378 research outputs found
Recommended from our members
Unified Modeling Suite for Two-Phase Flow, Convective Boiling and Condensation in Macro-and Micro-Channels
This paper was presented at the 4th Micro and Nano Flows Conference (MNF2014), which was held at University College, London, UK. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute, ASME Press, LCN London Centre for Nanotechnology, UCL University College London, UCL Engineering, the International NanoScience Community, www.nanopaprika.eu.The present paper focuses on the unified modeling suite for annular flow that the authors have and continue
to develop. Annular flow is of fundamental importance to the thermal design and simulation of microevaporators
and micro-condensers for compact two-phase cooling systems of high heat flux components for
the thermal management of computer chips, power electronics, laser diodes and high energy physics particle
detectors. First, the unified suite of methods is presented, illustrating in particular the most recent updates.
Then, results for convective evaporation of refrigerants in non-circular multi-microchannel configurations
for microelectronics cooling are presented and discussed. The annular flow suite includes models to predict
the void fraction, the entrained liquid fraction, the wall shear stress and pressure gradient, and a turbulence
model for momentum and heat transport inside the annular liquid film. The turbulence model, in particular,
allows prediction of the local average liquid film thicknesses and the local heat transfer coefficients during
convective evaporation and condensation. The benefit of a unified modeling suite is that all the included
prediction methods are consistently formulated and are proven to work well together, and provide a platform
for continued advancement based on the other models in the suite
Recommended from our members
On-chip micro-evaporation: Experimental evaluation of liquid pumping and vapor compression cooling systems
This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.Thermal designers of data centers and server manufacturers are showing a great concern regarding the cooling of new generation data centers, which are more compact and dissipate more power than is currently
possible to cool by conventional air conditioning systems. With very large data centers exceeding 100 000 servers,
some consume more than 50 MW [1] of electrical energy to operate, energy which is directly converted to heat and then simply wasted as it is dissipated into the atmosphere. A potentially significantly better solution would be to make use of on-chip two-phase cooling [2], which, besides improving the cooling performance at the chip level, also adds the capability to reuse the waste heat in a convenient manner, since higher evaporating and condensing
temperatures of the two-phase cooling system (from 60-95°C) are possible with such a new green cooling technology. In the present project, two such two-phase cooling cycles using micro-evaporation technology were
experimentally evaluated with specific attention being paid to energy consumption, overall exergetic efficiency and controllability. The main difference between the two cooling cycles is the driver, where both a mini-compressor and a gear pump were considered. The former has the advantage due to its appeal of energy recovery since its exergy potential is higher and the waste heat is exported at a higher temperature for reuse.This study is supported by: the Swiss Commission for Technology and Innovation (CTI) contract number 6862.2; the LTCM laboratory; IBM Zürich Research
Laboratory (Switzerland) and Embraco (Brazil)
Recommended from our members
Development of interconnected silicon micro-evaporators for the on-detector electronics cooling of the future ITS detector in the ALICE experiment at LHC
This paper was presented at the 4th Micro and Nano Flows Conference (MNF2014), which was held at University College, London, UK. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute, ASME Press, LCN London Centre for Nanotechnology, UCL University College London, UCL Engineering, the International NanoScience Community, www.nanopaprika.eu.The design of the future High Energy Physics (HEP) particle detectors for the upgrade of the LHC (Large Hadron Collider) experiments at CERN (European Organization for Nuclear Research) is pushing technological frontiers to the limit trying to reach unprecedented accuracy in particles identification and particle production dynamics in ultra-relativistic hadron collisions. The thermal management of the on-detector electronics and the development of low mass integrated cooling systems have become a crucial task in the design of silicon tracking detectors for HEP applications. In this paper, we present a novel concept of low mass interconnected silicon microchannel devices for the future Inner Tracking System of the ALICE (A Large Ion Collider Experiment) detector at LHC. This innovative design achieves the requirements of the detector while minimizing the total material budget
Enhancements of nucleate boiling under microgravity conditions
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/76852/1/AIAA-2000-853-986.pd
Towards the clinical implementation of pharmacogenetics in bipolar disorder.
BackgroundBipolar disorder (BD) is a psychiatric illness defined by pathological alterations between the mood states of mania and depression, causing disability, imposing healthcare costs and elevating the risk of suicide. Although effective treatments for BD exist, variability in outcomes leads to a large number of treatment failures, typically followed by a trial and error process of medication switches that can take years. Pharmacogenetic testing (PGT), by tailoring drug choice to an individual, may personalize and expedite treatment so as to identify more rapidly medications well suited to individual BD patients.DiscussionA number of associations have been made in BD between medication response phenotypes and specific genetic markers. However, to date clinical adoption of PGT has been limited, often citing questions that must be answered before it can be widely utilized. These include: What are the requirements of supporting evidence? How large is a clinically relevant effect? What degree of specificity and sensitivity are required? Does a given marker influence decision making and have clinical utility? In many cases, the answers to these questions remain unknown, and ultimately, the question of whether PGT is valid and useful must be determined empirically. Towards this aim, we have reviewed the literature and selected drug-genotype associations with the strongest evidence for utility in BD.SummaryBased upon these findings, we propose a preliminary panel for use in PGT, and a method by which the results of a PGT panel can be integrated for clinical interpretation. Finally, we argue that based on the sufficiency of accumulated evidence, PGT implementation studies are now warranted. We propose and discuss the design for a randomized clinical trial to test the use of PGT in the treatment of BD
Absence of Fas-L aggravates renal injury in acute Trypanosoma cruzi infection
Trypanosoma cruzi infection induces diverse alterations in immunocompetent cells and organs, myocarditis and congestive heart failure. However, the physiological network of disturbances imposed by the infection has not been addressed thoroughly. Regarding myocarditis induced by the infection, we observed in our previous work that Fas-L-/- mice (gld/gld) have very mild inflammatory infiltration when compared to BALB/c mice. However, all mice from both lineages die in the early acute phase. Therefore, in this work we studied the physiological connection relating arterial pressure, renal function/damage and cardiac insufficiency as causes of death. Our results show that a broader set of dysfunctions that could be classified as a cardio/anaemic/renal syndrome is more likely responsible for cardiac failure and death in both lineages. However, gld/gld mice had very early glomerular deposition of IgM and a more intense renal inflammatory response with reduced renal filtration, which is probably responsible for the premature death in the absence of significant myocarditis in gld/gld.Instituto Oswaldo Cruz-Fiocruz Laboratório de Biologia CelularUniversidade Federal do Rio de Janeiro Instituto de Biofísica Carlos Chagas FilhoUniversidade Federal Fluminense Instituto Biomédico Departamento de Fisiologia e FarmacologiaUniversidade Federal de São Paulo (UNIFESP) Escola Paulista de Medicina Disciplina de NefrologiaCentro de Criação de Animais de Laboratório Departamento de Controle de Qualidade AnimalUNIFESP, EPM, Disciplina de NefrologiaSciEL
Cost-effectiveness of microendoscopic discectomy versus conventional open discectomy in the treatment of lumbar disc herniation: a prospective randomised controlled trial [ISRCTN51857546]
BACKGROUND: Open discectomy is the standard surgical procedure in the treatment of patients with long-lasting sciatica caused by lumbar disc herniation. Minimally invasive approaches such as microendoscopic discectomy have gained attention in recent years. Reduced tissue trauma allows early ambulation, short hospital stay and quick resumption of daily activities. A comparative cost-effectiveness study has not been performed yet. We present the design of a randomised controlled trial on cost-effectiveness of microendoscopic discectomy versus conventional open discectomy in patients with lumbar disc herniation. METHODS/DESIGN: Patients (age 18–70 years) presenting with sciatica due to lumbar disc herniation lasting more than 6–8 weeks are included. Patients with disc herniation larger than 1/3 of the spinal canal diameter, or disc herniation less than 1/3 of the spinal canal diameter with concomitant lateral recess stenosis or sequestration, are eliglible for participation. Randomisation into microendoscopic discectomy or conventional unilateral transflaval discectomy will take place in the operating room after induction of anesthesia. The length of skin incision is equal in both groups. The primary outcome measure is the functional assessment of the patient, measured by the Roland Disability Questionnaire for Sciatica, at 8 weeks and 1 year after surgery. We will also evaluate several other outcome parameters, including perceived recovery, leg and back pain, incidence of re-operations, complications, serum creatine kinase, quality of life, medical consumption, absenteeism and costs. The study is a randomised prospective multi-institutional trial, in which two surgical techniques are compared in a parallel group design. Patients and research nurses are kept blinded of the allocated treatment during the follow-up period of 2 years. DISCUSSION: Currently, open discectomy is the golden standard in the surgical treatment of lumbar disc herniation. Whether microendoscopic discectomy is more cost-effective than unilateral transflaval discectomy has to be determined by this trial
Studying the Underlying Event in Drell-Yan and High Transverse Momentum Jet Production at the Tevatron
We study the underlying event in proton-antiproton collisions by examining
the behavior of charged particles (transverse momentum pT > 0.5 GeV/c,
pseudorapidity |\eta| < 1) produced in association with large transverse
momentum jets (~2.2 fb-1) or with Drell-Yan lepton-pairs (~2.7 fb-1) in the
Z-boson mass region (70 < M(pair) < 110 GeV/c2) as measured by CDF at 1.96 TeV
center-of-mass energy. We use the direction of the lepton-pair (in Drell-Yan
production) or the leading jet (in high-pT jet production) in each event to
define three regions of \eta-\phi space; toward, away, and transverse, where
\phi is the azimuthal scattering angle. For Drell-Yan production (excluding the
leptons) both the toward and transverse regions are very sensitive to the
underlying event. In high-pT jet production the transverse region is very
sensitive to the underlying event and is separated into a MAX and MIN
transverse region, which helps separate the hard component (initial and
final-state radiation) from the beam-beam remnant and multiple parton
interaction components of the scattering. The data are corrected to the
particle level to remove detector effects and are then compared with several
QCD Monte-Carlo models. The goal of this analysis is to provide data that can
be used to test and improve the QCD Monte-Carlo models of the underlying event
that are used to simulate hadron-hadron collisions.Comment: Submitted to Phys.Rev.
Observation of the Baryonic Flavor-Changing Neutral Current Decay Lambda_b -> Lambda mu+ mu-
We report the first observation of the baryonic flavor-changing neutral
current decay Lambda_b -> Lambda mu+ mu- with 24 signal events and a
statistical significance of 5.8 Gaussian standard deviations. This measurement
uses ppbar collisions data sample corresponding to 6.8fb-1 at sqrt{s}=1.96TeV
collected by the CDF II detector at the Tevatron collider. The total and
differential branching ratios for Lambda_b -> Lambda mu+ mu- are measured. We
find B(Lambda_b -> Lambda mu+ mu-) = [1.73+-0.42(stat)+-0.55(syst)] x 10^{-6}.
We also report the first measurement of the differential branching ratio of B_s
-> phi mu+ mu- using 49 signal events. In addition, we report branching ratios
for B+ -> K+ mu+ mu-, B0 -> K0 mu+ mu-, and B -> K*(892) mu+ mu- decays.Comment: 8 pages, 2 figures, 4 tables. Submitted to Phys. Rev. Let
Measurement of the Production Cross Section and Search for Anomalous and Couplings in Collisions at TeV
This Letter describes the current most precise measurement of the boson
pair production cross section and most sensitive test of anomalous
and couplings in collisions at a center-of-mass energy of 1.96
TeV. The candidates are reconstructed from decays containing two charged
leptons and two neutrinos, where the charged leptons are either electrons or
muons. Using data collected by the CDF II detector from 3.6 fb of
integrated luminosity, a total of 654 candidate events are observed with an
expected background contribution of events. The measured total
cross section is pb, which is in good agreement
with the standard model prediction. The same data sample is used to place
constraints on anomalous and couplings.Comment: submitted to Phys. Rev. Let
- …