200 research outputs found
A cohesive zone framework for environmentally assisted fatigue
We present a compelling finite element framework to model hydrogen assisted
fatigue by means of a hydrogen- and cycle-dependent cohesive zone formulation.
The model builds upon: (i) appropriate environmental boundary conditions, (ii)
a coupled mechanical and hydrogen diffusion response, driven by chemical
potential gradients, (iii) a mechanical behavior characterized by finite
deformation J2 plasticity, (iv) a phenomenological trapping model, (v) an
irreversible cohesive zone formulation for fatigue, grounded on continuum
damage mechanics, and (vi) a traction-separation law dependent on hydrogen
coverage calculated from first principles. The computations show that the
present scheme appropriately captures the main experimental trends; namely, the
sensitivity of fatigue crack growth rates to the loading frequency and the
environment. The role of yield strength, work hardening, and constraint
conditions in enhancing crack growth rates as a function of the frequency is
thoroughly investigated. The results reveal the need to incorporate additional
sources of stress elevation, such as gradient-enhanced dislocation hardening,
to attain a quantitative agreement with the experiments
Strain gradient plasticity modeling of hydrogen diffusion to the crack tip
© 2016 Hydrogen Energy Publications LLC. In this work hydrogen diffusion towards the fracture process zone is examined accounting for local hardening due to geometrically necessary dislocations (GNDs) by means of strain gradient plasticity (SGP). Finite element computations are performed within the finite deformation theory to characterize the gradient-enhanced stress elevation and subsequent diffusion of hydrogen towards the crack tip. Results reveal that GNDs, absent in conventional plasticity predictions, play a fundamental role on hydrogen transport ahead of a crack. SGP estimations provide a good agreement with experimental measurements of crack tip deformation and high levels of lattice hydrogen concentration are predicted within microns to the crack tip. The important implications of the results in the understanding of hydrogen embrittlement mechanisms are thoroughly discussed
Testing Beam-Induced Quench Levels of LHC Superconducting Magnets
In the years 2009-2013 the Large Hadron Collider (LHC) has been operated with
the top beam energies of 3.5 TeV and 4 TeV per proton (from 2012) instead of
the nominal 7 TeV. The currents in the superconducting magnets were reduced
accordingly. To date only seventeen beam-induced quenches have occurred; eight
of them during specially designed quench tests, the others during injection.
There has not been a single beam- induced quench during normal collider
operation with stored beam. The conditions, however, are expected to become
much more challenging after the long LHC shutdown. The magnets will be
operating at near nominal currents, and in the presence of high energy and high
intensity beams with a stored energy of up to 362 MJ per beam. In this paper we
summarize our efforts to understand the quench levels of LHC superconducting
magnets. We describe beam-loss events and dedicated experiments with beam, as
well as the simulation methods used to reproduce the observable signals. The
simulated energy deposition in the coils is compared to the quench levels
predicted by electro-thermal models, thus allowing to validate and improve the
models which are used to set beam-dump thresholds on beam-loss monitors for Run
2.Comment: 19 page
A novel observation of pubic osteomyelitis due to Streptococcus viridans after dental extraction: a case report
<p>Abstract</p> <p>Introduction</p> <p>Pubic osteomyelitis should be suspected in athletic individuals with sudden groin pain, painful restriction of hip movements and fever. It is an infrequent and confusing disorder, which is often heralded by atypical gait disturbance and diffuse pain in the pelvic girdle. The most common pathogen is <it>Staphylococcus aureus </it>but, on occasions, efforts to identify infectious agents sometimes prove negative. Pubic osteomyelitis due to <it>Streptococcus viridans </it>has not been reported previously in the literature.</p> <p>Case presentation</p> <p>We describe the case of a fit 24-year-old athlete, who had a wisdom tooth extracted 2 weeks prior to the presentation, which could have served as a port of entry and predisposed the patient to transient bacteraemia.</p> <p>Conclusion</p> <p><it>S. viridans </it>is well known for causing infective endocarditis of native damaged heart valves, but to the best of the authors' knowledge it has not been reported previously as a cause of pubic osteomyelitis. We believe that this case should alert physicians to the association between dental procedures and osteomyelitis of the pubis secondary to <it>S. viridans</it>.</p
A First Search for coincident Gravitational Waves and High Energy Neutrinos using LIGO, Virgo and ANTARES data from 2007
We present the results of the first search for gravitational wave bursts
associated with high energy neutrinos. Together, these messengers could reveal
new, hidden sources that are not observed by conventional photon astronomy,
particularly at high energy. Our search uses neutrinos detected by the
underwater neutrino telescope ANTARES in its 5 line configuration during the
period January - September 2007, which coincided with the fifth and first
science runs of LIGO and Virgo, respectively. The LIGO-Virgo data were analysed
for candidate gravitational-wave signals coincident in time and direction with
the neutrino events. No significant coincident events were observed. We place
limits on the density of joint high energy neutrino - gravitational wave
emission events in the local universe, and compare them with densities of
merger and core-collapse events.Comment: 19 pages, 8 figures, science summary page at
http://www.ligo.org/science/Publication-S5LV_ANTARES/index.php. Public access
area to figures, tables at
https://dcc.ligo.org/cgi-bin/DocDB/ShowDocument?docid=p120000
Construction, assembly and tests of the ATLAS electromagnetic end-cap calorimeters
The construction and the assembly of the two end-caps of the ATLAS liquid argon electromagnetic calorimeter as well as their test and qualification programs are described. The work described here started at the beginning of 2001 and lasted for approximately three years. The results of the qualification tests performed before installation in the LHC ATLAS pit are given. The detectors are now installed in the ATLAS cavern, full of liquid argon and being commissioned. The complete detectors coverage is powered with high voltage and readout
The Power Board of the KM3NeT Digital Optical Module: design, upgrade, and production
The KM3NeT Collaboration is building an underwater neutrino observatory at
the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both
composed of a three-dimensional array of light detectors, known as digital
optical modules. Each digital optical module contains a set of 31 three inch
photomultiplier tubes distributed over the surface of a 0.44 m diameter
pressure-resistant glass sphere. The module includes also calibration
instruments and electronics for power, readout and data acquisition. The power
board was developed to supply power to all the elements of the digital optical
module. The design of the power board began in 2013, and several prototypes
were produced and tested. After an exhaustive validation process in various
laboratories within the KM3NeT Collaboration, a mass production batch began,
resulting in the construction of over 1200 power boards so far. These boards
were integrated in the digital optical modules that have already been produced
and deployed, 828 until October 2023. In 2017, an upgrade of the power board,
to increase reliability and efficiency, was initiated. After the validation of
a pre-production series, a production batch of 800 upgraded boards is currently
underway. This paper describes the design, architecture, upgrade, validation,
and production of the power board, including the reliability studies and tests
conducted to ensure the safe operation at the bottom of the Mediterranean Sea
throughout the observatory's lifespa
Probing invisible neutrino decay with KM3NeT-ORCA
In the era of precision measurements of the neutrino oscillation parameters,
upcoming neutrino experiments will also be sensitive to physics beyond the
Standard Model. KM3NeT/ORCA is a neutrino detector optimised for measuring
atmospheric neutrinos from a few GeV to around 100 GeV. In this paper, the
sensitivity of the KM3NeT/ORCA detector to neutrino decay has been explored. A
three-flavour neutrino oscillation scenario, where the third neutrino mass
state decays into an invisible state, e.g. a sterile neutrino, is
considered. We find that KM3NeT/ORCA would be sensitive to invisible neutrino
decays with ~ at confidence
level, assuming true normal ordering. Finally, the impact of neutrino decay on
the precision of KM3NeT/ORCA measurements for ,
and mass ordering have been studied. No significant effect of neutrino decay on
the sensitivity to these measurements has been found.Comment: 27 pages, 14 figures, bibliography updated, typos correcte
Embedded Software of the KM3NeT Central Logic Board
The KM3NeT Collaboration is building and operating two deep sea neutrino
telescopes at the bottom of the Mediterranean Sea. The telescopes consist of
latices of photomultiplier tubes housed in pressure-resistant glass spheres,
called digital optical modules and arranged in vertical detection units. The
two main scientific goals are the determination of the neutrino mass ordering
and the discovery and observation of high-energy neutrino sources in the
Universe. Neutrinos are detected via the Cherenkov light, which is induced by
charged particles originated in neutrino interactions. The photomultiplier
tubes convert the Cherenkov light into electrical signals that are acquired and
timestamped by the acquisition electronics. Each optical module houses the
acquisition electronics for collecting and timestamping the photomultiplier
signals with one nanosecond accuracy. Once finished, the two telescopes will
have installed more than six thousand optical acquisition nodes, completing one
of the more complex networks in the world in terms of operation and
synchronization. The embedded software running in the acquisition nodes has
been designed to provide a framework that will operate with different hardware
versions and functionalities. The hardware will not be accessible once in
operation, which complicates the embedded software architecture. The embedded
software provides a set of tools to facilitate remote manageability of the
deployed hardware, including safe reconfiguration of the firmware. This paper
presents the architecture and the techniques, methods and implementation of the
embedded software running in the acquisition nodes of the KM3NeT neutrino
telescopes
Prospects for combined analyses of hadronic emission from -ray sources in the Milky Way with CTA and KM3NeT
The Cherenkov Telescope Array and the KM3NeT neutrino telescopes are major
upcoming facilities in the fields of -ray and neutrino astronomy,
respectively. Possible simultaneous production of rays and neutrinos
in astrophysical accelerators of cosmic-ray nuclei motivates a combination of
their data. We assess the potential of a combined analysis of CTA and KM3NeT
data to determine the contribution of hadronic emission processes in known
Galactic -ray emitters, comparing this result to the cases of two
separate analyses. In doing so, we demonstrate the capability of Gammapy, an
open-source software package for the analysis of -ray data, to also
process data from neutrino telescopes. For a selection of prototypical
-ray sources within our Galaxy, we obtain models for primary proton and
electron spectra in the hadronic and leptonic emission scenario, respectively,
by fitting published -ray spectra. Using these models and instrument
response functions for both detectors, we employ the Gammapy package to
generate pseudo data sets, where we assume 200 hours of CTA observations and 10
years of KM3NeT detector operation. We then apply a three-dimensional binned
likelihood analysis to these data sets, separately for each instrument and
jointly for both. We find that the largest benefit of the combined analysis
lies in the possibility of a consistent modelling of the -ray and
neutrino emission. Assuming a purely leptonic scenario as input, we obtain, for
the most favourable source, an average expected 68% credible interval that
constrains the contribution of hadronic processes to the observed -ray
emission to below 15%.Comment: 18 pages, 15 figures. Submitted to journa
- âŠ