastfeeding

In Vivo Methods for the Assessment of Topical Drug Bioavailability

This paper reviews some current methods for the in vivo assessment of local cutaneous bioavailability in humans after topical drug application. After an introduction discussing the importance of local drug bioavailability assessment and the limitations of model-based predictions, the focus turns to the relevance of experimental studies. The available techniques are then reviewed in detail, with particular emphasis on the tape stripping and microdialysis methodologies. Other less developed techniques, including the skin biopsy, suction blister, follicle removal and confocal Raman spectroscopy techniques are also described

Depression in Cancer: the many biobehavioural pathways driving tumor progression

Major Depressive Disorder (MDD) is common among cancer patients, with prevalence rates up to four-times higher than the general population. Depression confers worse outcomes, including non-adherence to treatment and increased mortality in the oncology setting. Advances in the understanding of neurobiological underpinnings of depression have revealed shared biobehavioral mechanisms may contribute to cancer progression. Moreover, psychosocial stressors in cancer promote: (1) inflammation and oxidative/nitrosative stress; (2) a decreased immunosurveillance; and (3) a dysfunctional activation of the autonomic nervous system and of the hypothalamic-pituitary-adrenal axis. Consequently, the prompt recognition of depression among patients with cancer who may benefit of treatment strategies targeting depressive symptoms, cognitive dysfunction, fatigue and sleep disturbances, is a public health priority. Moreover, behavioral strategies aiming at reducing psychological distress and depressive symptoms, including addressing unhealthy diet and life-style choices, as well as physical inactivity and sleep dysfunction, may represent important strategies not only to treat depression, but also to improve wider cancer-related outcomes. Herein, we provide a comprehensive review of the intertwined biobehavioural pathways linking depression to cancer progression. In addition, the clinical implications of these findings are critically reviewed