1,014 research outputs found
Development of a unique laboratory standard indium gallium arsenide detector for the 500 to 1700 micron spectral region, phase 2
In the course of this work, 5 mm diameter InGaAs pin detectors were produced which met or exceeded all of the goals of the program. The best results achieved were: shunt resistance of over 300 K ohms; rise time of less than 300 ns; contact resistance of less than 20 ohms; quantum efficiency of over 50 percent in the 0.5 to 1.7 micron range; and devices were maintained and operated at 125 C without deterioration for over 100 hours. In order to achieve the goals of this program, several major technological advances were realized, among them: successful design, construction and operation of a hydride VPE reactor capable of growing epitaxial layers on 2 inch diameter InP substrates with a capacity of over 8 wafers per day; wafer processing was upgraded to handle 2 inch wafers; a double layer Si3N4/SiO2 antireflection coating which enhances response over the 0.5 to 1.7 micron range was developed; a method for anisotropic, precisely controlled CH4/H2 plasma etching for enhancement of response at short wavelengths was developed; and electronic and optical testing methods were developed to allow full characterization of detectors with size and spectral response characteristics. On the basis of the work and results achieved in this program, it is concluded that large size, high shunt resistance, high quantum efficiency InGaAs pin detectors are not only feasible but also manufacturable on industrial scale. This device spans a significant portion of visible and near infrared spectral range and it will allow a single detector to be used for the 0.5 to 1.7 micron spectral region, rather than the presently used silicon (for 0.5 to 1.1 microns) and germanium (0.8 to 1.7 microns)
Zamke za nositelje naboja u stupnjevanim InGaAS fotodiodama s velikim sadržajem indija
Carrier traps in In0.82Ga0.18As, introduced during manufacturing of photodiodes by vapour phase epitaxy (VPE), have been studied by electrical measurements. Two groups of localized energy levels associated with traps were found in photodiodes annealed at higher temperature after fabrication: the first, at Ec- 0.14 eV, and the second located deeper, close to the middle of the energy gap. Electrically activated dislocations by association with some impurities are responsible for the occurrence of the deeper levels.Električnim mjerenjima istražena su svojstva zamki za nositelje naboja koje nastaju pri izradi fotodioda iz In0.82Ga0.18As metodom epitaksijalnog rasta iz parne faze (VPE). U fotodiodama, koje su naknadno napuštane nakon izrade na povišenoj temperaturi, zapažene su dvije skupine lokaliziranih nivoa zamki: jedan plići na Ec − 0, 14 eV i druge dublje nešto ispod sredine zabranjenog energijskog pojasa. Ustanovljeno je da su električki aktivirane dislokacije primjesama odgovorne za pojavu dubljih nivoa
Zamke za nositelje naboja u stupnjevanim InGaAS fotodiodama s velikim sadržajem indija
Carrier traps in In0.82Ga0.18As, introduced during manufacturing of photodiodes by vapour phase epitaxy (VPE), have been studied by electrical measurements. Two groups of localized energy levels associated with traps were found in photodiodes annealed at higher temperature after fabrication: the first, at Ec- 0.14 eV, and the second located deeper, close to the middle of the energy gap. Electrically activated dislocations by association with some impurities are responsible for the occurrence of the deeper levels.Električnim mjerenjima istražena su svojstva zamki za nositelje naboja koje nastaju pri izradi fotodioda iz In0.82Ga0.18As metodom epitaksijalnog rasta iz parne faze (VPE). U fotodiodama, koje su naknadno napuštane nakon izrade na povišenoj temperaturi, zapažene su dvije skupine lokaliziranih nivoa zamki: jedan plići na Ec − 0, 14 eV i druge dublje nešto ispod sredine zabranjenog energijskog pojasa. Ustanovljeno je da su električki aktivirane dislokacije primjesama odgovorne za pojavu dubljih nivoa
Single-Molecule Analysis Reveals the Kinetics and Physiological Relevance of MutL-ssDNA Binding
DNA binding by MutL homologs (MLH/PMS) during mismatch repair (MMR) has been considered based on biochemical and genetic studies. Bulk studies with MutL and its yeast homologs Mlh1-Pms1 have suggested an integral role for a single-stranded DNA (ssDNA) binding activity during MMR. We have developed single-molecule Förster resonance energy transfer (smFRET) and a single-molecule DNA flow-extension assays to examine MutL interaction with ssDNA in real time. The smFRET assay allowed us to observe MutL-ssDNA association and dissociation. We determined that MutL-ssDNA binding required ATP and was the greatest at ionic strength below 25 mM (KD = 29 nM) while it dramatically decreases above 100 mM (KD>2 µM). Single-molecule DNA flow-extension analysis suggests that multiple MutL proteins may bind ssDNA at low ionic strength but this activity does not enhance stability at elevated ionic strengths. These studies are consistent with the conclusion that a stable MutL-ssDNA interaction is unlikely to occur at physiological salt eliminating a number of MMR models. However, the activity may infer some related dynamic DNA transaction process during MMR
Evidence of and search for double-charmonium production in and decays
Using data samples of and
events collected with the Belle detector, a first experimental
search has been made for double-charmonium production in the exclusive decays
, where , , , , and . No significant signal is
observed in the spectra of the mass recoiling against the reconstructed
or except for the evidence of production with a
significance of for . The
measured branching fraction \BR(\Upsilon(1S)\rightarrow J/\psi+\chi_{c1}) is
. The
confidence level upper limits on the branching fractions of the other modes
having a significance of less than are determined. These results are
consistent with theoretical calculations using the nonrelativistic QCD
factorization approach.Comment: 12 pages, 4 figures, 1 table. The fit range was extended to include
X(4160) signal according to referee's suggestions. Other results unchanged.
Paper was accepted for publication as a regular article in Physical Review
Expression in Antennae and Reproductive Organs Suggests a Dual Role of an Odorant-Binding Protein in Two Sibling Helicoverpa Species
Odorant-binding proteins (OBPs) mediate both perception and release of semiochemicals in insects. These proteins are the ideal targets for understanding the olfactory code of insects as well as for interfering with their communication system in order to control pest species. The two sibling Lepidopteran species Helicoverpa armigera and H. assulta are two major agricultural pests. As part of our aim to characterize the OBP repertoire of these two species, here we focus our attention on a member of this family, OBP10, particularly interesting for its expression pattern. The protein is specifically expressed in the antennae of both sexes, being absent from other sensory organs. However, it is highly abundant in seminal fluid, is transferred to females during mating and is eventually found on the surface of fertilised eggs. Among the several different volatile compounds present in reproductive organs, OBP10 binds 1-dodecene, a compound reported as an insect repellent. These results have been verified in both H. armigera and H. assulta with no apparent differences between the two species. The recombinant OBP10 binds, besides 1-dodecene, some linear alcohols and several aromatic compounds. The structural similarity of OBP10 with OBP1 of the mosquito Culex quinquefasciatus, a protein reported to bind an oviposition pheromone, and its affinity with 1-dodecene suggest that OBP10 could be a carrier for oviposition deterrents, favouring spreading of the eggs in these species where cannibalism is active among larvae
RosettaRemodel: A Generalized Framework for Flexible Backbone Protein Design
We describe RosettaRemodel, a generalized framework for flexible protein design that provides a versatile and convenient interface to the Rosetta modeling suite. RosettaRemodel employs a unified interface, called a blueprint, which allows detailed control over many aspects of flexible backbone protein design calculations. RosettaRemodel allows the construction and elaboration of customized protocols for a wide range of design problems ranging from loop insertion and deletion, disulfide engineering, domain assembly, loop remodeling, motif grafting, symmetrical units, to de novo structure modeling
The neutron and its role in cosmology and particle physics
Experiments with cold and ultracold neutrons have reached a level of
precision such that problems far beyond the scale of the present Standard Model
of particle physics become accessible to experimental investigation. Due to the
close links between particle physics and cosmology, these studies also permit a
deep look into the very first instances of our universe. First addressed in
this article, both in theory and experiment, is the problem of baryogenesis ...
The question how baryogenesis could have happened is open to experimental
tests, and it turns out that this problem can be curbed by the very stringent
limits on an electric dipole moment of the neutron, a quantity that also has
deep implications for particle physics. Then we discuss the recent spectacular
observation of neutron quantization in the earth's gravitational field and of
resonance transitions between such gravitational energy states. These
measurements, together with new evaluations of neutron scattering data, set new
constraints on deviations from Newton's gravitational law at the picometer
scale. Such deviations are predicted in modern theories with extra-dimensions
that propose unification of the Planck scale with the scale of the Standard
Model ... Another main topic is the weak-interaction parameters in various
fields of physics and astrophysics that must all be derived from measured
neutron decay data. Up to now, about 10 different neutron decay observables
have been measured, much more than needed in the electroweak Standard Model.
This allows various precise tests for new physics beyond the Standard Model,
competing with or surpassing similar tests at high-energy. The review ends with
a discussion of neutron and nuclear data required in the synthesis of the
elements during the "first three minutes" and later on in stellar
nucleosynthesis.Comment: 91 pages, 30 figures, accepted by Reviews of Modern Physic
Alignment of the CMS tracker with LHC and cosmic ray data
© CERN 2014 for the benefit of the CMS collaboration, published under the terms of the Creative Commons Attribution 3.0 License by IOP Publishing Ltd and Sissa Medialab srl. Any further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation and DOI.The central component of the CMS detector is the largest silicon tracker ever built. The precise alignment of this complex device is a formidable challenge, and only achievable with a significant extension of the technologies routinely used for tracking detectors in the past. This article describes the full-scale alignment procedure as it is used during LHC operations. Among the specific features of the method are the simultaneous determination of up to 200 000 alignment parameters with tracks, the measurement of individual sensor curvature parameters, the control of systematic misalignment effects, and the implementation of the whole procedure in a multi-processor environment for high execution speed. Overall, the achieved statistical accuracy on the module alignment is found to be significantly better than 10μm
Search for stop and higgsino production using diphoton Higgs boson decays
Results are presented of a search for a "natural" supersymmetry scenario with gauge mediated symmetry breaking. It is assumed that only the supersymmetric partners of the top-quark (stop) and the Higgs boson (higgsino) are accessible. Events are examined in which there are two photons forming a Higgs boson candidate, and at least two b-quark jets. In 19.7 inverse femtobarns of proton-proton collision data at sqrt(s) = 8 TeV, recorded in the CMS experiment, no evidence of a signal is found and lower limits at the 95% confidence level are set, excluding the stop mass below 360 to 410 GeV, depending on the higgsino mass
- …