A high-gain Quantum free-electron laser: emergence & exponential gain

We derive an effective Dicke model in momentum space to describe collective effects in the quantum regime of a free-electron laser (FEL). The resulting exponential gain from a single passage of electrons allows the operation of a Quantum FEL in the high-gain mode and avoids the experimental challenges of an X-ray FEL oscillator. Moreover, we study the intensity fluctuations of the emitted radiation which turn out to be super-Poissonian

Remote Assessment of Cultural Heritage Environments with Wireless Sensor Array Networks

The logistics and cost of environmental monitoring can represent challenges for heritage managers, partly because of the sheer number of environmental parameters to consider. There is a need for a system, capable of monitoring the holistic impact of the environment on cultural materials while remaining relatively easy to use and providing remote access. This paper describes a dosimetric system based on piezoelectric quartz crystal technology. The prototype sensing module consists of an array of piezoelectric quartz crystals (PQC) coated with different metals (Fe, Cu, Ni and Sn) and includes a temperature and relative humidity sensor. The communication module involves an 802.15.4 low-power radio and a GPRS gateway which allows real time visualisation of the measurements online. An energy management protocol ensures that the system consumes very low power between measurements. The paper also describes the results and experiences from two heritage field deployments, at Apsley House in London, UK, and at the Royal Palaces of Abomey in Benin. Evaluation of PQC measurements, temperature, relative humidity and the rate of successful transmission over the communication systems are also reported

The effect of SU-8 patterned surfaces on the response of the quartz crystal microbalance

In this work we present data showing the effect of patterning layers of SU-8 photoresist on a quartz crystal microbalance (QCM) and subsequent chemical treatment to increase their hydrophobicity. Patterns with 5 mu m diameter pillars spaced every 10 mu m have been fabricated with heights of 3, 5 and 10 mu m in addition to equivalent thickness flat layers. Contact angle measurements have been made before and after the hydrophobic chemical treatment. The change in resonant frequency of the QCM has been investigated as the surfaces were submerged in solutions of water/PEG with changing viscosity-density product

The Beam Conditions Monitor of the LHCb Experiment

The LHCb experiment at the European Organization for Nuclear Research (CERN) is dedicated to precision measurements of CP violation and rare decays of B hadrons. Its most sensitive components are protected by means of a Beam Conditions Monitor (BCM), based on polycrystalline CVD diamond sensors. Its configuration, operation and decision logics to issue or remove the beam permit signal for the Large Hadron Collider (LHC) are described in this paper.Comment: Index Terms: Accelerator measurement systems, CVD, Diamond, Radiation detector

ST Quartz Acoustic Wave Sensors with Sectional Guiding Layers

We report the effect of removing a section of guiding layer from the propagation paths of ST-quartz Love wave sensors; this offers the ease of fabrication of a polymer guiding layer whilst retaining the native surface of the quartz which may then be used for the attachment of a sensitizing layer. Data is presented for rigid and viscous loading, which indicates a small reduction in mass sensitivity compared to a Love wave device. Biosensing capabilities of these discontinuous ‘sectional’ guiding layer devices are demonstrated using protein adsorption from solution

On the Observation of Vacuum Birefringence

We suggest an experiment to observe vacuum birefringence induced by intense laser fields. A high-intensity laser pulse is focused to ultra-relativistic intensity and polarizes the vacuum which then acts like a birefringent medium. The latter is probed by a linearly polarized x-ray pulse. We calculate the resulting ellipticity signal within strong-field QED assuming Gaussian beams. The laser technology required for detecting the signal will be available within the next three years.Comment: 4 pages, 4 figure

Pleading Securities Fraud

Hyaluronan based hydrogel coatings can mimic extracellular matrix components and incorporate growth factors that can be released during a progressive degradation while new tissue regenerates. This paper describes a structural characterization of a hydrogel coating made of modified hyaluronan polymers and how these coatings interact with bone morphogenetic protein-2 (BMP-2). Quartz crystal microbalance and neutron reflectivity measurements were used for in-situ, real-time measurements of the adsorption properties of polymers and proteins on smooth titanium oxide surfaces that mimic implant products in orthopedics. The adsorption of BMP-2 on a bare titanium oxide surface is compared to that on titanium oxide coated with different chemically modified hyaluronan, the most important being hyaluronan with bisphosphonate groups (HA-BP). The subsequent release of the BMP-2 from these hydrogel coatings could be triggered by calcium ions. The amount of adsorbed protein on the surfaces as well as the amount of released protein both depend on the type of hyaluronan coating. We conclude that HA-BP coated titanium oxide surfaces provide an excellent material for growth factor delivery in-vivo

SU-8 Guiding Layer for Love Wave Devices

SU-8 is a technologically important photoresist used extensively for the fabrication of microfluidics and MEMS, allowing high aspect ratio structures to be produced. In this work we report the use of SU-8 as a Love wave sensor guiding layer which allows the possibility of integrating a guiding layer with flow cell during fabrication. Devices were fabricated on ST-cut quartz substrates with a single-single finger design such that a surface skimming bulk wave (SSBW) at 97.4 MHz was excited. SU-8 polymer layers were successively built up by spin coating and spectra recorded at each stage; showing a frequency decrease with increasing guiding layer thickness. The insertion loss and frequency dependence as a function of guiding layer thickness was investigated over the first Love wave mode. Mass loading sensitivity of the resultant Love wave devices was investigated by deposition of multiple gold layers. Liquid sensing using these devices was also demonstrated; water-glycerol mixtures were used to demonstrate sensing of density-viscosity and the physical adsorption and removal of protein was also assessed using albumin and fibrinogen as model proteins

Airborne chemical sensing with mobile robots

Airborne chemical sensing with mobile robots has been an active research areasince the beginning of the 1990s. This article presents a review of research work in this field,including gas distribution mapping, trail guidance, and the different subtasks of gas sourcelocalisation. Due to the difficulty of modelling gas distribution in a real world environmentwith currently available simulation techniques, we focus largely on experimental work and donot consider publications that are purely based on simulations

Role of surface roughness in hard x-ray emission from femtosecond laser produced copper plasmas

The hard x-ray emission in the energy range of 30-300 keV from copper plasmas produced by 100 fs, 806 nm laser pulses at intensities in the range of 10$^{15}-10^{16}$ W cm$^{-2}$ is investigated. We demonstrate that surface roughness of the targets overrides the role of polarization state in the coupling of light to the plasma. We further show that surface roughness has a significant role in enhancing the x-ray emission in the above mentioned energy range.Comment: 5 pages, 4 figures, to appear in Phys. Rev.