Computational techniques for the assessment of fracture repair

The combination of high-resolution three-dimensional medical imaging, increased computing power, and modern computational methods provide unprecedented capabilities for assessing the repair and healing of fractured bone. Fracture healing is a natural process that restores the mechanical integrity of bone and is greatly influenced by the prevailing mechanical environment. Mechanobiological theories have been proposed to provide greater insight into the relationships between mechanics (stress and strain) and biology. Computational approaches for modelling these relationships have evolved from simple tools to analyze fracture healing at a single point in time to current models that capture complex biological events such as angiogenesis, stochasticity in cellular activities, and cell-phenotype specific activities. The predictive capacity of these models has been established using corroborating physical experiments. For clinical application, mechanobiological models accounting for patient-to-patient variability hold the potential to predict fracture healing and thereby help clinicians to customize treatment. Advanced imaging tools permit patient-specific geometries to be used in such models. Refining the models to study the strain fields within a fracture gap and adapting the models for case-specific simulation may provide more accurate examination of the relationship between strain and fracture healing in actual patients. Medical imaging systems have significantly advanced the capability for less invasive visualization of injured musculoskeletal tissues, but all too often the consideration of these rich datasets has stopped at the level of subjective observation. Computational image analysis methods have not yet been applied to study fracture healing, but two comparable challenges which have been addressed in this general area are the evaluation of fracture severity and of fracture-associated soft tissue injury. CT-based methodologies developed to assess and quantify these factors are described and results presented to show the potential of these analysis methods

µ-Particle tracking velocimetry and computational fluid dynamics study of cell seeding within a 3D porous scaffold

Cell seeding of 3D scaffolds is a critical step in tissue engineering since the final tissue properties are related to the initial cell distribution and density within the scaffold unit. Perfusion systems can transport cells to the scaffold however; the fact that cells flow inside the scaffold pores does not guarantee cell deposition onto the scaffold substrate and cell attachment. The aim of this study was to investigate how fluid flow conditions modulate cell motion and deposition during perfusion. For such a purpose, a multiphase-based computational fluid dynamics (CFD) model was developed in conjunction with particle tracking velocimetry experiments (PTV) which for the first time were applied to observe cell seeding inside a 3D scaffold. CFD and PTV results showed the strong effect of gravity for lower flow rates leading to cell sedimentation and poor transport of cells to the scaffold. Higher flow rates help overcome the effect of gravity so more cells travelling inside the scaffold were found. Nonetheless, fluid flow drags cells along the fluid streamlines without intercepting the scaffold substrate. As a consequence, if cells do not deposit into the scaffold substrate, cell adhesion cannot occur. Therefore, cell-scaffold interception should be promoted and the present computational model which predicts the effect of gravity and fluid drag on cells trajectories could serve to optimise bioreactors and enhance cell seeding efficiency

Demonstration of radon removal from SF6 using molecular sieves

The gas SF6 has become of interest as a negative ion drift gas for use in directional dark matter searches. However, as for other targets in such searches, it is important that radon contamination can be removed as this provides a source of unwanted background events. In this work we demonstrate for the first time filtration of radon from SF6 gas by using a molecular sieve. Four types of sieves from Sigma-Aldrich were investigated, namely 3Å, 4Å, 5Å and 13X. A manufactured radon source was used for the tests. This was attached to a closed loop system in which gas was flowed through the filters and a specially adapted Durridge RAD7 radon detector. In these measurements, it was found that only the 5Å type was able to significantly reduce the radon concentration without absorbing the SF6 gas. The sieve was able to reduce the initial radon concentration of 3875 ± 13 Bqm−3 in SF6 gas by 87% when cooled with dry ice. The ability of the cooled 5Å molecular sieve filter to significantly reduce radon concentration from SF6 provides a promising foundation for the construction of a radon filtration setup for future ultra-sensitive SF6 gas rare-event physics experiments

Tunneling of quantum rotobreathers

We analyze the quantum properties of a system consisting of two nonlinearly coupled pendula. This non-integrable system exhibits two different symmetries: a permutational symmetry (permutation of the pendula) and another one related to the reversal of the total momentum of the system. Each of these symmetries is responsible for the existence of two kinds of quasi-degenerated states. At sufficiently high energy, pairs of symmetry-related states glue together to form quadruplets. We show that, starting from the anti-continuous limit, particular quadruplets allow us to construct quantum states whose properties are very similar to those of classical rotobreathers. By diagonalizing numerically the quantum Hamiltonian, we investigate their properties and show that such states are able to store the main part of the total energy on one of the pendula. Contrary to the classical situation, the coupling between pendula necessarily introduces a periodic exchange of energy between them with a frequency which is proportional to the energy splitting between quasi-degenerated states related to the permutation symmetry. This splitting may remain very small as the coupling strength increases and is a decreasing function of the pair energy. The energy may be therefore stored in one pendulum during a time period very long as compared to the inverse of the internal rotobreather frequency.Comment: 20 pages, 11 figures, REVTeX4 styl

Efeito da Gliricidia sepium sobre nutrientes do solo, microclima e produtividade do milho em sistema agroflorestal no Agreste Paraibano.

Gliricidia sepium é uma leguminosa arbórea que tem sido utilizada em sistemas em aléias no semi-árido nordestino por apresentar bom desenvolvimento em condições de estresse hídrico. Entretanto, há pouca informação disponível sobre o efeito da introdução dessa espécie nos agroecossistemas da região. No presente estudo, objetivou-se avaliar a influência da distância de plantas de Gliricidia sepium sobre características da cultura do milho e do solo e microclima no Agreste Paraibano. O estudo foi realizado no município de Esperança (PB), em área de 0,5 ha, onde, em 1996, foram plantadas fileiras de G. sepium espaçadas 6 m entre si e com 1 m entre as árvores. Nesta área, em 2002, foram delimitadas quatro parcelas de 6 x 8 m e, em cada parcela, foi estabelecido um transeto perpendicular às fileiras de árvores com três posições de amostragem: (1) nas fileiras de árvores (0 m); (2) a 1 m das fileiras de árvores, e (3) a 3 m de distância das fileiras de árvores. O delineamento experimental utilizado foi em blocos casualizados com quatro repetições. A massa seca de folhedo caído embaixo da fileira de árvores foi de 1.390 kg ha-1 e diminuiu, gradativamente, para 270 kg ha-1 a 3 m de distância das árvores. As concentrações de P, K e matéria orgânica leve (MOL) embaixo das árvores foram maiores do que a 1 e 3 m de distância das fileiras. As médias mensais das temperaturas mínimas do ar e do solo embaixo e a 3 m das árvores foram similares. Entretanto, as médias mensais das temperaturas máximas do solo e do ar foram de 6 e 2 °C mais altas a 3 m das árvores, respectivamente, ao longo do período de estudo. A umidade do solo foi significativamente menor embaixo das árvores do que a 1 e 3 m de distância. O milho produziu mais grãos e palha e acumulou mais nutrientes nas posições mais próximas das fileiras de G. sepium

The exposure of the hybrid detector of the Pierre Auger Observatory

The Pierre Auger Observatory is a detector for ultra-high energy cosmic rays. It consists of a surface array to measure secondary particles at ground level and a fluorescence detector to measure the development of air showers in the atmosphere above the array. The "hybrid" detection mode combines the information from the two subsystems. We describe the determination of the hybrid exposure for events observed by the fluorescence telescopes in coincidence with at least one water-Cherenkov detector of the surface array. A detailed knowledge of the time dependence of the detection operations is crucial for an accurate evaluation of the exposure. We discuss the relevance of monitoring data collected during operations, such as the status of the fluorescence detector, background light and atmospheric conditions, that are used in both simulation and reconstruction.Comment: Paper accepted by Astroparticle Physic

Study of Tau-pair Production in Photon-Photon Collisions at LEP and Limits on the Anomalous Electromagnetic Moments of the Tau Lepton

Tau-pair production in the process e+e- -> e+e-tau+tau- was studied using data collected by the DELPHI experiment at LEP2 during the years 1997 - 2000. The corresponding integrated luminosity is 650 pb^{-1}. The values of the cross-section obtained are found to be in agreement with QED predictions. Limits on the anomalous magnetic and electric dipole moments of the tau lepton are deduced.Comment: 20 pages, 9 figures, Accepted by Eur. Phys. J.

Evidence for an Excess of Soft Photons in Hadronic Decays of Z^0

Soft photons inside hadronic jets converted in front of the DELPHI main tracker (TPC) in events of qqbar disintegrations of the Z^0 were studied in the kinematic range 0.2 < E_gamma < 1 GeV and transverse momentum with respect to the closest jet direction p_T < 80 MeV/c. A clear excess of photons in the experimental data as compared to the Monte Carlo predictions is observed. This excess (uncorrected for the photon detection efficiency) is (1.17 +/- 0.06 +/- 0.27) x 10^{-3} gamma/jet in the specified kinematic region, while the expected level of the inner hadronic bremsstrahlung (which is not included in the Monte Carlo) is (0.340 +/- 0.001 +/- 0.038) x 10^{-3} gamma/jet. The ratio of the excess to the predicted bremsstrahlung rate is then (3.4 +/- 0.2 +/- 0.8), which is similar in strength to the anomalous soft photon signal observed in fixed target experiments with hadronic beams.Comment: 37 pages, 9 figures, Accepted by Eur. Phys. J.

Study of Inclusive J/psi Production in Two-Photon Collisions at LEP II with the DELPHI Detector

Inclusive J/psi production in photon-photon collisions has been observed at LEP II beam energies. A clear signal from the reaction gamma gamma -> J/psi+X is seen. The number of observed N(J/psi -> mu+mu-) events is 36 +/- 7 for an integrated luminosity of 617 pb^{-1}, yielding a cross-section of sigma(J/psi+X) = 45 +/- 9 (stat) +/- 17 (syst) pb. Based on a study of the event shapes of different types of gamma gamma processes in the PYTHIA program, we conclude that (74 +/- 22)% of the observed J/psi events are due to `resolved' photons, the dominant contribution of which is most probably due to the gluon content of the photon.Comment: 13 pages, 8 figures, Accepted by Phys. Lett.