Bimetallic Pt(II)-bipyridyl-diacetylide/Ln(III) tris-diketonate adducts based on a combination of coordinate bonding and hydrogen bonding between the metal fragments: syntheses, structures and photophysical properties

The luminescent Pt(II) complex [Pt(4,4'-Bu-t(2)-bipy){CC-(5-pyrimidinyl)}(2)] (1) was prepared by coupling of [Pt(4,4'-Bu-t(2)-bipy)Cl-2] with 5-ethynyl-pyrimidine, and contains two pyrimidinyl units pendant from a Pt(H) bipyridyl diacetylide core; it shows luminescence at 520 nm which is typical of Pt(II) luminophores of this type. Reaction with [Ln(hfac)(3)(H2O)(2)] (hfac = anion of hexafluoroacetylacetone) affords as crystalline solids the compounds [1 center dot {Ln(hfac)(3)(H2O)}{Ln(hfac)(3)(H2O)(2)}] (Ln = Nd, Gd, Er, Yb), in which the {Ln(hfac)(3)(H2O)} unit is coordinated to one pyrimidine ring via an N atom, whereas the {Ln(hfac)(3)(H2O)(2)} unit is associated with two N atoms, one from each pyrimidine ring of 1, via N center dot center dot center dot HOH hydrogen-bonding interactions involving the coordinated water ligands on the lanthanide centre. Solution spectroscopic studies show that the luminescence of 1 is partly quenched on addition of [Ln(hfac)(3)(H2O)(2)] (Ln = Er, Nd) by formation of Pt(II)/Ln(III) adducts in which Pt(II)-> Ln(III) photoinduced energy-transfer occurs to the low-lying f-f levels of the Ln(Ill) centre. Significant quenching occurs with both Er(Ill) and Nd(III) because both have several f-f states which match well the (MLCT)-M-3 emission energy of 1. Time-resolved luminescence studies show that Pt(II)-Er(III) energy-transfer (7.0 x 10(7) M-1) is around three times faster than Pt(II)-> Nd(III) energy-transfer (approximate to 2 x 10(7) M-1) over the same distance because the luminescence spectrum of l overlaps better with the absorption spectrum of Er(111) than with Nd(III). In contrast Yb(111) causes no significant quenching of 1 because it has only a single f-f excited level which is a poor energy match for the Pt(II)-based excited state

Research Treatment Studies for Cleanable Waste Water for Cleaning Pipes

Currently, many methods of treating waste water are known using various lubricating coolant compositions, but there is no universal treatment method. The most suitable ways of reducing the harmful impact of waste water in the metallurgical industry on the water environment are 1) the local treatment of waste water of various compositions, 2) the removal or reduction of the total amount of waste treatment liquid emissions as a result of their regeneration, and 3) reuse of treated waste water in closed water circulation systems and technical water supply to enterprises. During production of bimetallic finned tubes by cold deformation method, alkaline cleaning solutions are used to clean the surface from lubricating-cooling liquid. As a result, there is a need to dispose of spent liquids. The spent detergent solution is a three-phase emulsion. The upper layer is oil-oil products, medium liquid with increased PH index, and aluminates precipitate. A spent emulsion, i.e. an end-of-life emulsion that has lost its functional and operational properties, needs to be decomposed and disposed of. Keywords: finned bimetallic tube, air cooler, lubricating coolant, oil – emulsio

Improvement of Efficiency of Air Cooling Devices By Creation of Independent Modules with Evolvent Profile Composition of Finned Tubes

An analysis of the composition of the heat-exchange equipment at the petrochemical plants reveals that nominally more than 30% (and by weight about 50% of the total equipment) is heat-exchange equipment, including air-cooled units requiring replacement and reconstruction as a result of the end of their service life or corrosion erosion wear. Therefore, work aimed at improving the effectiveness of ABO is relevant. The existing problem of reducing the efficiency of air cooling in hot calm weather is compounded by the need for short-term humidification using a humidifier mounted directly behind the fan wheel when the air enters the diffuser. This dramatically increases the processes of corrosion and the formation of deposits on the surface of finned tubes (scale, fluff and dust). We have carried out a set of computational and experimental studies to evaluate the thermal efficiency of small-sized ABOs of various designs using a universal experimental industrial bench. The results of studies have established that vertical-cylindrical ABO designs are more energy-efficient and less metal-intensive compared to typical horizontal ones and allow for the influx of cold atmospheric air to the ABO inlet during the hot season. Keywords: air cooler; heat transfer coefficient; thermal efficiency; design of a vertical cylindrical air-cooling apparatus; involute profile layou

Lanthanoid/Alkali Metal ß-Triketonate Assemblies: A Robust Platform for Efficient NIR Emitters.

The reaction of hydrated lanthanoid chlorides with tribenzoylmethane and an alkali metal hydroxide consistently resulted in the crystallization of neutral tetranuclear assemblies with the general formula [Ln(Ae⋅HOEt)(L)4]2 (Ln=Eu3+, Er3+, Yb3+; Ae=Na+, K+, Rb+). Analysis of the crystal structures of these species revealed a coordination geometry that varied from a slightly distorted square antiprism to a slightly distorted triangular dodecahedron, with the specific geometrical shape being dependent on the degree of lattice solvation and identity of the alkali metal. The near-infrared (NIR)-emitting assemblies of Yb3+ and Er3+ showed remarkably efficient emission, characterized by significantly longer excited-state lifetimes (τobs≈37–47 μs for Yb3+ and τobs≈4–6 μs for Er3+) when compared with the broader family of lanthanoid β-diketonate species, even in the case of perfluorination of the ligands. The Eu3+ assemblies show bright red emission and a luminescence performance (τobs≈0.5 ms, equation image≈35–37 %, ηsens≈68–70 %) more akin to the β-diketonate species. The results highlight that the β-triketonate ligand offers a tunable and facile system for the preparation of efficient NIR emitters without the need for more complicated perfluorination or deuteration synthetic strategies

Di-μ-sulfato-κ4 O:O′-bis­[diaqua­(1H-imidazo[4,5-f][1,10]phenanthroline-κ2 N 7,N 9)cobalt(II)] dihydrate

In the centrosymmetric dinuclear title compound, [Co2(SO4)2(C13H8N4)2(H2O)4]·2H2O, the CoII atom is coord­in­ated by two N atoms from two 1H-imidazo[4,5-f][1,10]phenanthroline ligands, two O atoms from two sulfate anions and two O atoms from water mol­ecules in a distorted octa­hedral geometry. The Co⋯Co separation is 5.1167 (7) Å. The coordinated and uncoordinated water mol­ecules engage in N—H⋯O and O—H⋯O hydrogen-bonding inter­actions

Probing the effect of ß-triketonates in visible and NIR emitting lanthanoid complexes

An isomorphous series of lanthanoid complexes containing tribenzoylmethanide (tbm) and 1,10-phenanthroline (phen) ligands has been synthesised and structurally characterised. These complexes, formulated as [Ln(phen)(tbm)3] (Ln = Eu3+, Er3+ and Yb3+), were compared with analogous dibenzoylmethanide (dbm) [Ln(phen)(dbm)3] complexes to investigate the effect of changing ß-diketonate to ß-triketonate ligands on the photophysical properties of the complex. The photophysical properties for the Eu3+ complexes were similar for both systems, whereas a modest enhancement was observed for Yb3+ and Er3+ moving from the dbm to the tbm complexes. A detailed study of the NIR photophysical properties was achieved by adapting the integrating sphere method for the calculation of overall quantum yields in the solid state

Green phosphorescence and electroluminescence of sulfur pentafluoride-functionalized cationic iridium(III) complexes

EZ-C acknowledges the University of St Andrews for financial support.We report four cationic iridium(III) complexes [Ir(C^N)2(dtBubpy)](PF6) that have sulfurpentafluoride-modified 1-phenylpyrazole and 2-phenylpyridine cyclometalating (C^N) ligands (dtBubpy = 4,4'-di-tert-butyl-2,2'-bipyridyl). Three of the complexes were characterized by single-crystal X-ray structure analysis. In cyclic voltammetry, the complexes undergo reversible oxidation of iridium(III) and irreversible reduction of the SF5 group. They emit bright green phosphorescence in acetonitrile solution and in thin films at room temperature, with emission maxima between 482–519 nm and photoluminescence quantum yields of up to 79%. The electron-withdrawing sulfur pentafluoride group on the cyclometalating ligands increases the oxidation potential and the redox gap and blue-shifts the phosphorescence of the iridium complexes more than do the commonly-employed fluoro and trifluoromethyl groups. The irreversible reduction of the SF5 group may be a problem in organic electronics; for example, the complexes do not exhibit electroluminescence in light-emitting electrochemical cells (LEECs). Nevertheless, the complexes exhibit green to yellow-green electroluminescence in doped multilayer organic light-emitting diodes (OLEDs) with emission maxima ranging from 501–520 nm and with an external quantum efficiency (EQE) of up to 1.7% in solution-processed devices.PostprintPeer reviewe

5,6-Di­oxo-1,10-phenanthrolin-1-ium trifluoro­methane­sulfonate

In the structure of the title salt, C12H7N2O2 +·CF3SO3 −, the cation participates in hydrogen bonding with the dione group of an adjacent cation as well as with the trifluoro­methane­sulfonate anion. In addition, there is an extensive network of C—H⋯O inter­actions between the cations and anions. There are two formula units per asymmetric unit. The crystal studied exhibits inversion twinning

Investigation of the Photophysical Properties of a Eu3+ Coordination Polymer Bearing an α-Nitrile Substituted β-Diketonate Ligand via Emission and Ultrafast Transient Absorption Spectroscopy

Reaction of the β-diketone ligand, 2-cyano-1,3-phenyl-1,3-propandione (LH), with hydrated EuCl3 in the presence of 1,10-phenanthroline (Phen), results in the crystallisation of a one-dimensional Eu3+ coordination polymer of formulation [Eu(Phen)(L)3]∞, formed by coordination of the nitrile group of an O,O′-bound ligand to a neighbouring metal centre. An investigation of the metal-centred emission of the polymer, both in the solid state and solution, revealed red emission characterised by relatively long-lived excited state lifetimes and high intrinsic quantum yields. However, analysis of the overall quantum yield and sensitisation efficiency reveals that ultrafast processes in the ligand potentially inhibit Eu3+ sensitisation. Further investigations into these processes using transient absorption spectroscopy suggest that substitution at the α-C position may significantly decrease sensitisation via the antenna effect

Exploring excited states of Pt(ii) diimine catecholates for photoinduced charge separation

The intense absorption in the red part of the visible range, and the presence of a lowest charge-transfer excited state, render Platinum(II) diimine catecholates potentially promising candidates for light-driven applications. Here, we test their potential as sensitisers in dye-sensitised solar cells and apply, for the first time, the sensitive method of photoacoustic calorimetry (PAC) to determine the efficiency of electron injection in the semiconductor from a photoexcited Pt(II) complex. Pt(II) catecholates containing 2,2′-bipyridine-4,4′-di-carboxylic acid (dcbpy) have been prepared from their parent iso-propyl ester derivatives, complexes of 2,2′-bipyridine-4,4′-di-C(O)OiPr, (COOiPr)2bpy, and their photophysical and electrochemical properties studied. Modifying diimine Pt(II) catecholates with carboxylic acid functionality has allowed for the anchoring of these complexes to thin film TiO2, where steric bulk of the complexes (3,5-ditBu-catechol vs. catechol) has been found to significantly influence the extent of monolayer surface coverage. Dye-sensitised solar cells using Pt(dcbpy)(tBu2Cat), 1a, and Pt(dcbpy)(pCat), 2a, as sensitisers, have been assembled, and photovoltaic measurements performed. The observed low, 0.02–0.07%, device efficiency of such DSSCs is attributed at least in part to the short excited state lifetime of the sensitisers, inherent to this class of complexes. The lifetime of the charge-transfer ML/LLCT excited state in Pt((COOiPr)2bpy)(3,5-di-tBu-catechol) was determined as 250 ps by picosecond time-resolved infrared spectroscopy, TRIR. The measured increase in device efficiency for 2a over 1a is consistent with a similar increase in the quantum yield of charge separation (where the complex acts as a donor and the semiconductor as an acceptor) determined by PAC, and is also proportional to the increased surface loading achieved with 2a. It is concluded that the relative efficiency of devices sensitised with these particular Pt(II) species is governed by the degree of surface coverage. Overall, this work demonstrates the use of Pt(diimine)(catecholate) complexes as potential photosensitizers in solar cells, and the first application of photoacoustic calorimetry to Pt(II) complexes in general