Elliptical-Core Highly Nonlinear Few-Mode Fiber Based OXC for WDM-MDM Networks

In order to realize an optical cross-connect (OXC) converting wavelengths and spatial modes into one-dimensional switching ports, we propose an active mode selective conversion without parasitic wavelength conversion, based on the intermodal four-wave mixing (FWM) arising in a few-mode fiber (FMF). First, we design a dispersion-engineered elliptical-core highly nonlinear FMF (e-HNL-FMF) with a graded refractive index (RI) profile, which can independently guide 3 linearly polarized (LP) spatial modes. Meanwhile, a high doping concentration of germanium in the core leads to relatively high intermodal nonlinear coefficients of 3.23 (W\ub7km)-1 between LP01 and LP11a modes and 3.14 (W\ub7km)-1 between LP01 and LP11b modes. Next, we propose an e-HNL-FMF based OXC scheme for wavelength division multiplexing-mode division multiplexing (WDM-MDM) networks. After optimizing both the e-HNL-FMF length and pump power, we can realize either active mode selective conversion over the designated wavelength-band or three-wavelength to three-mode superchannel conversion for 100 Gbaud 16-quadratic-amplitude modulation (16-QAM) signals over the C-band. Due to excellent characteristics of the e-HNL-FMF, both cost and configuration complexity of the OXC can be reduced, showing great potentials for all-optical signal processing in the future WDM-MDM networks

Superchannel Engineering with Microresonator Combs

We study segmenting the available bandwidth of a WDM system into microcombdrivensuperchannels. This solution improves the power per line while using a fraction of thepump power, making it potentially more favorable for integration

Coherent supercontinuum generation in all-normal dispersion Si3N4 waveguides

Spectral broadening of optical frequency combs with high repetition rate is of significant interest in optical communications, radio-frequency photonics and spectroscopy. Silicon nitride waveguides (Si3N4) in the anomalous dispersion region have shown efficient supercontinuum generation spanning an octave-bandwidth. However, the broadening mechanism in this regime is usually attained with femtosecond pulses in order to maintain the coherence. Supercontinuum generation in the normal dispersion regime is more prone to longer (ps) pulses, but the implementation in normal dispersion silicon nitride waveguides is challenging as it possesses strong requirements in propagation length and losses. Here, we experimentally demonstrate the use of a Si3N4 waveguide to perform coherent spectral broadening using pulses in the picosecond regime with high repetition rate. Moreover, our work explores the formation of optical wave breaking using a higher energy pulse which enables the generation of a coherent octave spanning spectrum. These results offer a new prospect for coherent broadening using long duration pulses and replacing bulky optical components

Vector mode inter-modal wavelength conversion in a dispersion tailored highly nonlinear few-mode fibre

We present the design and fabrication of a dispersion tailored highly nonlinear few-mode fibre with an inter-modal nonlinear coefficient of 2.81 (W \ub7 km)-1, the highest reported to date. Inter-modal wavelength conversion between the HE21 and TE01 vector modes is demonstrated in the fibre

Superchannel engineering of microcombs for optical communications

Microresonator frequency combs (microcombs) are a promising technology for generating frequency carriers for wavelength division multiplexing (WDM) systems. Multi-terabit per second WDM coherent transmitters have recently been demonstrated using both dissipative Kerr solitons and mode-locked dark pulses in optical microresonators. These experiments have focused on microcombs designed to cover a large portion of the erbium-doped fiber window. However, the question of optimum bandwidth for microcombs in WDM systems has not been addressed. Here we show that segmenting the bandwidth into smaller microcomb-driven superchannels results in an improvement of power per line. Through numerical simulations we establish a quantitative comparison between dark-pulse and soliton microcombs in WDM systems, including aspects such as conversion efficiency, tolerance to intrinsic cavity loss, and group velocity dispersion engineering. We show that the improvement of minimum line power scales linearly with the number of superchannels for both types of microcombs. This work provides useful guidelines for the design of multi-terabit per second microcomb-based superchannel systems

Single Dark-Pulse Kerr Comb Supporting 1.84 Pbit/s Transmission over 37-Core Fiber

We show that a single dark-pulse Kerr comb can generate high enough OSNR to carry 1.84 Pbit/s data, achieved by 223 WDM spectral lines modulated with 32-Gbaud, SNR-adapted probabilistically shaped DP-QAM, over a 37-core fiber

Measurement of CP Asymmetries and Branching Fractions in Charmless Two-Body B-Meson Decays to Pions and Kaons

We present improved measurements of CP-violation parameters in the decays $B^0 \to \pi^+ \pi^-$, $B^0 \to K^+ \pi^-$, and $B^0 \to \pi^0 \pi^0$, and of the branching fractions for $B^0 \to \pi^0 \pi^0$ and $B^0 \to K^0 \pi^0$. The results are obtained with the full data set collected at the $\Upsilon(4S)$ resonance by the BABAR experiment at the PEP-II asymmetric-energy $B$ factory at the SLAC National Accelerator Laboratory, corresponding to $467 \pm 5$ million $B\bar B$ pairs. We find the CP-violation parameter values and branching fractions $S_{\pi^+\pi^-} = -0.68 \pm 0.10 \pm 0.03, C_{\pi^+\pi^-} = -0.25 \pm 0.08 \pm 0.02, A_{K^-\pi^+} = -0.107 \pm 0.016 ^{+0.006}_{-0.004}, C_{\pi^0\pi^0} = -0.43 \pm 0.26 \pm 0.05, Br(B^0 \to \pi^0 \pi^0) = (1.83 \pm 0.21 \pm 0.13) \times 10^{-6}, Br(B^0 \to K^0 \pi^0) = (10.1 \pm 0.6 \pm 0.4) \times 10^{-6},$ where in each case, the first uncertainties are statistical and the second are systematic. We observe CP violation with a significance of 6.7 standard deviations for $B^0 \to\pi^+\pi^-$ and 6.1 standard deviations for $B^0 \to K^+ \pi^-$, including systematic uncertainties. Constraints on the Unitarity Triangle angle $\alpha$ are determined from the isospin relations among the $B \to \pi\pi$ rates and asymmetries. Considering only the solution preferred by the Standard Model, we find $\alpha$ to be in the range $[71^\circ,109^\circ]$ at the 68% confidence level.Comment: 18 pages, 11 postscript figures, submitted to Phys. Rev.

Roadmap on all-optical processing

The ability to process optical signals without passing into the electrical domain has always attracted the attention of the research community. Processing photons by photons unfolds new scenarios, in principle allowing for unseen signal processing and computing capabilities. Optical computation can be seen as a large scientific field in which researchers operate, trying to find solutions to their specific needs by different approaches; although the challenges can be substantially different, they are typically addressed using knowledge and technological platforms that are shared across the whole field. This significant know-how can also benefit other scientific communities, providing lateral solutions to their problems, as well as leading to novel applications. The aim of this Roadmap is to provide a broad view of the state-of-the-art in this lively scientific research field and to discuss the advances required to tackle emerging challenges, thanks to contributions authored by experts affiliated to both academic institutions and high-tech industries. The Roadmap is organized so as to put side by side contributions on different aspects of optical processing, aiming to enhance the cross-contamination of ideas between scientists working in three different fields of photonics: optical gates and logical units, high bit-rate signal processing and optical quantum computing. The ultimate intent of this paper is to provide guidance for young scientists as well as providing research-funding institutions and stake holders with a comprehensive overview of perspectives and opportunities offered by this research field

Combined measurements of Higgs boson couplings in proton- proton collisions at v s=13TeV

Combined measurements of the production and decay rates of the Higgs boson, as well as its couplings to vector bosons and fermions, are presented. The analysis uses the LHC proton-proton collision data set recorded with the CMS detector in 2016 at fb-1. The combination is based on analyses targeting the five main Higgs boson production mechanisms (gluon fusion, vector boson fusion, and associated production with a W or Z boson, or a top quark-antiquark pair) and the following decay modes: H, ZZ, WW, , bb, and . Searches for invisible Higgs boson decays are also considered. The best-fit ratio of the signal yield to the standard model expectation is measured to be =1.17 +/- 0.10, assuming a Higgs boson mass of 125.09. Additional results are given for various assumptions on the scaling behavior of the production and decay modes, including generic parametrizations based on ratios of cross sections and branching fractions or couplings. The results are compatible with the standard model predictions in all parametrizations considered. In addition, constraints are placed on various two Higgs doublet models.Peer reviewe