Maximum Visibility Building Direction for Layered Manufacturing of Jewel Rings

Rapid prototyping is used in jewelry production since the introduction of Stereolithography Apparatus into the market. However, the building orientation is mainly decided by the experience of the operator rather than by any systematic analysis. A theory is therefore needed to analyze the best orientation of jewelry in rapid jewelry production. In this paper, a new orientation methodology is applied to jewel ring models to properly orient them for layer manufacturing. Jewel ring model built is then demonstrated to have better quality and less error. A case study is presented to illustrate the theory.The work described in this paper was supported by a grant from the Hong Kong Polytechnic University (Project No.: G-V617).Mechanical Engineerin

A fuzzy ordinary regression method for modeling customer preference in tea maker design

Faced with fierce competition in marketplaces, manufacturers need to determine the appropriate settings of engineering characteristics of the new products so that the best customer preferences of the products can be obtained. To achieve this, functional models relating customer preferences to engineering characteristics need to be developed. As information regarding functional relationships between customer preferences are generally subjective or heuristic in nature, development of the customer preference models involve two uncertainties, namely fuzziness and randomness. Existing approaches use only fuzzy-based technologies to address the uncertainty caused by fuzziness. They are not designed to address the randomness of the observed data which is caused by a limited knowledge of the variability of influences between customer preferences and engineering characteristics. In this article, a fuzzy ordinary regression method is proposed to develop the customer preference models which are capable of addressing the two uncertainties of crispness and fuzziness of the customer preferences. A case study of a tea maker design which involves both uncertainties is used to demonstrate the effectiveness of the proposed method

Modeling manufacturing processes using a genetic programming-based fuzzy regression with detection of outliers

Fuzzy regression (FR) been demonstrated as a promising technique for modeling manufacturing processes where availability of data is limited. FR can only yield linear type FR models which have a higher degree of fuzziness, but FR ignores higher order or interaction terms and the influence of outliers, all of which usually exist in the manufacturing process data. Genetic programming (GP), on the other hand, can be used to generate models with higher order and interaction terms but it cannot address the fuzziness of the manufacturing process data. In this paper, genetic programming-based fuzzy regression (GP-FR), which combines the advantages of the two approaches to overcome the deficiencies of the commonly used existing modeling methods, is proposed in order to model manufacturing processes. GP-FR uses GP to generate model structures based on tree representation which can represent interaction and higher order terms of models, and it uses an FR generator based on fuzzy regression to determine outliers in experimental data sets. It determines the contribution and fuzziness of each term in the model by using experimental data excluding the outliers. To evaluate the effectiveness of GP-FR in modeling manufacturing processes, it was used to model a non-linear system and an epoxy dispensing process. The results were compared with those based on two commonly used FR methods, Tanka's FR and Peters' FR. The prediction accuracy of the models developed based on GP-FR was shown to be better than that of models based on the other two FR methods

Improved orthogonal array based simulated annealing for design optimization

Recent research shows that simulated annealing with orthogonal array based neighbourhood functions can help in the search for a solution to a parametrical problem which is closer to an optimum when compared with conventional simulated annealing. Previous studies of simulated annealing analyzed only the main effects of variables of parametrical problems. In fact, both main effects of variables and interactions between variables should be considered, since interactions between variables exist in many parametrical problems. In this paper, an improved orthogonal array based neighbourhood function (IONF) for simulated annealing with the consideration of interaction effects between variables is described. After solving a set of parametrical benchmark function problems where interaction effects between variables exist, results of the benchmark tests show that the proposed simulated annealing algorithm with the IONF outperforms significantly both the simulated annealing algorithms with the existing orthogonal array based neighbourhood functions and the standard neighbourhood functions. Finally, the improved orthogonal array based simulated annealing was applied on the optimization of emulsified dynamite packing-machine design by which the applicability of the algorithm in real world problems can be evaluated and its effectiveness can be further validated

Market segmentation and ideal point identification for new product design using fuzzy data compression and fuzzy clustering methods

In product design, various methodologies have been proposed for market segmentation, which group consumers with similar customer requirements into clusters. Central points on market segments are always used as ideal points of customer requirements for product design, which reflects particular competitive strategies to effectively reach all consumers’ interests. However, existing methodologies ignore the fuzziness on consumers’ customer requirements. In this paper, a new methodology is proposed to perform market segmentation based on consumers’ customer requirements, which exist fuzziness. The methodology is an integration of a fuzzy compression technique for multi-dimension reduction and a fuzzy clustering technique. It first compresses the fuzzy data regarding customer requirements from high dimensions into two dimensions. After the fuzzy data is clustered into marketing segments, the centre points of market segments are used as ideal points for new product development. The effectiveness of the proposed methodology in market segmentation and identification of the ideal points for new product design is demonstrated using a case study of new digital camera design

Affective design using machine learning : a survey and its prospect of conjoining big data

Customer satisfaction in purchasing new products is an important issue that needs to be addressed in today’s competitive markets. Consumers not only need to be solely satisfied with the functional requirements of a product, and they are also concerned with the affective needs and aesthetic appreciation of the product. A product with good affective design excites consumer emotional feelings so as to buy the product. However, affective design often involves complex and multi-dimensional problems for modelling and maximising affective satisfaction of customers. Machine learning is commonly used to model and maximise the affective satisfaction, since it is effective in modelling nonlinear patterns when numerical data relevant to the patterns is available. This article presents a survey of commonly used machine learning approaches for affective design when two data streams namely traditional survey data and modern big data are used. A classification of machine learning technologies is first provided which is developed using traditional survey data for affective design. The limitations and advantages of each machine learning technology are also discussed and we summarize the uses of machine learning technologies for affective design. This review article is useful for those who use machine learning technologies for affective design. The limitations of using traditional survey data are then discussed which is time consuming to collect and cannot fully cover all the affective domains for product development. Nowadays, big data related to affective design can be captured from social media. The prospects and challenges in using big data are discussed so as to enhance affective design, in which very limited research has so far been attempted. This article provides guidelines for researchers who are interested in exploring big data and machine learning technologies for affective design

Polynomial modeling for time-varying systems based on a particle swarm optimization algorithm

In this paper, an effective particle swarm optimization (PSO) is proposed for polynomial models for time varying systems. The basic operations of the proposed PSO are similar to those of the classical PSO except that elements of particles represent arithmetic operations and variables of time-varying models. The performance of the proposed PSO is evaluated by polynomial modeling based on various sets of time-invariant and time-varying data. Results of polynomial modeling in time-varying systems show that the proposed PSO outperforms commonly used modeling methods which have been developed for solving dynamic optimization problems including genetic programming (GP) and dynamic GP. An analysis of the diversity of individuals of populations in the proposed PSO and GP reveals why the proposed PSO obtains better results than those obtained by GP

d-alpha Correlation functions and collective motion in Xe+Au collisions at E/A=50 MeV

The interplay of the effects of geometry and collective motion on d-$\alpha$ correlation functions is investigated for central Xe+Au collisions at E/A=50 MeV. The data cannot be explained without collective motion, which could be partly along the beam axis. A semi-quantitative description of the data can be obtained using a Monte-Carlo model, where thermal emission is superimposed on collective motion. Both the emission volume and the competition between the thermal and collective motion influence significantly the shape of the correlation function, motivating new strategies for extending intensity interferometry studies to massive particles.Comment: Accepted for publication on Physics Letters

Functional mechanisms underlying pleiotropic risk alleles at the 19p13.1 breast-ovarian cancer susceptibility locus

A locus at 19p13 is associated with breast cancer (BC) and ovarian cancer (OC) risk. Here we analyse 438 SNPs in this region in 46,451 BC and 15,438 OC cases, 15,252 BRCA1 mutation carriers and 73,444 controls and identify 13 candidate causal SNPs associated with serous OC (P=9.2 × 10-20), ER-negative BC (P=1.1 × 10-13), BRCA1-associated BC (P=7.7 × 10-16) and triple negative BC (P-diff=2 × 10-5). Genotype-gene expression associations are identified for candidate target genes ANKLE1 (P=2 × 10-3) and ABHD8 (P<2 × 10-3). Chromosome conformation capture identifies interactions between four candidate SNPs and ABHD8, and luciferase assays indicate six risk alleles increased transactivation of the ADHD8 promoter. Targeted deletion of a region containing risk SNP rs56069439 in a putative enhancer induces ANKLE1 downregulation; and mRNA stability assays indicate functional effects for an ANKLE1 3′-UTR SNP. Altogether, these data suggest that multiple SNPs at 19p13 regulate ABHD8 and perhaps ANKLE1 expression, and indicate common mechanisms underlying breast and ovarian cancer risk

Oncogenic Signaling Pathways in The Cancer Genome Atlas

Genetic alterations in signaling pathways that control cell-cycle progression, apoptosis, and cell growth are common hallmarks of cancer, but the extent, mechanisms, and co-occurrence of alterations in these pathways differ between individual tumors and tumor types. Using mutations, copy-number changes, mRNA expression, gene fusions and DNA methylation in 9,125 tumors profiled by The Cancer Genome Atlas (TCGA), we analyzed the mechanisms and patterns of somatic alterations in ten canonical pathways: cell cycle, Hippo, Myc, Notch, Nrf2, PI-3-Kinase/Akt, RTK-RAS, TGFb signaling, p53 and beta-catenin/Wnt. We charted the detailed landscape of pathway alterations in 33 cancer types, stratified into 64 subtypes, and identified patterns of co-occurrence and mutual exclusivity. Eighty-nine percent of tumors had at least one driver alteration in these one alteration potentially targetable by currently available drugs. Thirty percent of tumors had multiple targetable alterations, indicating opportunities for combination therapy