1,378 research outputs found
Characterisation of Medipix3 Silicon Detectors in a Charged-Particle Beam
While designed primarily for X-ray imaging applications, the Medipix3 ASIC
can also be used for charged-particle tracking. In this work, results from a
beam test at the CERN SPS with irradiated and non-irradiated sensors are
presented and shown to be in agreement with simulation, demonstrating the
suitability of the Medipix3 ASIC as a tool for characterising pixel sensors.Comment: 16 pages, 13 figure
Ceratocystis ficicola causing a serious disease of Ficus carica in Greece
Ceratocystis ficicola causes vascular wilt of fig trees in Japan, invading root
systems and the main stems eventually leading to tree death. In surveys from 2018
to 2020 in fig orchards in Greece, this fungus was detected in two separated regions.
The fungus was consistently isolated from infected wood and from rhizosphere soil.
The isolates were identified based on multi-locus phylogenetic analyses of rpb2, bt1
and tef1 gene regions and detailed morphological characteristics, including comparisons
with an ex-type isolate of C. ficicola from Japan. The pathogenicity of Greek isolates
was proven on Ficus carica and F. benjamina plants. Ceratocystis ficicola is a soilborne
pathogen, and the occurrence of vascular wilt outbreaks suggest that the pathogen
spreads within and between orchards with infested soil and wood debris during
ploughing. The pathogen is also spreading in Greece with infected propagation material.
This is the first detailed report of C. ficicola outside Japan, and there is concern
over potential spread of the pathogen to other Mediterranean countries, where approx.
70% of the world fig production occurs.The Department of Science and Technology/National Research Foundation Center of Excellence in Plant Health Biotechnology, South Africa.https://oajournals.fupress.net/index.php/pmam2022BiochemistryForestry and Agricultural Biotechnology Institute (FABI)GeneticsMicrobiology and Plant Patholog
Measurement of the CKM angle Îł from a combination of B±âDh± analyses
A combination of three LHCb measurements of the CKM angle Îł is presented. The decays B±âD K± and
B±âDϱ are used, where D denotes an admixture of D0 and D0 mesons, decaying into K+Kâ, Ï+Ïâ, K±Ïâ, K±ÏâϱÏâ, K0SÏ+Ïâ, or K0S K+Kâ ïŹnal states. All measurements use a dataset corresponding to 1.0 fbâ1 of integrated luminosity. Combining results from B±âD K± decays alone a best-ïŹt value of
Îł =72.0⊠is found, and conïŹdence intervals are set
Îł â [56.4,86.7]⊠at 68% CL,
Îł â [42.6,99.6]⊠at 95% CL.
The best-ïŹt value of Îł found from a combination of results from B±âDϱ decays alone, is Îł =18.9âŠ,
and the conïŹdence intervals
Îł â [7.4,99.2]⊠âȘ [167.9,176.4]⊠at 68% CL
are set, without constraint at 95% CL. The combination of results from B± â D K± and B± â Dϱ
decays gives a best-ïŹt value of Îł =72.6⊠and the conïŹdence intervals
Îł â [55.4,82.3]⊠at 68% CL,
Îł â [40.2,92.7]⊠at 95% CL
are set. All values are expressed modulo 180âŠ, and are obtained taking into account the effect of D0âD0
mixing
Observation of two new baryon resonances
Two structures are observed close to the kinematic threshold in the mass spectrum in a sample of proton-proton collision data, corresponding
to an integrated luminosity of 3.0 fb recorded by the LHCb experiment.
In the quark model, two baryonic resonances with quark content are
expected in this mass region: the spin-parity and
states, denoted and .
Interpreting the structures as these resonances, we measure the mass
differences and the width of the heavier state to be
MeV,
MeV,
MeV, where the first and second
uncertainties are statistical and systematic, respectively. The width of the
lighter state is consistent with zero, and we place an upper limit of
MeV at 95% confidence level. Relative
production rates of these states are also reported.Comment: 17 pages, 2 figure
Recommended from our members
Effects of seismic devices on transverse responses of piers in the Sutong Bridge
The Sutong Bridge in China opened to traffic in 2008, and is an arterial connection between the cities of Nantong and Suzhou. It is a cable-stayed bridge with a main span of 1,088 m. Due to a tight construction schedule and lack of suitable seismic devices at the time, fixed supports were installed between the piers and the girder in the transverse direction. As a result, significant transverse seismic forces could occur in the piers and foundations, especially during a return period of a 2500-year earthquake. Therefore, the piers, foundations and fixed bearings had to be designed extraordinarily strong. However, when larger earthquakes occur, the bearings, piers and foundations are still vulnerable. The recent rapid developments in seismic technology and the performance-based design approach offer a better opportunity to optimize the transverse seismic design for the Sutong Bridge piers. The optimized design can be applied to the Sutong Bridge (as a retrofit), as well as other bridges. Seismic design alternatives utilizing viscous fluid dampers (VFD), or friction pendulum sliding bearings (FPSB), or transverse yielding metallic dampers (TYMD) are thoroughly studied in this work, and the results are compared with those from the current condition with fixed transverse supports and a hypothetical condition in which only sliding bearings are provided on top of the piers (the girder can move âfreelyâ in the transverse direction during the earthquake, except for frictional forces of the sliding bearings). Parametric analyses were performed to optimize the design of these proposed seismic devices. From the comparison of the peak bridge responses in these configurations, it was found that both VFD and TYMD are very effective in the reduction of transverse seismic forces in piers, while at the same time keeping the relative transverse displacements between piers and the box girder within acceptable limits. However, compared to VFD, TYMD do not interact with the longitudinal displacements of the girder, and have simpler details and lower initial and maintenance costs. Although the use of FPSB can also reduce seismic forces, it generally causes the transverse relative displacements to be higher than acceptable limits
Differential branching fraction and angular analysis of the decay B0âKâ0ÎŒ+ÎŒâ
The angular distribution and differential branching fraction of the decay B 0â K â0 ÎŒ + ÎŒ â are studied using a data sample, collected by the LHCb experiment in pp collisions at sâ=7 TeV, corresponding to an integrated luminosity of 1.0 fbâ1. Several angular observables are measured in bins of the dimuon invariant mass squared, q 2. A first measurement of the zero-crossing point of the forward-backward asymmetry of the dimuon system is also presented. The zero-crossing point is measured to be q20=4.9±0.9GeV2/c4 , where the uncertainty is the sum of statistical and systematic uncertainties. The results are consistent with the Standard Model predictions
Measurement of the relative rate of prompt Ïc0, Ïc1 and Ïc2 production at âs=7TeV
Prompt production of charmonium Ïc0, Ïc1 and Ïc2 mesons is studied using proton-proton collisions at the LHC at a centre-of-mass energy of âs=7TeV. The Ïc mesons are identified through their decay to J/ÏÎł, with J/ÏâÎŒ+muâ using photons that converted in the detector. A data sample, corresponding to an integrated luminosity of 1.0fbâ1 collected by the LHCb detector, is used to measure the relative prompt production rate of Ïc1 and Ïc2 in the rapidity range 2.0<y<4.5 as a function of the J/Ï transverse momentum from 3 to 20 GeV/c. First evidence for Ïc0 meson production at a hadron collider is also presented
Search for CP violation in D+âÏÏ+ and D+sâK0SÏ+ decays
A search for CP violation in D + â ÏÏ + decays is performed using data collected in 2011 by the LHCb experiment corresponding to an integrated luminosity of 1.0 fbâ1 at a centre of mass energy of 7 TeV. The CP -violating asymmetry is measured to be (â0.04 ± 0.14 ± 0.14)% for candidates with K â K + mass within 20 MeV/c 2 of the Ï meson mass. A search for a CP -violating asymmetry that varies across the Ï mass region of the D + â K â K + Ï + Dalitz plot is also performed, and no evidence for CP violation is found. In addition, the CP asymmetry in the D+sâK0SÏ+ decay is measured to be (0.61 ± 0.83 ± 0.14)%
Searches for B0(s)âJ/ÏppË and B+âJ/ÏppËÏ+ decays
The results of searches for B0(s)âJ/Ï ppÂŻ and B + â J/Ï p pÂŻ Ï+ decays are reported. The analysis is based on a data sample, corresponding to an integrated luminosity of 1.0 fbâ1 of pp collisions, collected with the LHCb detector. An excess with 2.8 Ï significance is seen for the decay B0sâJ/Ï ppÂŻ and an upper limit on the branching fraction is set at the 90 % confidence level: B(B0sâJ/Ï ppÂŻ) < 4.8 Ă 10â6, which is the first such limit. No significant signals are seen for B0 â J/Ï ppÂŻ and B+ â J/Ï ppÂŻ Ï + decays, for which the corresponding limits are set: B(B0âJ/Ï ppÂŻ) < 5.2 Ă 10â7, which significantly improves the existing limit; and B(B+âJ/Ï ppÂŻÏ+) < 5.0 Ă 10â7, which is the first limit on this branching fraction
Measurements of the branching fractions of B+âppK+ decays
The branching fractions of the decay B+ â ppÌK+ for different intermediate states are measured using data, corresponding to an integrated luminosity of 1.0 fb-1, collected by the LHCb experiment. The total branching fraction, its charmless component MppÌ < 2.85 GeV/c2 and the branching fractions via the resonant ccÌ states η c(1S) and Ï(2S) relative to the decay via a J/Ï intermediate state are [Equation not available: see fulltext.] Upper limits on the B + branching fractions into the η c(2S) meson and into the charmonium-like states X(3872) and X(3915) are also obtained
- âŠ