Fracturas supracondíleas sobre prótesis total de rodilla

Presentamos 7 casos de fractura del extreme distal del fémur en pacientes con sustitución total de rodilla. El propósito del estudio consiste en valorar las distintas opciones terapéuticas y los resultados obtenidos a medio plazo. Los enfermos fueron tratados quirúrgicamente mediante un clavo intramedular u ortopédicamente con un sistema de tracción de Neufeld de una férula de tipo Q.T.B. El método de tratamiento se decidió en función del grado de desplazamiento de la fractura, tiempo transcurrido desde la misma y estado general del paciente. Todos alcanzaron un nivel de actividad similar al que poseían previo a la fractura.We present 7 cases of supracondylar fracture of the femur in patients with total knee arthroplaty. The purpose of this study was to asses the different options of treatment and their results at mid-term. Fractures were treated with an intramedular nail or with a Neufeld traction system followed by a Q.T.B. cast. The method of treatment depends on the grade of fracture displacement, period of time since the fracture and patient health. All o them reached similar level of activity like before the fracture

High-pressure greenschist to blueschist facies transition in the Maimón Formation (Dominican Republic) suggests mid-Cretaceous subduction of the Early Cretaceous Caribbean Arc

The Maimón Formation (Cordillera Central, Dominican Republic) is formed of metamorphosed bi-modal mafic-felsic volcanic rocks and sedimentary horizons of Early Cretaceous age deposited in the forearc of the nascent Caribbean island arc. Two structural-metamorphic zones depict an inverted metamorphic gradient: the Ozama shear zone, which records intense mylonitic and phyllonitic deformation and ubiquitous metamorphic recrystallization, tectonically overlies the much less deformed and variably recrystallized rocks of the El Altar zone. The presence of ferri-winchite and high-Si phengite, first reported in this paper, in the peak metamorphic assemblage of rocks of the Ozama shear zone (actinolite + phengite + chlorite + epidote + quartz + albite ± ferri-winchite ± stilpnomelane) point to subduction-related metamorphism. Pseudosection calculations and intersection of isopleths indicate peak metamorphic conditions of ~ 8.2 kbar at 380 °C. These figures are consistent with metamorphism in the greenschist/blueschist facies transition, burial depths of ~ 25-29 km and a thermal gradient of ~ 13-16 °C/km. Our new data dispute previous models pointing to metamorphism of Maimón rocks under a steep thermal gradient related to burial under a hot peridotite slice. Instead, we contextualize the metamorphism of the Maimón Formation in a subduction scenario in which a coherent slice of the (warm) Early Cretaceous forearc was engulfed due to intra-arc complexities and regional-scale-driven tectonic processes operating in the late Early Cretaceous. Integration of our findings with previous studies on metamorphic complexes in Hispaniola suggests that a major tectonic event affecting the whole arc system took place at c. 120-110 Ma

Re-Os and U-Pb Geochronology of the Doña Amanda and Cerro Kiosko Deposits, Bayaguana District, Dominican Republic: Looking Down for the Porphyry Cu-Mo Roots of the Pueblo Viejo-Type Mineralization in the Island-Arc Tholeiitic Series of the Caribbean

Hosted in the Early Cretaceous bimodal tholeiite volcanic series of the Los Ranchos Formation, the Doña Amanda and Cerro Kiosko deposits in the Bayaguana district represent significant Au, Cu, and Ag resources in the Cordillera Oriental of the Dominican Republic. At Doña Amanda, a dense stockwork of quartz-sulfide veins is hosted by volcanic rocks with intense transitional phyllic-advanced argillic and silicic hydrothermal alteration assemblages, indicating a high-sulfidation environment. Wavy quartz veins with central sutures and rims of pyrite + enargite + molybdenite + fahlore (B veins) are cut by planar quartz-pyrite D veins. Primary fluid inclusions in quartz from B veins (Th: 160°->400°C; salinity: 7.9-16.4 wt % NaCl equiv) are interpreted as porphyry-type fluids. Inclusion fluids in quartz of quartz-pyrite veins (Th: 125°-175°C; salinity: 4.8-12.2 wt % NaCl equiv), quartz from silicic altered wall rocks (Th: 150°-175°C; salinity: 8.3-13.9 wt % NaCl equiv), and late, distal calcite veins (Th: 120°-160°C; salinity: 5.0-13.3 wt % NaCl equiv) indicate limited mixing with more dilute fluids and rule out mixing with fresh meteoric water. In Cerro Kiosko, a swarm of fault-controlled massive chalcopyrite + enargite + bornite + fahlore D veins and lodes are hosted by rocks with pervasive kaolinite alteration after sericite. δ34S values of vein sulfides from both deposits are all close to −2¿ and consistent with a predominance of magmatic sulfur and sulfide deposition from an oxidizing magmatic fluid. These data are consistent with a transitional environment between a deeper porphyry Cu(-Mo) and an overlying high-sulfidation epithermal deposit. An Re-Os age (112.6 ± 0.4 Ma) for molybdenite from the Doña Amanda deposit places the porphyry-epithermal mineralization as Early Cretaceous, coeval with the Los Ranchos Formation host rocks and with the Pueblo Viejo deposit. New sensitive high-resolution ion microprobe U-Pb ages on zircons from plagioclase-phyric rhyolite domes in the Bayaguana district are consistent with porphyry-high-sulfidation epithermal mineralization occurring along the Los Ranchos Formation during tonalite batholith emplacement in the basaltic island-arc basement at ca. 118 to 112 Ma and finalization of felsic volcanism at ca. 110 to 107 Ma

Secondary REE-minerals in the karst bauxites of the Bahoruco Peninsula (Dominican Republic)

Rare earth elements (REE) are essential for numerous technological applications. Currently about 90% of the worldwide REE demand is supplied by China (Hatch, 2012), and therefore REE are defined as critical metals (Dutta et al., 2016). Bauxites, the main source for Al in the world, gained interest since they are capable of concentrating significant amounts of REE (Liu et al., 2016), and have been recently considered unconventional deposits for REE (Goodenough et al., 2017). Two types of bauxitic deposits are defined: a) lateritic bauxites (formed after intense weathering of an Al-bearing protolith), and b) karst bauxites (of controversial origin, hosted in carbonaceous rocks). One hypothesis of karst bauxite formation suggests dissolution of the carbonates, whereas the other implies an external contribution of Al-bearing minerals during or after carbonate deposition (Bárdossy, 1982)

Geological, geochemical and mineralogical characteristics of REE-bearing Las Mercedes bauxite deposit, Dominican Republic

Bauxite deposits, traditionally the main source of 'aluminum, have been recently targeted for their remarkable contents in rare earth elements (REE). With Sigma REE (lanthanoids + Sc + Y) concentrations systematically higher than similar to 1400 ppm (ay. = 1530 ppm), the Las Mercedes karstic bauxites in the Dominican Republic rank as one of the REE-richest deposits of its style.The bauxitic ore in the Las Mercedes deposit is mostly unlithified and has a homogeneous-massive lithostructure, with only local cross-stratification and graded bedding. The dominant arenaceous and round-grained texture is composed of bauxite particles and subordinate ooids, pisoids and carbonate clasts. Mineralogically, the bauxite ore is composed mostly of gibbsite and lesser amounts of kaolinite, hematite, boehmite, anatase, goethite, chromian spinel and zircon. Identified REE-minerals include cerianite and monazite-Ce, whose composition accounts for the steady enrichment in light-relative to medium-and heavy-REE of the studied bauxites.Considering the paleo-geomorphology of the study area, we propose that bauxites in the Las Mercedes deposit are the product of the erosion and deposition of lithified bauxites located at higher elevations in the Bahoruco ranges. Based on the available data, we suggest a mixed lithological source for the bauxite deposits at the district scale: bedrock carbonates and an igneous source of likely mafic composition. (C) 2017 Elsevier B.V. All rights reserved

Multi-needle capacitance probe for non-conductive two-phase flows

Despite its variable degree of application, intrusive instrumentation is the most accurate way to obtain local information in a two-phase flow system, especially local interfacial velocity and local interfacial area parameters. In this way, multi-needle probes, based on conductivity or optical principles, have been extensively used in the past few decades by many researchers in two-phase flow investigations. Moreover, the signal processing methods used to obtain the time-averaged two-phase flow parameters in this type of sensor have been thoroughly discussed and validated by many experiments. The objective of the present study is to develop a miniaturized multi-needle probe, based on capacitance measurements applicable to a wide range of non-conductive two-phase flows and, thus, to extend the applicability of multi-needle sensor whilst also maintaining a signal processing methodology provided in the literature for conductivity probes. Results from the experiments performed assess the applicability of the proposed sensor measurement principle and signal processing method for the bubbly flow regime. These results also provide an insight into the sensor application for more complex two-phase flow regimes

Petrogenesis of volcanic rocks from the Maimón Formation (Dominican Republic): Geochemical record of the nascent Greater Antilles paleo-arc

Metamorphosed basalts, basaltic andesites, andesites and plagiorhyolites of the Early Cretaceous, probably pre-Albian, Maimón Formation, located in the Cordillera Central of the Dominican Republic, are some of the earliest products of the Greater Antilles arc magmatism. In this article, new whole-rock element and Nd-Pb radiogenic isotope data are used to give new insights into the petrogenesis of the Maimón meta-volcanic rocks and constrain the early evolution of the Greater Antilles paleo-arc system. Three different groups of mafic volcanic rocks are recognized on the basis of their immobile element contents. Group 1 comprises basalts with compositions similar to low-Ti island arc tholeiites (IAT), which are depleted in light rare earth elements (LREE) and resemble the forearc basalts (FAB) and transitional FAB-boninitic basalts of the Izu-Bonin-Mariana forearc. Group 2 rocks have boninite-like compositions relatively rich in Cr and poor in TiO2. Group 3 comprises low-Ti island arc tholeiitic basalts with near-flat chondrite-normalized REE patterns. Plagiorhyolites and rare andesites present near-flat to subtly LREE-depleted chondrite normalized patterns typical of tholeiitic affinity. Nd and Pb isotopic ratios of plagiorhyolites, which are similar to those of Groups 1 and 3 basalts, support that these felsic lavas formed by anatexis of the arc lower crust. Geochemical modelling points that the parental basic magmas of the Maimón meta-volcanic rocks formed by hydrous melting of a heterogeneous spinel-facies mantle source, similar to depleted MORB mantle (DMM) or depleted DMM (D-DMM), fluxed by fluids from subducted oceanic crust and Atlantic Cretaceous pelagic sediments. Variations of subduction-sensitive element concentrations and ratios from Group 1 to the younger rocks of Groups 2 and 3 generally match the geochemical progression from FAB-like to boninite and IAT lavas described in subduction-initiation ophiolites. Group 1 basalts likely formed at magmatic stages transitional between FAB and first-island arc magmatism, whereas Group 2 boninitic lavas resulted from focused flux melting and higher degrees of melt extraction in a more mature stage of subduction. Group 3 basalts probably represent magmatism taking place immediately before the establishment of a steady-state subduction regime. The relatively high extents of flux melting and slab input recorded in the Maimón lavas support a scenario of hot subduction beneath the nascent Greater Antilles paleo-arc. Paleotectonic reconstructions and the markedly depleted, though heterogeneous character of the mantle source, indicate the rise of shallow asthenosphere which had sourced mid-ocean ridge basalts (MORB) and/or back-arc basin basalts (BABB) in the proto-Caribbean domain prior to the inception of SW-dipping subduction. Relative to the neighbouring Aptian-Albian Los Ranchos Formation, we suggest that Maimón volcanic rocks extruded more proximal to the vertical projection of the subducting proto-Caribbean spreading ridge

Mineralogy, geochemistry and sulfur isotope characterization of Cerro de Maimón (Dominican Republic), San Fernando and Antonio (Cuba) lower Cretaceous VMS deposits: Formation during subduction initiation of the proto-Caribbean lithosphere within a fore-arc

The volcanic-arc Lower Cretaceous Maimón (Dominican Republic) and Los Pasos (Cuba) Formations, representative of the oldest magmatism recorded in the Caribbean island arc, host most of the known volcanogenic massive sulfide (VMS) deposits in the Greater Antilles. On the basis of new lithogeochemical data, basalts of the Maimón Formation are classified as fore arc basalts (FAB), boninites and less abundant low-Ti (LOTI) and normal island-arc tholeiites (IAT), and those of the Los Pasos Formation as LOTI and IAT. Felsic volcanics from the two formations are geochemically analogous and present mantle-type (M-type), boninitic and tholeiitic signatures, classifying as FIV-type, typical of post-Archaean VMS-bearing juvenile volcanic suites. This lithogeochemical data is indicative of formation in a fore-arc environment just after subduction initiation in association with initial extensional regimes and associated boninitic and tholeiitic melts that originated in the shallow mantle. Within this tectonic framework, rocks of the Los Pasos Formation and associated VMS deposits likely formed at a slightly later stage than those of the Maimón Formatio

Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal