Simulating MADMAX in 3D: Requirements for dielectric axion haloscopes

We present 3D calculations for dielectric haloscopes such as the currently envisioned MADMAX experiment. For ideal systems with perfectly flat, parallel and isotropic dielectric disks of finite diameter, we find that a geometrical form factor reduces the emitted power by up to 30 % compared to earlier 1D calculations. We derive the emitted beam shape, which is important for antenna design. We show that realistic dark matter axion velocities of 10-3 c and inhomogeneities of the external magnetic field at the scale of 10 % have negligible impact on the sensitivity of MADMAX. We investigate design requirements for which the emitted power changes by less than 20 % for a benchmark boost factor with a bandwidth of 50 MHz at 22 GHz, corresponding to an axion mass of 90 µ eV. We find that the maximum allowed disk tilt is 100 µ m divided by the disk diameter, the required disk planarity is 20 µ m (min-to-max) or better, and the maximum allowed surface roughness is 100 µ m (min-to-max). We show how using tiled dielectric disks glued together from multiple smaller patches can affect the beam shape and antenna coupling. © 2021 The Author(s)

Deep sea tests of a prototype of the KM3NeT digital optical module

The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deepwaters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on the first months of data taking and rate measurements. The analysis results highlight the capabilities of the new module design in terms of background suppression and signal recognition. The directionality of the optical module enables the recognition of multiple Cherenkov photons from the same (40)Kdecay and the localisation of bioluminescent activity in the neighbourhood. The single unit can cleanly identify atmospheric muons and provide sensitivity to the muon arrival directions

Letter of intent for KM3NeT 2.0

The main objectives of the KM3NeT Collaboration are ( i ) the discovery and subsequent observation of high-energy neutrino sources in the Universe and ( ii ) the determination of the mass hierarchy of neutrinos. These objectives are strongly motivated by two recent important discoveries, namely: ( 1 ) the high- energy astrophysical neutrino signal reported by IceCube and ( 2 ) the sizable contribution of electron neutrinos to the third neutrino mass eigenstate as reported by Daya Bay, Reno and others. To meet these objectives, the KM3NeT Collaboration plans to build a new Research Infrastructure con- sisting of a network of deep-sea neutrino telescopes in the Mediterranean Sea. A phased and distributed implementation is pursued which maximises the access to regional funds, the availability of human resources and the syner- gistic opportunities for the Earth and sea sciences community. Three suitable deep-sea sites are selected, namely off-shore Toulon ( France ) , Capo Passero ( Sicily, Italy ) and Pylos ( Peloponnese, Greece ) . The infrastructure will consist of three so-called building blocks. A building block comprises 115 strings, each string comprises 18 optical modules and each optical module comprises 31 photo-multiplier tubes. Each building block thus constitutes a three- dimensional array of photo sensors that can be used to detect the Cherenkov light produced by relativistic particles emerging from neutrino interactions. Two building blocks will be sparsely con fi gured to fully explore the IceCube signal with similar instrumented volume, different methodology, improved resolution and complementary fi eld of view, including the galactic plane. One building block will be densely con fi gured to precisely measure atmospheric neutrino oscillations. Original content from this work may be used under the ter

Detection potential of the KM3NeT detector for high-energy neutrinos from the Fermi bubbles

A recent analysis of the Fermi Large Area Telescope data provided evidence for a high-intensity emission of high-energy gamma rays with a E 2 spectrum from two large areas, spanning 50 above and below the Galactic centre (the ‘‘Fermi bubbles’’). A hadronic mechanism was proposed for this gamma-ray emission making the Fermi bubbles promising source candidates of high-energy neutrino emission. In this work Monte Carlo simulations regarding the detectability of high-energy neutrinos from the Fermi bubbles with the future multi-km3 neutrino telescope KM3NeT in the Mediterranean Sea are presented. Under the hypothesis that the gamma-ray emission is completely due to hadronic processes, the results indicate that neutrinos from the bubbles could be discovered in about one year of operation, for a neutrino spectrum with a cutoff at 100 TeV and a detector with about 6 km3 of instrumented volume. The effect of a possible lower cutoff is also considered.Published7–141.8. Osservazioni di geofisica ambientaleJCR Journalrestricte

Expansion cone for the 3-inch PMTs of the KM3NeT optical modules

[EN] Detection of high-energy neutrinos from distant astrophysical sources will open a new window on the Universe. The detection principle exploits the measurement of Cherenkov light emitted by charged particles resulting from neutrino interactions in the matter containing the telescope. A novel multi-PMT digital optical module (DOM) was developed to contain 31 3-inch photomultiplier tubes (PMTs). In order to maximize the detector sensitivity, each PMT will be surrounded by an expansion cone which collects photons that would otherwise miss the photocathode. Results for various angles of incidence with respect to the PMT surface indicate an increase in collection efficiency by 30% on average for angles up to 45 degrees with respect to the perpendicular. Ray-tracing calculations could reproduce the measurements, allowing to estimate an increase in the overall photocathode sensitivity, integrated over all angles of incidence, by 27% (for a single PMT). Prototype DOMs, being built by the KM3NeT consortium, will be equipped with these expansion cones.This work is supported through the EU, FP6 Contract no. 011937, FP7 grant agreement no. 212252, and the Dutch Ministry of Education, Culture and Science.Adrián Martínez, S.; Ageron, M.; Aguilar, JA.; Aharonian, F.; Aiello, S.; Albert, A.; Alexandri, M.... (2013). Expansion cone for the 3-inch PMTs of the KM3NeT optical modules. Journal of Instrumentation. 8(3):1-19. https://doi.org/10.1088/1748-0221/8/03/T03006S1198

ANTARES: the first undersea neutrino telescope

The ANTARES Neutrino Telescope was completed in May 2008 and is the first operational Neutrino Telescope in the Mediterranean Sea. The main purpose of the detector is to perform neutrino astronomy and the apparatus also offers facilities for marine and Earth sciences. This paper describes the design, the construction and the installation of the telescope in the deep sea, offshore from Toulon in France. An illustration of the detector performance is given

A New Technique for the Deep-Sea Mating of Inexpensive Connectors

International audienceDeep-sea electric and optical connections can often be problematic. Several manufacturers propose wet-mateable connectors based on integrated valve systems but the complexity and precision needed to reach the required reliability result in high cost. We are therefore developing a new type of tooling for connecting cheap standard wet-mateable connectors under oil in deep sea water pressure conditions. Complexity is delocalised from the connector to the easily recoverable and reparable tooling. The cost of wet connections is consequently expected to be drastically reduced, with reliability enhanced. The tooling contains 2 carriers sliding on a linear stage together with a second perpendicular stage intersecting the line between the carriers. The carriers and linear stages are enclosed in a clam-shelled oil-fillable volume. Each half of the connector to be mated is fixed to its respective carrier in a ROV operation. The waterproof caps of the two connectors automatically attach to the third carrier on the perpendicular stage. Seawater around the connectors is replaced with non-conductive oil, and both halves of the connector are detached from their sealing caps, which are then moved sideways to allow the connector to be mated under oil. The clamshells are then opened, allowing the mated connector to be removed by the ROV. A reverse capping procedure is applied for disconnection

Hydrolienne a structure porteuse flexible

Classification internationale : F03B13/10 ; F03B13/22 ; F03B13/2