Synthesis and characterization of novel scaffold for bone tissue engineering based on Whartons´s jelly

A composite is a material made of more than one component, and the bond between the components is on a scale larger than the atomic scale. The objective of the present study was to synthesize and perform the structural characterization and biological evaluation of a new biocomposite (BCO) based on a novel combination of an organic and an inorganic phase, for bone tissue engineering applications. The organic phase consisted of Wharton´s Jelly (WJ), which was obtained from embryonic tissue following a protocol developed by our laboratory. The inorganic phase consisted of bioceramic particles (BC), produced by sintering hydroxyapatite (HA) with β- tricalcium phosphate (β-TCP), and bioactive glass particles (BG). Each phase of the BCO was fully characterized by SEM, EDS, XRD and FTIR. Biocompatibility was evaluated in vivo in the tibiae of Wistar rats (n=40). Histological evaluation was performed at 0, 1, 7, 14, 30 and 60 days. XRD showed the phases corresponding to HA and β-TCP, whereas diffractogram of BG showed it to have an amorphous structure. EDS showed mainly Si and Na, Ca, P in BG, and Ca and P in HA and β-TCP. FTIR identified bonds between the organic and inorganic phases. From a mechanical viewpoint, the composite showed high flexural strength of 40.3±0.8MPa. The synthesized BCO exhibited adequate biocompatibility as shown by formation of lamellar type bone linked by BG and BC particles. The biomaterial presented here showed excellent mechanical and biocompatibility properties for its potential clinical use.Fil: Martinez, Cristian. Universidad de Buenos Aires. Facultad de Ingenieria. Instituto de Ingeniería Biomédica; Argentina. Universidad de Buenos Aires. Facultad de Odontología. Cátedra de Anatomía Patológica; Argentina. Universidad Nacional de Cuyo. Facultad de Odontologia; ArgentinaFil: Fernández, Carlos. Universidad de Buenos Aires. Facultad de Ingenieria. Instituto de Ingeniería Biomédica; ArgentinaFil: Prado, Miguel Oscar. Comisión Nacional de Energía Atómica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Ozols, Andres. Universidad de Buenos Aires. Facultad de Ingenieria. Instituto de Ingeniería Biomédica; ArgentinaFil: Olmedo, Daniel Gustavo. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay; Argentina. Universidad de Buenos Aires. Facultad de Odontología. Cátedra de Anatomía Patológica; Argentin

Syntheses of hydroxyapatite from natural sources

Waste materials from natural sources are important resources for extraction and recovery of valuable compounds. Transformation of these waste materials into valuable materials requires specific techniques and approaches. Hydroxyapatite (HAp) is a biomaterial that can be extracted from natural wastes. HAp has been widely used in biomedical applications owing to its excellent bioactivity, high biocompatibility, and excellent osteoconduction characteristics. Thus, HAp is gaining prominence for applications as orthopaedic implants and dental materials. This review summarizes some of the recent methods for extraction of HAp from natural sources including mammalian, aquatic or marine sources, shell sources, plants and algae, and from mineral sources. The extraction methods used to obtain hydroxyapatite are also described. The effect of extraction process and natural waste source on the critical properties of the HAp such as Ca/P ratio, crystallinity and phase assemblage, particle sizes, and morphology are discussed herein

Strontium and strontium ranelate : Historical review of some of their functions

Publisher Copyright: © 2017 Elsevier B.V.The review covers historical and last decade's scientific literature on the biological and clinical role of strontium (Sr) and strontium ranelate (Sr RAN). It enrols the description of the main effects of Sr on supportive tissue, its proven and possible morphopathogenetical mechanisms and the interaction with the bone, and especially focuses on the Sr ability to inhibit osteoclasts and affect the programmed cell death. The main experimental and clinical experience regarding the Sr RAN influence in the treatment of osteoporosis and the search for correct doses is also highlighted. The review gives insight into the role of Sr/Sr RAN on stem cells, apoptosis, animal and clinical research.publishersversionPeer reviewe

The Study of Magnesium Substitution Effect on Physicochemical Properties of Hydroxyapatite

In the present study, pure and Mg-substitutedhydroxyapatite powders made up of needle-like and plate-likeparticles, respectively, have been synthesized by wet chemicalprecipitation of CaO, MgO and H3PO4. The influence of differentamounts of MgO addition into synthesis media on properties ofas-synthesized and sintered powders has been evaluated.Through the phase and chemical composition analysis it hasbeen determined that the prepared powders contain variousamounts of Mg (in the range between 0.21–4.72 wt%). Thesubstitution of Mg promoted the decomposition ofhydroxyapatite to β-tricalcium phosphate

3D printed Sr-containing composite scaffolds: Effect of structural design and material formulation towards new strategies for bone tissue engineering

The use of composite materials, processed as 3D tissue-like scaffolds, has been widely investigated as a promising strategy for bone tissue engineering applications. Also, additive manufacturing technologies such as fused deposition modelling (FDM) have greatly contributed to the manufacture of patient-specific scaffolds with predefined pore structures and intricate geometries. However, conventional FDM techniques require the use of materials exclusively in the form of filaments, which in order to produce composite scaffolds lead to additional costs for the fabrication of precursor filaments as well as multi-step production methods. In this study, we propose the use of an advantageous extrusion-based printing technology, which provides the opportunity to easily co-print biomaterials, starting from their raw forms, and by using a single-step manufacturing and solvent-free process. Poly(e-caprolactone) (PCL), an FDA approved biodegradable material, was used as polymeric matrix while hydroxyapatite (HA) and strontium substituted HA (SrHA), at various contents were introduced as a bioactive reinforcing phase capable of mimicking the mineral phase of natural bone. Three different architectures for each material formulation were designed, and subsequently the effect of composition variations and structural designs was analysed in terms of physico-chemical, mechanical and biological performance. A correlation between architecture and compressive modulus, regardless the formulation tested, was observed demonstrating how the laydown pattern influences the resulting 3D printed scaffolds’ stiffness. Furthermore, in vitro cell culture by using TERT Human Mesenchymal Stromal Cells (hTERT-MSCs) revealed that Sr-containing composite scaffolds showed greater levels of mineralisation and osteogenic potential in comparison to bare PCL and pure HA