Adsorption of Cd, Cu, Ni and Zn in tropical soils under competitive and non-competitive systems

The adsorption of heavy metals in soils affects their behavior in the environment and their bioavailability to plants. The knowledge of the adsorption mechanisms in competitive systems allows a more realistic evaluation of the metals' behavior in the soil than the single metal adsorption. The objectives of this study were (i) to evaluate Cd, Cu, Ni, and Zn adsorption in 14 surface samples (0-0.2 m) of representative soils of the Brazilian humid-tropical region, in competitive and non-competitive systems, and (ii) to establish metal affinity sequences for each soil, based in the maximum adsorption capacity (MAC) estimated by the Langmuir model. The Rhodic Eutrudox, the Kandiudalf Eutrudox, the Arenic Hapludalf, the Arenic Hapludult and the Typic Argiudoll had the highest metals' adsorption capacity, whereas the Typic Quartzipsamment and the sandy-textured Arenic Hapludult had the lowest values. In general, the MAC values for metals were lower in the competitive than in the non-competitive system. In the non-competitive system, the most common affinity sequence was Cu > Zn > Ni > Cd, whereas the most common sequence was Cu > Cd > Zn > Ni in the competitive system. In general, the Langmuir model fitted well the adsorption data of metals on the studied soils.A adsorção de metais pesados em solos afeta seu comportamento e biodisponibilidade às plantas. O conhecimento dos mecanismos de adsorção em sistemas competitivos permite uma avaliação mais realista do comportamento dos metais no solo do que estudos com adsorção de cada metal, isoladamente. Os objetivos desse trabalho foram: (i) avaliar a adsorção de Cd, Cu, Ni e Zn em amostras superficiais (0-0,2 m) de 14 solos representativos da região tropical úmida, em sistema competitivo e não-competitivo, e (ii) estabelecer sequências de afinidade metálica para cada solo, com base nos valores de capacidade máxima de adsorção (CMA) dos metais estimados por meio do modelo de Langmuir. O Rhodic Eutrudox, o Kandiudalfic Eutrudox, o Arenic Hapludalf (Alf2), o Arenic Hapludult (Ult2) e o Typic Argiudoll apresentaram elevadas capacidades de adsorção dos metais, ocorrendo o inverso para o Typic Quartzipsamment e para o Arenic Hapludult textura arenosa. No geral, a CMA dos metais aos solos foi menor no sistema competitivo. A sequência de afinidade mais comumente encontrada no sistema não-competitivo foi Cu > Zn > Ni > Cd. No sistema competitivo, a sequência foi Cu > Cd > Zn > Ni. Em geral, o modelo de Langmuir simulou de maneira satisfatória a adsorção dos metais nas amostras de solo

Search for single top quarks in the tau+jets channel using 4.8 fb−1^{-1} of ppˉp\bar{p} collision data

We present the first direct search for single top quark production using tau leptons. The search is based on 4.8 fb$^{-1}$ of integrated luminosity collected in $p\bar{p}$ collisions at $\sqrt{s}$=1.96 TeV with the D0 detector at the Fermilab Tevatron Collider. We select events with a final state including an isolated tau lepton, missing transverse energy, two or three jets, one or two of them $b$ tagged. We use a multivariate technique to discriminate signal from background. The number of events observed in data in this final state is consistent with the signal plus background expectation. We set in the tau+jets channel an upper limit on the single top quark cross section of \TauLimObs pb at the 95% C.L. This measurement allows a gain of 4% in expected sensitivity for the observation of single top production when combining it with electron+jets and muon+jets channels already published by the D0 collaboration with 2.3 fb$^{-1}$ of data. We measure a combined cross section of \SuperCombineXSall pb, which is the most precise measurement to date.Comment: 12 pages, 5 figure

b-Jet Identification in the D0 Experiment

Algorithms distinguishing jets originating from b quarks from other jet flavors are important tools in the physics program of the D0 experiment at the Fermilab Tevatron p-pbar collider. This article describes the methods that have been used to identify b-quark jets, exploiting in particular the long lifetimes of b-flavored hadrons, and the calibration of the performance of these algorithms based on collider data.Comment: submitted to Nuclear Instruments and Methods in Physics Research

Measurement of the dijet invariant mass cross section in proton anti-proton collisions at sqrt{s} = 1.96 TeV

The inclusive dijet production double differential cross section as a function of the dijet invariant mass and of the largest absolute rapidity of the two jets with the largest transverse momentum in an event is measured in proton anti-proton collisions at sqrt{s} = 1.96 TeV using 0.7 fb^{-1} integrated luminosity collected with the D0 detector at the Fermilab Tevatron Collider. The measurement is performed in six rapidity regions up to a maximum rapidity of 2.4. Next-to-leading order perturbative QCD predictions are found to be in agreement with the data.Comment: Published in Phys. Lett. B, 693, (2010), 531-538, 8 pages, 2 figures, 6 table

Measurement of Z/gamma*+jet+X angular distributions in ppbar collisions at sqrt{s}=1.96 TeV

We present the first measurements at a hadron collider of differential cross sections for Z+jet+X production in delta phi(Z, jet), |delta y(Z, jet)| and |y_boost(Z, jet)|. Vector boson production in association with jets is an excellent probe of QCD and constitutes the main background to many small cross section processes, such as associated Higgs production. These measurements are crucial tests of the predictions of perturbative QCD and current event generators, which have varied success in describing the data. Using these measurements as inputs in tuning event generators will increase the experimental sensitivity to rare signals.Comment: Published in Physics Letters B 682 (2010), pp. 370-380. 15 pages, 6 figure

Search for the standard model Higgs boson in tau final states

We present a search for the standard model Higgs boson using hadronically decaying tau leptons, in 1 inverse femtobarn of data collected with the D0 detector at the Fermilab Tevatron ppbar collider. We select two final states: tau plus missing transverse energy and b jets, and tau+ tau- plus jets. These final states are sensitive to a combination of associated W/Z boson plus Higgs boson, vector boson fusion and gluon-gluon fusion production processes. The observed ratio of the combined limit on the Higgs production cross section at the 95% C.L. to the standard model expectation is 29 for a Higgs boson mass of 115 GeV.Comment: publication versio

Search for W' bosons decaying to an electron and a neutrino with the D0 detector

This Letter describes the search for a new heavy charged gauge boson W' decaying into an electron and a neutrino. The data were collected with the D0 detector at the Fermilab Tevatron proton-antiproton Collider at a center-of-mass energy of 1.96 TeV, and correspond to an integrated luminosity of about 1 inverse femtobarn. Lacking any significant excess in the data in comparison with known processes, an upper limit is set on the production cross section times branching fraction, and a W' boson with mass below 1.00 TeV can be excluded at the 95% C.L., assuming standard-model-like couplings to fermions. This result significantly improves upon previous limits, and is the most stringent to date.Comment: submitted to Phys. Rev. Let

Search for scalar bottom quarks and third-generation leptoquarks in ppbar collisions at sqrt(s) = 1.96 TeV

We report the results of a search for pair production of scalar bottom quarks (sbottom) and scalar third-generation leptoquarks in 5.2 fb-1 of ppbar collisions at the D0 experiment of the Fermilab Tevatron Collider. Scalar bottom quarks are assumed to decay to a neutralino and a $b$ quark, and we set 95% C.L. lower limits on their production in the (m_sbottom, m_neutralino) mass plane such as m_sbottom>247 GeV for m_neutralino=0 and m_neutralino>110 GeV for 160<m_sbottom<200 GeV. The leptoquarks are assumed to decay to a tau neutrino and a $b$ quark, and we set a 95% C.L. lower limit of 247 GeV on the mass of a charge-1/3 third-generation scalar leptoquark.Comment: Published by Phys. Lett.

Search for a scalar or vector particle decaying into Zgamma in ppbar collisions at sqrt(s) = 1.96 TeV

We present a search for a narrow scalar or vector resonance decaying into Zgamma with a subsequent Z decay into a pair of electrons or muons. The data for this search were collected with the D0 detector at the Fermilab Tevatron ppbar collider at a center of mass energy sqrt(s) = 1.96 TeV. Using 1.1 (1.0) fb-1 of data, we observe 49 (50) candidate events in the electron (muon) channel, in good agreement with the standard model prediction. From the combination of both channels, we derive 95% C.L. upper limits on the cross section times branching fraction (sigma x B) into Zgamma. These limits range from 0.19 (0.20) pb for a scalar (vector) resonance mass of 600 GeV/c^2 to 2.5 (3.1) pb for a mass of 140 GeV/c^2.Comment: Published by Phys. Lett.

Measurement of the Isolated Photon Cross Section in p-pbar Collisions at sqrt{s}=1.96 TeV

The cross section for the inclusive production of isolated photons has been measured in p anti-p collisions at sqrt{s}=1.96 TeV with the D0 detector at the Fermilab Tevatron Collider. The photons span transverse momenta 23 to 300 GeV and have pseudorapidity |eta|<0.9. The cross section is compared with the results from two next-to-leading order perturbative QCD calculations. The theoretical predictions agree with the measurement within uncertainties.Comment: 7 pages, 5 figures, submitted to Phys.Lett.