Pulse Dynamics in a Chain of Granules With Friction

We study the dynamics of a pulse in a chain of granules with friction. We present theories for chains of cylindrical granules (Hertz potential with exponent $n=2$) and of granules with other geometries ($n>2$). Our results are supported via numerical simulations for cylindrical and for spherical granules ($n=5/2$).Comment: Submitted to PR

Evidence for a Photospheric Component in the Prompt Emission of the Short GRB120323A and its Effects on the GRB Hardness-Luminosity Relation

The short GRB 120323A had the highest flux ever detected with the Fermi/GBM. Here we study its remarkable spectral properties and their evolution using two spectral models: (i) a single emission component scenario, where the spectrum is modeled by the empirical Band function, and (ii) a two component scenario, where thermal (Planck-like) emission is observed simultaneously with a non-thermal component (a Band function). We find that the latter model fits the integrated burst spectrum significantly better than the former, and that their respective spectral parameters are dramatically different: when fit with a Band function only, the Epeak of the event is unusually soft for a short GRB, while adding a thermal component leads to more typical short GRB values. Our time-resolved spectral analysis produces similar results. We argue here that the two-component model is the preferred interpretation for GRB 120323A, based on: (i) the values and evolution of the Band function parameters of the two component scenario, which are more typical for a short GRB, and (ii) the appearance in the data of a significant hardness-intensity correlation, commonly found in GRBs, when we employee two-component model fits; the correlation is non-existent in the Band-only fits. GRB 110721A, a long burst with an intense photospheric emission, exhibits the exact same behavior. We conclude that GRB 120323A has a strong photospheric emission contribution, first time observed in a short GRB. Magnetic dissipation models are difficult to reconcile with these results, which instead favor photospheric thermal emission and fast cooling synchrotron radiation from internal shocks. Finally, we derive a possibly universal hardness-luminosity relation in the source frame using a larger set of GRBs L,i=(1.59+/-0.84).10^50 (Epeak,i)^(1.33+/-0.07) erg/s), which could be used as a possible redshift estimator for cosmology.Comment: 27 pages, 13 figures, Accepted by ApJ (April, 7th 2013

Development of Flutter Constraints for High-fidelity Aerostructural Optimization

Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/143080/1/6.2017-4455.pd

LOW-Γ JETS from COMPACT STELLAR MERGERS: CANDIDATE ELECTROMAGNETIC COUNTERPARTS to GRAVITATIONAL WAVE SOURCES

The American Astronomical Society. All rights reserved.Short gamma-ray bursts (GRBs) are believed to be produced by relativistic jets from mergers of neutron stars (NSs) or NSs and black-holes (BHs). If the Lorentz-factors Γ of jets from compact stellar mergers follow a similar power-law distribution to those observed for other high-energy astrophysical phenomena (e.g., blazars, active galactic nuclei), the population of jets should be dominated by low-Γ outflows. These jets will not produce prompt gamma-rays, but jet energy will be released as X-ray/optical/radio transients when they collide with the ambient medium. Using Monte Carlo simulations, we study the properties of such transients. Approximately 78% of merger jets Mpc result in failed GRBs if the jet Γ follows a power-law distribution of index -1.75. X-ray/optical transients from failed GRBs will have broad distributions of their characteristics: light-curves peak tp ∼ 0.1-10 days after a merger; flux peaks for X-ray 10-6 mJy ≲ Fx ≲ 10-2 mJy; and optical flux peaks at 14 ≲ mg ≲ 22. X-ray transients are detectable by Swift XRT, and ∼85% of optical transients will be detectable by telescopes with limiting magnitude mg ≳ 21, for well localized sources on the sky. X-ray/optical transients are followed by radio transients with peak times narrowly clustered around tp ∼ 10 days, and peak flux of ∼10-100 mJy at 10 GHz and ∼0.1 mJy at 150 MHz. By considering the all-sky rate of short GRBs within the LIGO/Virgo range, the rate of on-axis orphan afterglows from failed GRBs should be 2.6(26) per year for NS-NS(NS-BH) mergers, respectively. Since merger jets from gravitational-wave (GW) trigger events tend to be directed to us, a significant fraction of GW events could be associated with the on-axis orphan afterglow

PhenoWorld : a new paradigm to screen rodent behavior

Modeling depression in animals has inherent complexities that are augmented by intrinsic difficulties to measure the characteristic features of the disorder. Herein, we describe the PhenoWorld (PhW), a new setting in which groups of six rats lived in an ethological enriched environment, and have their feeding, locomotor activity, sleeping and social behavior automatically monitored. A battery of emotional and cognitive tests was used to characterize the behavioral phenotype of animals living in the PhW and in standard conditions (in groups of six and two rats), after exposure to an unpredictable chronic mild stress paradigm (uCMS) and antidepressants. Data reveal that animals living in the PhW displayed similar, but more striking, behavioral differences when exposed to uCMS, such as increased behavioral despair shown in the forced swimming test, resting/sleep behavior disturbances and reduced social interactions. Moreover, several PhW-cage behaviors, such as spontaneous will to go for food or exercise in running wheels, proved to be sensitive indicators of depressive-like behavior. In summary, this new ethological enriched paradigm adds significant discriminative power to screen depressive-like behavior, in particularly rodent's hedonic behavior

The Afterglows of Swift-era Gamma-Ray Bursts II.: Type I GRB versus Type II GRB Optical Afterglows

We use a large sample of GRB afterglow and prompt-emission data (adding further GRB afterglow observations in this work) to compare the optical afterglows (or the lack thereof) of Type I GRBs with those of Type II GRBs. In comparison to the afterglows of Type II GRBs, we find that those of Type I GRBs have a lower average luminosity and show an intrinsic spread of luminosities at least as wide. From late and deep upper limits on the optical transients, we establish limits on the maximum optical luminosity of any associated supernova, confirming older works and adding new results. We use deep upper limits on Type I GRB optical afterglows to constrain the parameter space of possible mini-SN emission associated with a compact-object merger. Using the prompt emission data, we search for correlations between the parameters of the prompt emission and the late optical afterglow luminosities. We find tentative correlations between the bolometric isotropic energy release and the optical afterglow luminosity at a fixed time after trigger (positive), and between the host offset and the luminosity (negative), but no significant correlation between the isotropic energy release and the duration of the GRBs. We also discuss three anomalous GRBs, GRB 060505, GRB 060614, and GRB 060121, in the light of their optical afterglow luminosities. (Abridged)Comment: Re-submitted to ApJ; 56 pages in emulateapj format; strongly expanded and revised in answer to referee report, added original photometry data; 30 pages main text, 13 pages Appendix, 6 pages references, 5 tables, 16 figures; Figures 1 to 8 downgraded to fit arXiv space restriction

Interests of 5 axis toolpaths generation for Wire Arc Additive Manufacturing of aluminum alloys

Additive Manufacturing (AM) for metal part can be divided into two different types: The powder technology and the wire technology. Usually, powder is adapted for fine components and small parts whereas wire is used for structural components and large scale part. One of the main benefits of AM is to simplify assemblies by reducing the number of components and to provide a large freedom of design. A standard AM system consists of a combination of three blocks: a motion system, a heat source and a feedstock. For Wire Arc Additive Manufacturing (WAAM), the heat source is a welding generator and the feedstock is a wire. The motion system generally used is a 6 axis robot or a CNC machine. This paper aims to propose a methodology to generate 5 axis toolpaths for WAAM and highlight the main parameters which selection is a key issue to resolve. The goal is to compare 3 axis and 5 axis toolpaths on part accuracy, depending the clearance angle of the part