Advances and perspectives from a decade of collaborative efforts on zeolites for selective catalytic reduction of NOx

[EN] Nitrogen oxides (NOx) is a major air pollutant and its release is regulated by increasingly stringent legislation. Selective catalytic reduction using ammonia as a reductant (NH3-SCR) is the most widely applied method to reduce NOx from diesel vehicle exhaust. Significant technological achievements have been developed in the last 10-15 years to minimize NOx by NH3-SCR, particularly using Cu-containing small-pore zeolites as active and stable catalysts. In the present perspective, we highlight some of the most noteworthy advances achieved by industry and academia on the understanding of the unique reaction mechanism of NH3-SCR over Cu-zeolites. With the increased understanding, researchers have been able to rationalize the design and realization of new Cu-zeolite catalysts. Although light-duty diesel vehicles will be electrified in the near future, heavy-duty diesel vehicles will continue to play a large role in future powertrain solutions even beyond 2030. Hence, we highlight some of the challenges and perspectives moving forward.This work has been supported by Umicore and by the Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR, and by Generalitat Valenciana through AICO/2021/201.Vennestrøm, PN.; Thogersen, JR.; Gabrielsson, PLT.; Van Tendeloo, L.; Schütze, FW.; Moliner Marin, M. (2022). Advances and perspectives from a decade of collaborative efforts on zeolites for selective catalytic reduction of NOx. Microporous and Mesoporous Materials. 358:1-12. https://doi.org/10.1016/j.micromeso.2022.11233611235

NH3-SCR catalysts for heavy-duty diesel vehicles: Preparation of CHA-type zeolites with low-cost templates

Computer-assistance allows selecting the most adequate low-cost organic structure directing agents (OSDAs) for the crystallization of Al-rich CHA-type zeolites. The host-guest stabilization energies of tetraethylammonium (TEA), methyltriethylammonium (MTEA) and dimethyldiethylammonium (DMDEA), in combination with Na, were first theoretically evaluated. This “ab-initio” analysis reveals that two TEA show a serious steric hindrance in a cha cavity, whereas two MTEA would present excellent host-guest confinements. The synthesis of Al-rich CHA-type zeolites has been accomplished using TEA and MTEA. Electron diffraction and high-resolution transmission electron microscopy reveal large CHA-domains with narrow faulted GME-domains in the CHA-type material synthesized with TEA, confirming the better OSDA-directing roles of MTEA cations towards the cha cavity, in good agreement with DFT calculations. Cu-exchanged Al-rich CHA-type samples achieved with MTEA and TEA show excellent catalytic activity and hydrothermal stability for the selective catalytic reduction (SCR) of NOx with ammonia under conditions relevant for future heavy duty diesel conditions.This work has been supported by Umicore and by the Spanish Government-MCIU through RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE) and PID2020-112590GB-C21 (AEI/FEDER, UE). T.W. acknowledges financial support by the Swedish Research Council (Grant No. 2019-05465). E.B. acknowledges the Spanish Government-MCIU for a FPI scholarship (PRE2019-088360). P.F. thanks ITQ for a contract. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. The computations were performed on the Tirant III cluster of the Servei d'Informàtica of the University of Valencia

Swabian MOSES 2021: An interdisciplinary field campaign for investigating convective storms and their event chains

The Neckar Valley and the Swabian Jura in southwest Germany comprise a hotspot for severe convective storms, causing tens of millions of euros in damage each year. Possible reasons for the high frequency of thunderstorms and the associated event chain across compartments were investigated in detail during the hydro-meteorological field campaign Swabian MOSES carried out between May and September 2021. Researchers from various disciplines established more than 25 temporary ground-based stations equipped with state-of-the-art in situ and remote sensing observation systems, such as lidars, dual-polarization X- and C-band Doppler weather radars, radiosondes including stratospheric balloons, an aerosol cloud chamber, masts to measure vertical fluxes, autosamplers for water probes in rivers, and networks of disdrometers, soil moisture, and hail sensors. These fixed-site observations were supplemented by mobile observation systems, such as a research aircraft with scanning Doppler lidar, a cosmic ray neutron sensing rover, and a storm chasing team launching swarmsondes in the vicinity of hailstorms. Seven Intensive Observation Periods (IOPs) were conducted on a total of 21 operating days. An exceptionally high number of convective events, including both unorganized and organized thunderstorms such as multicells or supercells, occurred during the study period. This paper gives an overview of the Swabian MOSES (Modular Observation Solutions for Earth Systems) field campaign, briefly describes the observation strategy, and presents observational highlights for two IOPs

Test beam performance measurements for the Phase I upgrade of the CMS pixel detector

A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is (99.95 ± 0.05) %, while the intrinsic spatial resolutions are (4.80 ± 0.25) μm and (7.99 ± 0.21) μm along the 100 μm and 150 μm pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found.Peer reviewe

Beam test performance of a prototype module with Short Strip ASICs for the CMS HL-LHC tracker upgrade

The Short Strip ASIC (SSA) is one of the four front-end chips designed for the upgrade of the CMS Outer Tracker for the High Luminosity LHC. Together with the Macro-Pixel ASIC (MPA) it will instrument modules containing a strip and a macro-pixel sensor stacked on top of each other. The SSA provides both full readout of the strip hit information when triggered, and, together with the MPA, correlated clusters called stubs from the two sensors for use by the CMS Level-1 (L1) trigger system. Results from the first prototype module consisting of a sensor and two SSA chips are presented. The prototype module has been characterized at the Fermilab Test Beam Facility using a 120 GeV proton beam

Test beam performance of a CBC3-based mini-module for the Phase-2 CMS Outer Tracker before and after neutron irradiation

The Large Hadron Collider (LHC) at CERN will undergo major upgrades to increase the instantaneous luminosity up to 5–7.5×10$^{34}$ cm$^{-2}$s$^{-1}$. This High Luminosity upgrade of the LHC (HL-LHC) will deliver a total of 3000–4000 fb-1 of proton-proton collisions at a center-of-mass energy of 13–14 TeV. To cope with these challenging environmental conditions, the strip tracker of the CMS experiment will be upgraded using modules with two closely-spaced silicon sensors to provide information to include tracking in the Level-1 trigger selection. This paper describes the performance, in a test beam experiment, of the first prototype module based on the final version of the CMS Binary Chip front-end ASIC before and after the module was irradiated with neutrons. Results demonstrate that the prototype module satisfies the requirements, providing efficient tracking information, after being irradiated with a total fluence comparable to the one expected through the lifetime of the experiment

Search for new particles in events with energetic jets and large missing transverse momentum in proton-proton collisions at root s=13 TeV

A search is presented for new particles produced at the LHC in proton-proton collisions at root s = 13 TeV, using events with energetic jets and large missing transverse momentum. The analysis is based on a data sample corresponding to an integrated luminosity of 101 fb(-1), collected in 2017-2018 with the CMS detector. Machine learning techniques are used to define separate categories for events with narrow jets from initial-state radiation and events with large-radius jets consistent with a hadronic decay of a W or Z boson. A statistical combination is made with an earlier search based on a data sample of 36 fb(-1), collected in 2016. No significant excess of events is observed with respect to the standard model background expectation determined from control samples in data. The results are interpreted in terms of limits on the branching fraction of an invisible decay of the Higgs boson, as well as constraints on simplified models of dark matter, on first-generation scalar leptoquarks decaying to quarks and neutrinos, and on models with large extra dimensions. Several of the new limits, specifically for spin-1 dark matter mediators, pseudoscalar mediators, colored mediators, and leptoquarks, are the most restrictive to date.Peer reviewe

Measurement of the top quark forward-backward production asymmetry and the anomalous chromoelectric and chromomagnetic moments in pp collisions at √s = 13 TeV

Abstract The parton-level top quark (t) forward-backward asymmetry and the anomalous chromoelectric (d̂ t) and chromomagnetic (μ̂ t) moments have been measured using LHC pp collisions at a center-of-mass energy of 13 TeV, collected in the CMS detector in a data sample corresponding to an integrated luminosity of 35.9 fb−1. The linearized variable AFB(1) is used to approximate the asymmetry. Candidate t t ¯ events decaying to a muon or electron and jets in final states with low and high Lorentz boosts are selected and reconstructed using a fit of the kinematic distributions of the decay products to those expected for t t ¯ final states. The values found for the parameters are AFB(1)=0.048−0.087+0.095(stat)−0.029+0.020(syst),μ̂t=−0.024−0.009+0.013(stat)−0.011+0.016(syst), and a limit is placed on the magnitude of | d̂ t| < 0.03 at 95% confidence level. [Figure not available: see fulltext.

Measurement of t(t)over-bar normalised multi-differential cross sections in pp collisions at root s=13 TeV, and simultaneous determination of the strong coupling strength, top quark pole mass, and parton distribution functions

Peer reviewe