The Prediction of Tear Strength of plain weave fabric Using Linear Regression Models

The aim of the study is to predict the tear strength of plain weave fabric by knowing the yarn count, yarn tensile strength and the fabric linear density. A total of nine fabric samples (produced of three different yarn counts which were 36.88, 29.50 and 9.83 tex) were produced in deferent densities at weft direction which were 4.33, 7.08 and 8.26 threads per cm, while the density was fixed at the warp direction in 9.84 ends per cm . Tensile strength was tested for these fabrics at warp and weft direction. The results were analyzed and incorporated in the Min-Tab program and the development of regression coefficients and correlation between variables to obtain equations to predict the tear strength at warp and weft direction

Simulation of Water Proofing Building Using Poly Ethylene (PE) Sheets

The research focused on how to use high density poly ethylene )HDPE( sheets in waterproofing operations of floor buildings (bathrooms, kitchens, basements and swimming pools), which uses Bitumen and how the Bitumen is modified by introducing some polymeric materials, until using of forced thermoplastic booster (carbon black or Fiber Glass). In insulation process HDPE sheets is placed under the concrete floor, which displays the sheet pressure and this pressure causes the stresses and deformations in the insulation material by using (solid work program) the geometric design sample dimensions were determined using stress analysis and simulation the input data are the material (HDPE) characteristics such as density, tensile strain, the poison ratio and tear resistance. The applied load on the sheet is a tile weight was analyzed by (solid work program) to determine stresses and deformations that have occurred to the insulation material. Absorption coefficient of moisture conducting test shows the HDPE has an excellent absorption properties to use in waterproofing, when using insulation material under concrete, the concrete dry out after 12 hours; which would lead to more cohesion of cement and concrete. Noting that the concrete without using insulation material will dry within 3 hours

Effects of Losartan versus Enalapril on Serum Uric Acid Levels in Hypertensive Patients with Metabolic Syndrome

To investigate the effects of losartan and enalapril on serum uric acid in hypertensive patients with metabolic syndrome, one hundred and twenty six newly diagnosed mild hypertensive patients, having markers of metabolic syndrome included  in the study. The patients were divided into two groups. Group 1 (60 patients) was given losartan (50 mg/ day) and group 2 (66 patients)  enalapril (20 mg/ day) for a duration of 2 months. A control group of seventy apparently healthy individuals were included. Metabolic syndrome was diagnosed according to diagnostic criteria of metabolic syndrome related to the American National Cholesterol Education Program-Adult Treatment Panel III. Serum uric acid levels were measured before and after drug administration. The results revealed a significant higher levels of uric acid were found in the hypertensive patients as compared with control group and a  significant drop of uric acid was noted after treatment with losartan but not with enalapril.  In conclusions: this study demonstrates significantly higher serum uric acid concentrations in hypertensive patients having markers of metabolic syndrome. Losartan but not enalapril therapy produced a significant fall in the serum uric acid level. Losartan can be useful therapeutic agent to control blood pressure and to reduce serum uric acid level in hypertensive patients having markers of metabolic syndrome and hyperuricaemia. Key words: Hypertension, metabolic syndrome, uric acid, losartan, enalapril

Incidence and characteristics of distal radius fractures in a southern Swedish region

<p>Abstract</p> <p>Background</p> <p>The incidence of distal radius fracture has increased substantially during the last 50 years according to several studies that estimated the overall incidence in various general populations. The incidence of fracture classified according to severity has not been well documented. The aim of this population-based study was to estimate the overall and type-specific incidence rates of distal radius fracture in a representative population in southern Sweden.</p> <p>Methods</p> <p>During 2001, all persons older than 18 years with acute distal radius fracture in the southern Swedish region of Northeastern Scania were prospectively recorded. A radiologist classified the fractures according to the AO system and measured volar tilt and ulnar variance. A fracture with volar tilt outside a range of -5° to 20° and/or ulnar variance of 2 mm or greater was defined as displaced.</p> <p>Results</p> <p>335 persons with acute distal radius fracture were recorded during the 1-year period. The overall incidence rate was 26 (95% confidence interval 23–29) per 10,000 person-years. Among women the incidence rate increased rapidly from the age of 50 and reached a peak of 119 per 10,000 person-years in women 80 years and older. The incidence rate among women 50 to 79 years old (56 per 10,000 person-years) was lower than that reported in previous studies of similar populations. Among men the incidence rate was low until the age of 80 years and older when it increased to 28 per 10,000 person-years. Fractures classified as AO type A comprised about 80% of the fractures in women and 64% in men. Almost two-thirds of all fractures were displaced and among men and women 80 years and older more than 80% of the fractures were displaced.</p> <p>Conclusion</p> <p>The incidence rate of distal radius fracture in women 50 to 79 years old was lower than previously reported, which may indicate declining incidence in this group. In both sexes, the incidence was highest in the age group of 80 years and older. With a growing number of elderly in the general population, the impact of distal radius fracture in the future may be considerable.</p

Prevalence of somatisation and psychologisation among patients visiting primary health care centres in the State of Qatar

Background: Medically unexplained somatic complaints are among the most common clinical presentations in primary care in developing countries and they are considerable burden for patients and health care system. Objectives: The aim of this study was to determine the prevalence of somatisation in comparison to psychologisation among a sample of Qatari patients who were visiting primary health care (PHC) centres and to investigate the clinical and socio-demographic characteristics of somatisers (STs) and psychologisers (PGs). Method: The survey was conducted among PHC Qatari patients during the period from January to July 2007. About 2,320 patients were approached, of whom 1,689 agreed to participate and responded to the questionnaire. Among the studied Qatari patients, 404 patients were identified for clinical interview. The first stage of the study was conducted with the help of general practitioners, using the 12-item General Health Questionnaire. The second stage was carried out by a consultant using the Clinical Interview Schedule. A specific operational criterion was used to identify STs and PGs. Results: The prevalence rate of STs among the total studied sample was 12.4%, while the PGs were 11.5%. Among the identified psychiatric cases, the proportion of STs (52%) was higher than PGs (48%). Most of the diagnostic categories were more prevalent among PGs. The dissatisfaction at work and stressful life events within 12 months before the onset of the presenting symptoms were the three postulated determinants which were significantly more among STs than PGs. Conclusion: The prevalence of somatised mental disorder was little higher than the psychologised mental disorder. The prevalence of somatisation and psychologisation is comparable with other reported studies from the Middle-East and Western countries. Dissatisfaction at work and stressful life events were significantly higher among STs than PGs

Antimicrobial resistance among migrants in Europe: a systematic review and meta-analysis

BACKGROUND: Rates of antimicrobial resistance (AMR) are rising globally and there is concern that increased migration is contributing to the burden of antibiotic resistance in Europe. However, the effect of migration on the burden of AMR in Europe has not yet been comprehensively examined. Therefore, we did a systematic review and meta-analysis to identify and synthesise data for AMR carriage or infection in migrants to Europe to examine differences in patterns of AMR across migrant groups and in different settings. METHODS: For this systematic review and meta-analysis, we searched MEDLINE, Embase, PubMed, and Scopus with no language restrictions from Jan 1, 2000, to Jan 18, 2017, for primary data from observational studies reporting antibacterial resistance in common bacterial pathogens among migrants to 21 European Union-15 and European Economic Area countries. To be eligible for inclusion, studies had to report data on carriage or infection with laboratory-confirmed antibiotic-resistant organisms in migrant populations. We extracted data from eligible studies and assessed quality using piloted, standardised forms. We did not examine drug resistance in tuberculosis and excluded articles solely reporting on this parameter. We also excluded articles in which migrant status was determined by ethnicity, country of birth of participants' parents, or was not defined, and articles in which data were not disaggregated by migrant status. Outcomes were carriage of or infection with antibiotic-resistant organisms. We used random-effects models to calculate the pooled prevalence of each outcome. The study protocol is registered with PROSPERO, number CRD42016043681. FINDINGS: We identified 2274 articles, of which 23 observational studies reporting on antibiotic resistance in 2319 migrants were included. The pooled prevalence of any AMR carriage or AMR infection in migrants was 25·4% (95% CI 19·1-31·8; I2 =98%), including meticillin-resistant Staphylococcus aureus (7·8%, 4·8-10·7; I2 =92%) and antibiotic-resistant Gram-negative bacteria (27·2%, 17·6-36·8; I2 =94%). The pooled prevalence of any AMR carriage or infection was higher in refugees and asylum seekers (33·0%, 18·3-47·6; I2 =98%) than in other migrant groups (6·6%, 1·8-11·3; I2 =92%). The pooled prevalence of antibiotic-resistant organisms was slightly higher in high-migrant community settings (33·1%, 11·1-55·1; I2 =96%) than in migrants in hospitals (24·3%, 16·1-32·6; I2 =98%). We did not find evidence of high rates of transmission of AMR from migrant to host populations. INTERPRETATION: Migrants are exposed to conditions favouring the emergence of drug resistance during transit and in host countries in Europe. Increased antibiotic resistance among refugees and asylum seekers and in high-migrant community settings (such as refugee camps and detention facilities) highlights the need for improved living conditions, access to health care, and initiatives to facilitate detection of and appropriate high-quality treatment for antibiotic-resistant infections during transit and in host countries. Protocols for the prevention and control of infection and for antibiotic surveillance need to be integrated in all aspects of health care, which should be accessible for all migrant groups, and should target determinants of AMR before, during, and after migration. FUNDING: UK National Institute for Health Research Imperial Biomedical Research Centre, Imperial College Healthcare Charity, the Wellcome Trust, and UK National Institute for Health Research Health Protection Research Unit in Healthcare-associated Infections and Antimictobial Resistance at Imperial College London

Evaluation of lymph node numbers for adequate staging of Stage II and III colon cancer

<p>Abstract</p> <p>Background</p> <p>Although evaluation of at least 12 lymph nodes (LNs) is recommended as the minimum number of nodes required for accurate staging of colon cancer patients, there is disagreement on what constitutes an adequate identification of such LNs.</p> <p>Methods</p> <p>To evaluate the minimum number of LNs for adequate staging of Stage II and III colon cancer, 490 patients were categorized into groups based on 1-6, 7-11, 12-19, and ≥ 20 LNs collected.</p> <p>Results</p> <p>For patients with Stage II or III disease, examination of 12 LNs was not significantly associated with recurrence or mortality. For Stage II (HR = 0.33; 95% CI, 0.12-0.91), but not for Stage III patients (HR = 1.59; 95% CI, 0.54-4.64), examination of ≥20 LNs was associated with a reduced risk of recurrence within 2 years. However, examination of ≥20 LNs had a 55% (Stage II, HR = 0.45; 95% CI, 0.23-0.87) and a 31% (Stage III, HR = 0.69; 95% CI, 0.38-1.26) decreased risk of mortality, respectively. For each six additional LNs examined from Stage III patients, there was a 19% increased probability of finding a positive LN (parameter estimate = 0.18510, p < 0.0001). For Stage II and III colon cancers, there was improved survival and a decreased risk of recurrence with an increased number of LNs examined, regardless of the cutoff-points. Examination of ≥7 or ≥12 LNs had similar outcomes, but there were significant outcome benefits at the ≥20 cutoff-point only for Stage II patients. For Stage III patients, examination of 6 additional LNs detected one additional positive LN.</p> <p>Conclusions</p> <p>Thus, the 12 LN cut-off point cannot be supported as requisite in determining adequate staging of colon cancer based on current data. However, a minimum of 6 LNs should be examined for adequate staging of Stage II and III colon cancer patients.</p

Synthesis of palm oil-based fatty methylhydrazide

Fatty methylydrazides (FMHs) have been successfully synthesized from palm oil. Glycerol was produced as a by-product. The synthesis was carried out by reflux palm oil with methylhydrazine in hexane. FMHs have been characterized using elemental analysis, Fourier transform infrared spectroscopy and 1H nuclear magnetic resonance technique. The results showed that a 6:1 molar ratio of palm oil to methylhydrazine, a round 78 % maximum conversion of palm oil into FMHs and a 10 h reaction time are the optimum reaction conditions