Recent changes in shelf hydrography in the Siberian Arctic : potential for subsea permafrost instability

Summer hydrographic data (1920–2009) show a dramatic warming of the bottom water layer over the eastern Siberian shelf coastal zone (<10 m depth), since the mid-1980s, by 2.1°C. We attribute this warming to changes in the Arctic atmosphere. The enhanced summer cyclonicity results in warmer air temperatures and a reduction in ice extent, mainly through thermodynamic melting. This leads to a lengthening of the summer open-water season and to more solar heating of the water column. The permafrost modeling indicates, however, that a significant change in the permafrost depth lags behind the imposed changes in surface temperature, and after 25 years of summer seafloor warming (as observed from 1985 to 2009), the upper boundary of permafrost deepens only by ∼1 m. Thus, the observed increase in temperature does not lead to a destabilization of methane-bearing subsea permafrost or to an increase in methane emission. The CH4 supersaturation, recently reported from the eastern Siberian shelf, is believed to be the result of the degradation of subsea permafrost that is due to the long-lasting warming initiated by permafrost submergence about 8000 years ago rather than from those triggered by recent Arctic climate changes. A significant degradation of subsea permafrost is expected to be detectable at the beginning of the next millennium. Until that time, the simulated permafrost table shows a deepening down to ∼70 m below the seafloor that is considered to be important for the stability of the subsea permafrost and the permafrost-related gas hydrate stability zone

The Development of Travel and Tourism Industry in Iran

The article presents the results of scientific research devoted to the study of tourism in the countries of the Far East, obtained at one of its stages. The purpose of the article is to characterize the state of rural tourism in Iran. The article shows how the attitude to tourism has changed in this country, uncovering the main reasons for the growth of domestic and international tourist flows in recent years. There are several areas of rural tourism in Iran, which include visits to historical villages and free trade zones, camping in nomad tents, recreation in parks and natural resorts, and trips to the desert. The main research findings of the authors demonstrate the problems facing rural tourism in Iran and identify the risks that arise in this sector of the economy

The \u3cem\u3eChlamydomonas\u3c/em\u3e Genome Reveals the Evolution of Key Animal and Plant Functions

Chlamydomonas reinhardtii is a unicellular green alga whose lineage diverged from land plants over 1 billion years ago. It is a model system for studying chloroplast-based photosynthesis, as well as the structure, assembly, and function of eukaryotic flagella (cilia), which were inherited from the common ancestor of plants and animals, but lost in land plants. We sequenced the ∼120-megabase nuclear genome of Chlamydomonas and performed comparative phylogenomic analyses, identifying genes encoding uncharacterized proteins that are likely associated with the function and biogenesis of chloroplasts or eukaryotic flagella. Analyses of the Chlamydomonas genome advance our understanding of the ancestral eukaryotic cell, reveal previously unknown genes associated with photosynthetic and flagellar functions, and establish links between ciliopathy and the composition and function of flagella

Centrality evolution of the charged-particle pseudorapidity density over a broad pseudorapidity range in Pb-Pb collisions at root s(NN)=2.76TeV

Peer reviewe

Ag-Nanowire Bundles with Gap Hot Spots Synthesized in Track-Etched Membranes as Effective SERS-Substrates

This paper presents a cost-effective approach for the template-assisted electrodeposition fabrication of substrates for surface-enhanced Raman scattering (SERS) with metal nanowires (NWs) grown in pores of polymer track-etched membranes (TM). This technique allows the synthesis of NWs array with its certain surface density and diameter (from dozen to hundreds of nm). NWs length also may be varied (order of μm) by controlling deposition time. Here we grow vertical Ag-NWs which are leaning towards their nearest neighbors, forming self-assembled bundles whose parameters depend on the NW aspect ratio (length to diameter). We show that in such bundles there are “hot spots” in the nm-gaps between NWs tips. Computer simulations have demonstrated a strong enhancement of the electric field within these hot spots; thus, the Raman signal is markedly amplified for analyte molecules placed directly inside the gaps. We have experimentally proved the potential of this SERS-technique on the example of 4-Mercaptophenylboronic acid (4-MPBA). For 4-MPBA the maximal enhancement of Raman signal was found at NWs length of ~1.6 μm and diameter of ~100 nm. The effect is higher (up to twice) if “wet” substrate is used just immediately after the TM polymer removal so that the tips are brought to lean after analyte exposure. We suggest this new type of nanostructured SERS-substrates as a base of effective sensing of extremely low concentration of analytes

Plasma Electrolytic Modification of Zirconium and Its Alloys: Brief Review

The review focuses on the surface modification of Zr and its alloys, which is necessary to expand the applications of these kinds of materials. Data on the properties of pure zirconium and its alloys are presented. Since surface engineering and the operation of the above materials are in most cases associated with the formation of oxide coatings, information on the characteristics of ZrO2 is given. In addition, attention is paid to phasing in the zirconium–oxygen system. It is noted that the most effective method of surface engineering of Zr and its alloys is plasma electrolytic modification (PEM) technology. Specific examples and modes of modification are described, and the reached results are analyzed. The relevance, novelty and originality of the review are determined by the insufficient knowledge about a number of practical features concerning the formation of functional oxide coatings on Zr and some of its alloys by the technology of PEM. In particular, the information on the phase composition and possibilities of stabilization of the tetragonal and cubic modifications of ZrO2, the effects of the component composition of electrolyte solutions and electrolyte suspensions, and the specifics of the treatment of additive shaping and deformed materials are rather contradictory. This review aims to collect recent advances and provide insights into the trends in the modification of Zr and its alloys, promote the formulation of practical recommendations and assess the development prospects

X-ray parabolic lenses made from glassy carbon by means of laser

Parabolic planar compound refractive lenses (CRLs) made from glassy carbon by means of laser ablation are presented. They have radii of curvatures of 5 and 200 mu m and geometric apertures of 40 and 900 mu m, respectively. The numbers of biconcave elements in the CRLs were 4, 7, and 200. The planar lenses allow formation of a linear focus of length comparable with the depths of their profiles. Usage of two CRLs in a crossed geometry provides formation of two-dimensional focus. The lenses were tested at the European Synchrotron Radiation Facility at the bending magnet beam line BM-5. The minimum experimental size of the focus has been achieved as 1.4 mu m

Structural and Electrocatalytic Properties of Platinum and Platinum-Carbon Layers Obtained by Magnetron-Ion Sputtering

This article is devoted to further development of magnetron sputtering technology for catalysts and catalysts layer production for fuel cells and other electrochemical devices. Platinum-carbon films with Pt content up to 95&#8315;97 wt % were deposited using different sputtering regimes&#8212;DC (direct current) sputtering with and without application of a pulse negative bias voltage to the titanium substrate and also bipolar pulse sputtering with frequency of 10 kHz and 100 kHz. Composite platinum carbon targets were used for sputtering. Characteristics of platinum-carbon films were compared with those of platinum films deposited using the same regimes. The main methods of investigation were scanning transmission electron microscopy (STEM) with energy dispersive X-ray spectroscopy; potentiostatic and potentiodynamic methods. The catalytic activity of platinum-carbon films increased with platinum content and at a platinum concentration of 95&#8315;97 wt % became higher than that of platinum films sputtered in the same regimes. It was proposed that carbon atoms deposited on the substrate limited the mobility of the deposited platinum species and inhibited Pt cluster growth. Platinum-carbon films produced by pulsed DC magnetron sputtering with pulsed frequency 100 kHz consisted of narrow Pt columns with dome nanotops forming a well-developed surface. The porosity and specific surface of these columnar nanopillar films were higher compared with those of pure platinum films deposited under the same conditions. Moreover, the platinum-carbon films deposited using a bipolar pulse regime with a frequency of 100 kHz had the highest specific surface, porosity (30%) and catalytic activity in hydrogen and oxygen evolution due to a high ion current density and reduced pulse duration which inhibited the growth of large platinum globules

Self-lubricating effect of WC/Y–TZP–Al2O3 hybrid ceramic–matrix composites with dispersed hadfield steel particles during high-speed sliding against an HSS disk

WC/Y-TZP-Al2O3 hybrid ceramic-matrix composites (CMCs) with dispersed Hadfield steel particles were sintered and then tested at sliding speeds in the range of 7-37 m/s and contact pressure 5 MPa. Fast and low-temperature sinter-forging allowed obtaining micron-sized WC grains, submicron-sized alumina-reinforced yttria partially stabilized polycrystalline tetragonal zirconia (Y-TZP-Al2O3), and evenly distributed Hadfield steel grains. Such a microstructure provided new hybrid characteristics combining high hardness with high fracture toughness and tribological adaptation. The CMCs demonstrated low friction and high wear resistance that were better than those demonstrated by other composite materials such as, for example, MAX-phase composites, zirconia-base ceramics, ZrB2-SiC ceramics, and metal matrix WC-(Fe-Mn-C) composites. These good tribological characteristics were obtained due to the in situ mechanochemical formation of iron tungstates FeWO4 and Fe2WO6 on the worn surfaces of composite samples. These mixed oxides were included in multilayer subsurface structures that provided the self-lubricating and self-healing effects in high-speed sliding because of their easy shear and quasi-viscous behavior