Computational Thermoelectricity Applied to Cooling Devices

This chapter presents a numerical formulation within the finite element method in order to computationally simulate thermoelectric devices. For this purpose, a theoretical formulation based on nonequilibrium thermodynamics with historical notes is previously outlined. Then, a brief description of the finite element is reported to express the thermodynamics governing equations in an amenable form to be numerically discretized. Finally, several applications of cooling thermoelectrics are performed to highlight the benefits of the finite element method. In particular, a commercial thermoelectric device is simulated and several variables such as extracted heat, voltage drop, and temperature distributions inside the thermoelements are represented for different operating conditions. In conclusion, the present numerical tool could be used as a virtual laboratory for the design and optimization of Peltier cells

Recovery of cellulose from polyester/cotton fabrics making use of ionic liquids

This article refers to the chemical recovery of cellulose from fabrics composed of Cotton (CO)/Polyester (PES) achieved using Ionic Liquids (ILs). Initially, the effect of ionic liquids on the surface of the textile is analyzed, determining the influencing factors related to the entry of IL inside the textile and the chemical mechanism that controls the system. This work considers the influence of the time, ratio, and temperature variables on the system, with the aim of defining which of them has a greater influence on the process. The ability of ionic liquids, specifically 1-Allyl-3-Methylimidazolium Chloride (AmimCl), to dissolve cellulose and subsequently regenerate the material through a simulation of the wet spinning process is evaluated. The responsible for the fiber’s inflation, water or DMSO, has also been another factor of study, analyzing the influence of each solvent and the interactions when in contact with the ionic liquid. Finally, the regenerated substance is characterized by its surface structure using the Scanning Electron Microscope (SEM), its molecular structure by Infrared Spectroscopy Analysis (FTIR), and its thermal stability by Thermogravimetric Analysis (TGA)Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i InfraestructuraPostprint (published version

RETROFIT OF EXISTING RAILWAY BRIDGES OF SHOR TO MEDIUM SPANS FOR HIGH-SPEED TRAFFIC USING VISCOELASTIC DAMPERS

Elsevier Moliner Cabedo, E.; Museros Romero, P.; Martínez Rodrigo, MDLD. (2012). Retrofit of existing railway bridges of short to medium spans for high-speed traffic using viscoelastic dampers. Engineering Structures. 40:519-528. doi:10.1016Structures. 40:519-528. doi:10. /j.engstruct.2012 Abstract. This paper presents a study on the energy-absorbing capacities of viscoelastic dampers (VEDs) for reducing the resonant vibrations of simply supported high-speed railway bridges of short to medium span. The proposed solution is based on retrofitting the bridge with a set of discrete VEDs connected to the slab and to an auxiliary structure, placed underneath the bridge deck and resting on the abutments. In this investigation attention is focused on mitigating flexural vibrations; therefore, both the bridge and the auxiliary structure are modelled as simply supported beams with Bernoulli−Euler (B-E) behavior, whereas a discrete fractional derivative model simulates the behavior of the damping material. Firstly, a parametric study of this planar model is carried out, which has led to a dimensioning procedure of the dissipative system. The technical feasibility of this particular retrofit design is numerically evaluated by applying it to a numerical model of a simply supported railway bridge with inadmissible vertical accelerations. Numerical results show that the dynamic response of the structure can be significantly reduced in resonance with the proposed damping system.

Effect of the end cross beams on the railway induced vibrations of short girder bridges

This work is devoted to the analysis of the railway-induced vertical vibrations of simplysupported double track bridges composed by pre-stressed concrete girder decks. Despite the low torsional stiffness that this particular deck configuration exhibits, several structures of this type do exist in both conventional and high-speed railway lines in Spain. Even though railway administrators recommend the construction of transverse or end beams bracing the longitudinal girders at the supports in girder bridges, in several occasions these elements are not built in order to accelerate the construction process. The aim of this study is to evaluate the beneficial effect of installing these transverse beams on the vertical dynamic response of the aforementioned structures and to determine what particular bridges are most affected by the presence of these elements. To this end, a representative ensemble of girder bridges covering a range of span lengths L between 10 m and 25 m has been predimensioned and their dynamic behaviour has been predicted by a finite element model that adopts common assumptions in engineering practice. Conclusions show that installing these elements is particularly relevant in the case of short (10-12.5 m) oblique bridges with a low number of longitudinal girders for a particular deck bending stiffness, leading to an important increase of the first torsion and first transverse bending natural frequencies and to a reduction of the structural response. Finally, experimental measurements on a real bridge belonging to the Madrid-Sevilla high-speed line are included in the final section to illustrate the theoretical derivations

Ballast shear effects on the dynamic response of railway bridges

Single-track railway bridges are susceptible of experiencing high levels of vertical acceleration on the deck that may be dangerously accentuated at resonance. This is especially critical for short-to-medium span simply supported bridges. This problem can compromise the safety of the trains and increase the maintenance costs of the track. The main objective of this work is to investigate the influence of the ballasted track on the dynamic behaviour of these structures. The present contribution provides a detailed sensitivity analysis over a wide single-track bridge catalogue covering span lengths from 10 to 25 m and considering two common deck structural typologies: girder-deck and slab-deck bridges. The effect of the vertical stiffness of the neoprene bearings is also evaluated. A 2D Finite-Element track–bridge interaction model is implemented and used to analyse the effect of the track on the modal parameters, harmonic response and vertical acceleration of the bridges under train passages. Additionally, the weak coupling exerted by the track is studied for structures with an increasing number of consecutive spans. The results obtained reveal a notable influence of the mobilised ballast shear transfer mechanism on the dynamic response of the structures, especially for the shortest girder bridges. Finally, a track–bridge interaction model of an existing short girder bridge from a conventional railway line is updated and used to predict the experimental response measured under operating conditions. The adequacy of the numerical tool and influence of the ballast shear parameters on the dynamic response are shown

Maximum resonance and cancellation phenomena in orthotropic plates traversed by moving loads: Application to railway bridges

The vibrational response of railway bridges is an issue of main concern, especially since the advent of High-Speed traffic. In the case of short-to-medium lengths and simply-supported spans excessive transverse acceleration levels may be induced at the platform, with detrimental consequences for passengers and infrastructures. The orthotropic plate has proven to be an appropriate model for the prediction of the response of certain typologies in the aforementioned cases such as multiple girder decks, solid or voided slabs or filler-beam multiple-track decks. In this contribution, the vibrational response of orthotropic plates, simply and elastically supported, circulated by vertical moving loads is investigated. First, maximum free vibration and cancellation conditions are derived analytically. From these, bridge span length-characteristic distance ratios leading to maximum and minimum resonances under series of equidistant loads are depicted. Second, the applicability of these ratios in oblique decks is analysed for the most common first three mode shapes: first longitudinal bending, first torsion and first transverse bending modes, and the errors in relation to the straight reference case are bounded. To this end, an extensive bridge catalogue of girder bridges is designed in the range of lengths of interest, covering flexural stiffnesses typical from both conventional and High-Speed railway lines. Finally, the applicability of the previous theoretical results is exemplified with experimental measurements performed on a bridge from the Spanish railway network.Spanish Ministries of Economy and Competitiveness (Ministerio de Economía y Competitividad, España) BIA2016-75042-C2Spanish Ministries of Education (Ministerio de Educación, España) CAS18/00080Generalitat Valenciana (España) AICO/2019/17

3D analysis of railway induced vibrations on skew girder bridges including ballast track-bridge interaction effects

This work is devoted to the analysis of the vibratory response of High-Speed (HS) multi-track railway bridges composed by simply-supported spans. In particular, it aims to investigate the influence of three geometrical aspects usually disregarded in numerical models used to evaluate the Serviceability Limit State of traffic safety in such structures: (i) the deck obliquity, (ii) the presence and correct execution of transverse diaphragms at the supports, and (iii) the number of successive simply-supported spans weakly coupled through the ballast track layer. The influence of these aspects is analysed from the correlation of a detailed numerical model and experimental measurements on an in-service High Speed (HS) multi-track railway bridge. From the reference model, a set of variants accounting for different levels of deck obliquity and diaphragm configurations are envisaged and the maximum transverse acceleration over the platform is determined under railway excitation. The analysis is extended to bridges with an increasing number of successive spans. Special attention is paid to the particular location of the maximum response and to the participation of modes different from the longitudinal bending one. Finally, a numerical–experimental comparison of the bridge response under two train passages is presented for the straight and oblique models, and the response adjustment along with the actual bridge performance are assessed

Investigation of the dynamic response and effect of soil properties of Arroyo Bracea II bridge in Madrid-Sevilla High-Speed railway line through experimental analyses

Faculty of Civil and Industrial Engineering of Sapienza University of Rome Italy, from Sunday 10 to Wednesday 13 September 2017In this contribution the authors include results and conclusions from an experimental and numerical analysis of a railway bridge belonging to the Madrid-Sevilla High-Speed railway line in Spain. This structure is monitored due to its short length and typology, which make it susceptible to experience high transverse vibration levels. During the in-situ tests the soil properties at the site were obtained. Also, the response of the structure under the circulation of railway convoys was measured at several points of the deck and at the abutments. From the experimental measurements the modal parameters of the bridge are identified. Finally the experimental results are compared to those provided by a finite element numerical model in the time and frequency domains. Conclusions are extracted regarding the structure performance and the adequacy of the numerical model implemented.Ministerio de Economía y Competitividad BIA2013-43085-PUniversitat Jaume I P1-1B2015-54Ministerio de Economía y Competitividad BIA2016-75042-C

Mortality and pulmonary complications in patients undergoing surgery with perioperative SARS-CoV-2 infection: an international cohort study

Background: The impact of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) on postoperative recovery needs to be understood to inform clinical decision making during and after the COVID-19 pandemic. This study reports 30-day mortality and pulmonary complication rates in patients with perioperative SARS-CoV-2 infection. Methods: This international, multicentre, cohort study at 235 hospitals in 24 countries included all patients undergoing surgery who had SARS-CoV-2 infection confirmed within 7 days before or 30 days after surgery. The primary outcome measure was 30-day postoperative mortality and was assessed in all enrolled patients. The main secondary outcome measure was pulmonary complications, defined as pneumonia, acute respiratory distress syndrome, or unexpected postoperative ventilation. Findings: This analysis includes 1128 patients who had surgery between Jan 1 and March 31, 2020, of whom 835 (74·0%) had emergency surgery and 280 (24·8%) had elective surgery. SARS-CoV-2 infection was confirmed preoperatively in 294 (26·1%) patients. 30-day mortality was 23·8% (268 of 1128). Pulmonary complications occurred in 577 (51·2%) of 1128 patients; 30-day mortality in these patients was 38·0% (219 of 577), accounting for 81·7% (219 of 268) of all deaths. In adjusted analyses, 30-day mortality was associated with male sex (odds ratio 1·75 [95% CI 1·28–2·40], p\textless0·0001), age 70 years or older versus younger than 70 years (2·30 [1·65–3·22], p\textless0·0001), American Society of Anesthesiologists grades 3–5 versus grades 1–2 (2·35 [1·57–3·53], p\textless0·0001), malignant versus benign or obstetric diagnosis (1·55 [1·01–2·39], p=0·046), emergency versus elective surgery (1·67 [1·06–2·63], p=0·026), and major versus minor surgery (1·52 [1·01–2·31], p=0·047). Interpretation: Postoperative pulmonary complications occur in half of patients with perioperative SARS-CoV-2 infection and are associated with high mortality. Thresholds for surgery during the COVID-19 pandemic should be higher than during normal practice, particularly in men aged 70 years and older. Consideration should be given for postponing non-urgent procedures and promoting non-operative treatment to delay or avoid the need for surgery. Funding: National Institute for Health Research (NIHR), Association of Coloproctology of Great Britain and Ireland, Bowel and Cancer Research, Bowel Disease Research Foundation, Association of Upper Gastrointestinal Surgeons, British Association of Surgical Oncology, British Gynaecological Cancer Society, European Society of Coloproctology, NIHR Academy, Sarcoma UK, Vascular Society for Great Britain and Ireland, and Yorkshire Cancer Research

Two FE models to analyse the dynamic response of short span simply-supported oblique high-speed railway bridges: Comparison and experimental validation

In this paper the dynamic response of a particular type of high-speed railway bridge common in the Spanish railway system is analysed with the aim of evaluating the levels of vertical vibrations experienced at the platform. To this end, Bracea I bridge which belongs to the Madrid-Sevilla High Speed railway line is selected. The bridge is composed by two identical short simply supported spans. The pre-stressed concrete girders deck dimensions and level of obliquity make this structure prone to (i) experience important vertical accelerations under railway traffic and (ii) present a dynamic response with a high participation of modes different from the longitudinal bending one. Therefore the structure is not expected to behave as a beam-type structure. The results of an experimental campaign recently performed at the site are presented with the objective of characterising the soil dynamic properties and the structure response under ambient vibration conditions and under railway traffic. The experimental response of the bridge is then compared in the time and frequency domains to numerical predictions given by two Finite Element models which adopt common assumptions in engineering practice. The study provides interesting conclusions regarding the structure experimental response under resonant and not resonant conditions. Additionally, conclusions regarding the adequacy of the numerical models for predicting the bridge response and assessing the Serviceability Limit State of vertical acceleration in ballasted railways are presented