163 research outputs found

    The optical counterpart of the bright X-ray transient Swift J1745-26

    Get PDF
    We present a 30-day monitoring campaign of the optical counterpart of the bright X-ray transient Swift J1745-26, starting only 19 minutes after the discovery of the source. We observe the system peaking at i' ~17.6 on day 6 (MJD 56192) to then decay at a rate of ~0.04 mag/day. We show that the optical peak occurs at least 3 days later than the hard X-ray (15-50 keV) flux peak. Our measurements result in an outburst amplitude greater than 4.3 magnitudes, which favours an orbital period < 21 h and a companion star with a spectral type later than ~ A0. Spectroscopic observations taken with the GTC-10.4 m telescope reveal a broad (FWHM ~ 1100 km/s), double-peaked H_alpha emission line from which we constrain the radial velocity semi-amplitude of the donor to be K_2 > 250 km/s. The breadth of the line and the observed optical and X-ray fluxes suggest that Swift J1745-26 is a new black hole candidate located closer than ~7 kpc.Comment: 5 pages, 4 figures, accepted for publication in MNRA

    Mid-infrared Suspended Waveguide Platform and Building Blocks

    Get PDF
    In this work we present our recent progress in the development of a platform for the mid-infrared wavelength range, based on suspended silicon waveguide with subwavelength metamaterial cladding. The platform has some intrinsic advantages, which make it a very promising candidate for sensing applications in the fingerprint region. Specifically, it can cover the full transparency window of silicon (up to a wavelength of 8 μm), only requires one lithographic etch-step and can be designed for strong light-matter interaction. Design rules, practical aspects of the fabrication process and experimental results of a complete set of elemental building blocks operating at two very different wavelengths, 3.8 μm and 7.67 μm, will be discussed. Propagation losses as low as 0.82 dB/cm at λo=3.8 μm and 3.1 dB/cm at λo=7.67 μm are attained, for the interconnecting waveguides.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

    Spectrophotometric analysis of GRB afterglow extinction curves with X-shooter

    Get PDF
    In this work we use gamma-ray burst (GRB) afterglow spectra observed with the VLT/X-shooter spectrograph to measure rest-frame extinction in GRB lines-of-sight by modeling the broadband near-infrared (NIR) to X-ray afterglow spectral energy distributions (SEDs). Our sample consists of nine Swift GRBs, eight of them belonging to the long-duration and one to the short-duration class. Dust is modeled using the average extinction curves of the Milky Way and the two Magellanic Clouds. We derive the rest-frame extinction of the entire sample, which fall in the range 0AV1.20 \lesssim {\it A}_{\rm V} \lesssim 1.2. Moreover, the SMC extinction curve is the preferred extinction curve template for the majority of our sample, a result which is in agreement with those commonly observed in GRB lines-of-sights. In one analysed case (GRB 120119A), the common extinction curve templates fail to reproduce the observed extinction. To illustrate the advantage of using the high-quality X-shooter afterglow SEDs over the photometric SEDs, we repeat the modeling using the broadband SEDs with the NIR-to-UV photometric measurements instead of the spectra. The main result is that the spectroscopic data, thanks to a combination of excellent resolution and coverage of the blue part of the SED, are more successful in constraining the extinction curves and therefore the dust properties in GRB hosts with respect to photometric measurements. In all cases but one the extinction curve of one template is preferred over the others. We show that the modeled values of the extinction and the spectral slope, obtained through spectroscopic and photometric SED analysis, can differ significantly for individual events. Finally we stress that, regardless of the resolution of the optical-to-NIR data, the SED modeling gives reliable results only when the fit is performed on a SED covering a broader spectral region.Comment: 17 pages, 7 figures, 4 tables, accepted for publication in Astronomy & Astrophysic

    Broadband fiber-chip zero-order surface grating coupler with 0.4 dB efficiency.

    Get PDF
    Política de acceso abierto tomada de: https://v2.sherpa.ac.uk/id/publication/13362Surface grating couplers enable efficient coupling of light between optical fibers and nanophotonic waveguides. However, in conventional grating couplers, the radiation angle is intrinsically wavelength dependent, thereby limiting their operation bandwidth. In this Letter, we present a zero-order surface grating coupler in silicon-on-insulator which overcomes this limitation by operating in the subwavelength regime. By engineering the effective refractive index of the grating region, both high coupling efficiency and broadband operation bandwidth are achieved. The grating is assisted by a silicon prism on top of the waveguide, which favors upward radiation and minimizes power losses to substrate. Using a linear apodization, our design achieves a coupling efficiency of 91% (−0.41 dB) and a 1-dB bandwidth of 126 nm

    A decade of GRB follow-up by BOOTES in Spain (2003-2013)

    Get PDF
    This article covers ten years of GRB follow-ups by the Spanish BOOTES stations: 71 follow-ups providing 23 detections. Follow-ups by BOOTES-1B from 2005 to 2008 were given in the previous article, and are here reviewed, updated, and include additional detection data points as the former article merely stated their existence. The all-sky cameras CASSANDRA have not yet detected any GRB optical afterglows, but limits are reported where available

    Pre-ALMA observations of GRBs in the mm/submm range

    Full text link
    GRBs generate an afterglow emission that can be detected from radio to X-rays during days, or even weeks after the initial explosion. The peak of this emission crosses the mm/submm range during the first hours to days, making their study in this range crucial for constraining the models. Observations have been limited until now due to the low sensitivity of the observatories in this range. We present observations of 10 GRB afterglows obtained from APEX and SMA, as well as the first detection of a GRB with ALMA, and put them into context with all the observations that have been published until now in the spectral range that will be covered by ALMA. The catalogue of mm/submm observations collected here is the largest to date and is composed of 102 GRBs, of which 88 had afterglow observations, whereas the rest are host galaxy searches. With our programmes, we contributed with data of 11 GRBs and the discovery of 2 submm counterparts. In total, the full sample, including data from the literature, has 22 afterglow detections with redshift ranging from 0.168 to 8.2. GRBs have been detected in mm/submm wavelengths with peak luminosities spanning 2.5 orders of magnitude, the most luminous reaching 10^33erg s^-1 Hz^-1. We observe a correlation between the X-ray brightness at 0.5 days and the mm/submm peak brightness. Finally we give a rough estimate of the distribution of peak flux densities of GRB afterglows, based on the current mm/submm sample. Observations in the mm/submm bands have been shown to be crucial for our understanding of the physics of GRBs, but have until now been limited by the sensitivity of the observatories. With the start of the operations at ALMA, the sensitivity will be increased by more than an order of magnitude. Our estimates predict that, once completed, ALMA will detect up to 98% of the afterglows if observed during the passage of the peak synchrotron emission.Comment: 23 pages, 14 figures, 5 tables (one big one!), Accepted for publication in A&A. Includes the first observation of a GRB afterglow with ALM

    Subwavelength Index Engineering for SOI Waveguides

    Get PDF
    Photonic structures with a sub-wavelength pitch, small enough to suppress diffraction, can behave as equivalent homogenous materials that can be engineered to exhibit a specific refractive index and dispersion. Here we discuss the design of a variety of integrated photonic devices, ranging from grating couplers to multimode interference couplers, for which the use of sub-wavelength structures enables unique characteristics. We will place special emphasis on the design and experimental demonstration of multi-mode interference couplers with an unprecedented bandwidth beyond 200nm at telecom wavelengths.Universidad de Málaga.Campus de Excelencia Internacional Andalucía Tech. Ministerio de Economía y Competitividad, "Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad (cofinanciado FEDER)", Proyecto TEC2013-46917-C2-1-

    Comprehensive multi-wavelength modelling of the afterglow of GRB050525A

    Full text link
    The Swift era has posed a challenge to the standard blast-wave model of Gamma Ray Burst (GRB) afterglows. The key observational features expected within the model are rarely observed, such as the achromatic steepening (`jet-break') of the light curves. The observed afterglow light curves showcase additional complex features requiring modifications within the standard model. Here we present optical/NIR observations, millimeter upper limits and comprehensive broadband modelling of the afterglow of the bright GRB 0505025A, detected by Swift. This afterglow cannot be explained by the simplistic form of the standard blast-wave model. We attempt modelling the multi-wavelength light curves using (i) a forward-reverse shock model, (ii) a two-component outflow model and (iii) blast-wave model with a wind termination shock. The forward-reverse shock model cannot explain the evolution of the afterglow. The two component model is able to explain the average behaviour of the afterglow very well but cannot reproduce the fluctuations in the early X-ray light curve. The wind termination shock model reproduces the early light curves well but deviates from the global behaviour of the late-time afterglow.Comment: 20 pages, 6 figures, accepted for publication in MNRA

    Identifying the Location in the Host Galaxy of the Short GRB 111117A with the Chandra Sub-arcsecond Position

    Full text link
    We present our successful Chandra program designed to identify, with sub-arcsecond accuracy, the X-ray afterglow of the short GRB 111117A, which was discovered by Swift and Fermi. Thanks to our rapid target of opportunity request, Chandra clearly detected the X-ray afterglow, though no optical afterglow was found in deep optical observations. The host galaxy was clearly detected in the optical and near-infrared band, with the best photometric redshift of z=1.31_{-0.23}^{+0.46} (90% confidence), making it one of the highest known short GRB redshifts. Furthermore, we see an offset of 1.0 +- 0.2 arcseconds, which corresponds to 8.4 +- 1.7 kpc, between the host and the afterglow position. We discuss the importance of using Chandra for obtaining sub-arcsecond X-ray localizations of short GRB afterglows to study GRB environments.Comment: 17 pages, 11 figures, accepted for publication in Ap

    The distribution of equivalent widths in long GRB afterglow spectra

    Full text link
    The extreme brightness of gamma-ray burst (GRB) afterglows and their simple spectral shape make them ideal beacons to study the interstellar medium of their host galaxies through absorption line spectroscopy. Using 69 low-resolution GRB afterglow spectra, we conduct a study of the rest-frame equivalent width (EW) distribution of features with an average rest-frame EW larger than 0.5 A. To compare an individual GRB with the sample, we develop EW diagrams as a graphical tool, and we give a catalogue with diagrams for the 69 spectra. We introduce a line strength parameter (LSP) that allows us to quantify the strength of the absorption features as compared to the sample by a single number. Using the distributions of EWs of single-species features, we derive the distribution of column densities by a curve of growth (CoG) fit. We find correlations between the LSP and the extinction of the GRB, the UV brightness of the host galaxies and the neutral hydrogen column density. However, we see no significant evolution of the LSP with the redshift. There is a weak correlation between the ionisation of the absorbers and the energy of the GRB, indicating that, either the GRB event is responsible for part of the ionisation, or that galaxies with high-ionisation media produce more energetic GRBs. Spectral features in GRB spectra are, on average, 2.5 times stronger than those seen in QSO intervening damped Lyman-alpha (DLA) systems and slightly more ionised. In particular we find larger excess in the EW of CIV1549 relative to QSO DLAs, which could be related to an excess of Wolf-Rayet stars in the environments of GRBs. From the CoG fitting we obtain an average number of components in the absorption features of GRBs of 6.00(-1.25,+1.00). The most extreme ionisation ratios in our sample are found for GRBs with low neutral hydrogen column density, which could be related to ionisation by the GRB emission.Comment: 37 pages, 31 figures, 15 tables. Accepted for publication in Astonomy and Astrophysic
    corecore