Track reconstruction and matching between emulsion and silicon pixel detectors for the SHiP-charm experiment

In July 2018 an optimization run for the proposed charm cross section measurement for SHiP was performed at the CERN SPS. A heavy, moving target instrumented with nuclear emulsion films followed by a silicon pixel tracker was installed in front of the Goliath magnet at the H4 proton beam-line. Behind the magnet, scintillating-fibre, drift-tube and RPC detectors were placed. The purpose of this run was to validate the measurement's feasibility, to develop the required analysis tools and fine-tune the detector layout. In this paper, we present the track reconstruction in the pixel tracker and the track matching with the moving emulsion detector. The pixel detector performed as expected and it is shown that, after proper alignment, a vertex matching rate of 87% is achieved.Peer Reviewe

Determination of the Form Factors for the Decay B0 --> D*-l+nu_l and of the CKM Matrix Element |Vcb|

We present a combined measurement of the Cabibbo-Kobayashi-Maskawa matrix element $|V_{cb}|$ and of the parameters $\rho^2$, $R_1$, and $R_2$, which fully characterize the form factors of the $B^0 \to D^{*-}\ell^{+}\nu_\ell$ decay in the framework of HQET, based on a sample of about 52,800 $B^0 \to D^{*-}\ell^{+}\nu_\ell$ decays recorded by the BABAR detector. The kinematical information of the fully reconstructed decay is used to extract the following values for the parameters (where the first errors are statistical and the second systematic): $\rho^2 = 1.156 \pm 0.094 \pm 0.028$, $R_1 = 1.329 \pm 0.131 \pm 0.044$, $R_2 = 0.859 \pm 0.077 \pm 0.022$, $\mathcal{F}(1)|V_{cb}| = (35.03 \pm 0.39 \pm 1.15) \times 10^{-3}$. By combining these measurements with the previous BABAR measurements of the form factors which employs a different technique on a partial sample of the data, we improve the statistical accuracy of the measurement, obtaining: $\rho^2 = 1.179 \pm 0.048 \pm 0.028, R_1 = 1.417 \pm 0.061 \pm 0.044, R_2 = 0.836 \pm 0.037 \pm 0.022,$ and $\mathcal{F}(1)|V_{cb}| = (34.68 \pm 0.32 \pm 1.15) \times 10^{-3}.$ Using the lattice calculations for the axial form factor $\mathcal{F}(1)$, we extract $|V_{cb}| =(37.74 \pm 0.35 \pm 1.25 \pm ^{1.23}_{1.44}) \times 10^{-3}$, where the third error is due to the uncertainty in $\mathcal{F}(1)$

Study of the Exclusive Initial-State Radiation Production of the DDˉD \bar D System

A study of exclusive production of the $D \bar D$ system through initial-state r adiation is performed in a search for charmonium states, where $D=D^0$ or $D^+$. The $D^0$ mesons are reconstructed in the $D^0 \to K^- \pi^+$, $D^0 \to K^- \pi^+ \pi^0$, and $D^0 \to K^- \pi^+ \pi^+ \pi^-$ decay modes. The $D^+$ is reconstructed through the $D^+ \to K^- \pi^+ \pi^+$ decay mode. The analysis makes use of an integrated luminosity of 288.5 fb$^{-1}$ collected by the BaBar experiment. The $D \bar D$ mass spectrum shows a clear $\psi(3770)$ signal. Further structures appear in the 3.9 and 4.1 GeV/$c^2$ regions. No evidence is found for Y(4260) decays to $D \bar D$, implying an up per limit \frac{\BR(Y(4260)\to D \bar D)}{\BR(Y(4260)\to J/\psi \pi^+ \pi^-)} < 7.6 (95 % confidence level)

Measurement of the muon flux from 400 GeV/c protons interacting in a thick molybdenum/tungsten target

The SHiP experiment is proposed to search for very weakly interacting particles beyond the Standard Model which are produced in a 400 GeV/c proton beam dump at the CERN SPS. About 1011 muons per spill will be produced in the dump. To design the experiment such that the muon-induced background is minimized, a precise knowledge of the muon spectrum is required. To validate the muon flux generated by our Pythia and GEANT4 based Monte Carlo simulation (FairShip), we have measured the muon flux emanating from a SHiP-like target at the SPS. This target, consisting of 13 interaction lengths of slabs of molybdenum and tungsten, followed by a 2.4 m iron hadron absorber was placed in the H4 400 GeV/c proton beam line. To identify muons and to measure the momentum spectrum, a spectrometer instrumented with drift tubes and a muon tagger were used. During a 3-week period a dataset for analysis corresponding to (3.27±0.07) × 1011 protons on target was recorded. This amounts to approximatively 1% of a SHiP spill

Track reconstruction and matching between emulsion and silicon pixel detectors for the SHiP-charm experiment

In July 2018 an optimization run for the proposed charm cross section measurement for SHiP was performed at the CERN SPS. A heavy, moving target instrumented with nuclear emulsion films followed by a silicon pixel tracker was installed in front of the Goliath magnet at the H4 proton beam-line. Behind the magnet, scintillating-fibre, drift-tube and RPC detectors were placed. The purpose of this run was to validate the measurement's feasibility, to develop the required analysis tools and fine-tune the detector layout. In this paper, we present the track reconstruction in the pixel tracker and the track matching with the moving emulsion detector. The pixel detector performed as expected and it is shown that, after proper alignment, a vertex matching rate of 87% is achieved

Measurements of Branching Fractions, Polarizations, and Direct CP-Violation Asymmetries in B→ρK∗ and B→f0(980)K∗ Decays

We report searches for B -meson decays to the charmless final states ρ K ∗ and f 0 ( 980 ) K ∗ with a sample of 232 × 10 6 B ¯¯¯ B pairs collected with the BABAR detector at the PEP-II e + e − collider. We measure in units of 10 − 6 the following branching fractions, where the first error quoted is statistical and the second systematic, or upper limits are given at the 90% confidence level : B ( B + → ρ 0 K * + ) < 6.1 , B ( B + → ρ + K * 0 ) = 9.6 ± 1.7 ± 1.5 , B ( B 0 → ρ − K * + ) < 12.0 , B ( B 0 → ρ 0 K * 0 ) = 5.6 ± 0.9 ± 1.3 , B ( B + → f 0 ( 980 ) K * + ) = 5.2 ± 1.2 ± 0.5 , and B ( B 0 → f 0 ( 980 ) K * 0 ) < 4.3 . For the significant modes, we also measure the fraction of longitudinal polarization and the charge asymmetry: f L ( B + → ρ + K * 0 ) = 0.52 ± 0.10 ± 0.04 , f L ( B 0 → ρ 0 K * 0 ) = 0.57 ± 0.09 ± 0.08 , A C P ( B + → ρ + K * 0 ) = − 0.01 ± 0.16 ± 0.02 , A C P ( B 0 → ρ 0 K * 0 ) = 0.09 ± 0.19 ± 0.02 , and A C P ( B + → f 0 ( 980 ) K * + ) = − 0.34 ± 0.21 ± 0.03