Uncertainty Reduction Via Parameter Design of A Fast Digital Integrator for Magnetic Field Measurement

At European Centre of Nuclear Research (CERN), within the new Large Hadron Collider (LHC) project, measurements of magnetic flux with uncertainty of 10 ppm at a few of decades of Hz for several minutes are required. With this aim, a new Fast Digital Integrator (FDI) has been developed in cooperation with University of Sannio, Italy [1]. This paper deals with the final design tuning for achieving target uncertainty by means of experimental statistical parameter design

Performance of the Room Temperature Systems for Magnetic Field Measurements of the LHC Superconducting Magnets

The LHC will be composed of 1232 horizontally curved, 15-meter long, superconducting dipole assemblies and 474 Short Straight Sections containing various types of quadrupoles. These magnets are manufactured by several European companies and half of them are currently produced. The field quality at room temperature is strictly monitored to guide and validate the assembly at different stages of the production in the industry. Dipoles and quadrupoles are measured with two different rotating coil systems. These âﾜmolesâ travel inside the 50 mm aperture and accurately measure the field and gradient strength integrated over the length, the field direction and high order harmonics. We describe here these two systems, their performance and the experience gained through the two first years of operation

A Fast Digital Integrator for Magnetic Field Measurements at CERN

A self-calibrating digital instrument for flux measurements on magnets for accelerators used in basic research on subnuclear particles is proposed. The instrument acquires voltage arising from rotating coils transducers with a theoretical resolution of 10 ppt and a maximum sampling frequency of 800 kS/s. Then, samples are integrated on-line and suitably processed in order to improve time resolution and flux accuracy. This allows the limits of state-of-the-art digital fluximeters, related mainly to newgeneration rotating coils, with trigger rate of 20 kHz and coils speed of 10 rps, to be overcome. The instrument has been prototyped at Magnetic Measurement and Testing (MTM) Group of European Laboratory for Nuclear Research (CERN), under a framework of cooperation with the University of Sannio. Details on hardware and firmware conception, as well as on experimental results of the instrument principle validation, and of the preliminary metrological characterization of the prototype, are provided

Error characterization and calibration of real-time magnetic field measurement systems

In synchrotrons at the European Organization for Nuclear Research (CERN), magnetic measurement systems known as B-trains measure the magnetic field in the main bending magnets in real-time, and transmit this signal for the control of the synchrotron’s RF accelerating cavities, magnet power converter and beam monitoring systems. This work presents an assessment of the capabilities and performance of the new FIRESTORM (Field In REal-time STreaming from Online Reference Magnets) system as part of the first phase of commissioning. A short summary of the architecture of the measurement system is provided first, followed by the definition of an error model which can be used to characterize random and systematic errors separately. We present a procedure for the metrological calibration and qualification of the B-trains, including an experimental evaluation of the different error sources for the four new systems being commissioned in the Proton Synchrotron Booster (PSB), Low Energy Ion Ring (LEIR), Proton Synchrotron (PS) and the Extra Low ENergy Antiproton (ELENA) ring. In particular, we discuss a method to calibrate systematic gain and offset errors based on the RF cavity frequency offset needed to center the beam on its theoretical orbit

A hall plate based instrument to measure the snapback in the Large Hadron Collider superconducting dipole magnets

The decay and snapback of the magnetic field multipoles in superconducting particle accelerators like the Large Hadron Collider (LHC) could result in a significant particle beam loss unless adequately compensated. Whilst standard instrumentation used to measure the field quality of the superconducting magnets is good enough to measure the harmonic decay, it is not fast enough to measure the snapback. Therefore, a state of the art instrument was recently developed at CERN to measure the most important harmonics with a high measurement frequency and hence improve the understanding of the snapback phenomenon. In this paper we describe the instrument's principle of operation, its mechanical arrangement, its compensation system and its digital acquisition system. We also compare the performance of two different techniques implemented to achieve the necessary measurement resolution of 6 orders of magnitude lower than the main superimposed dipole field.peer-reviewe

Potential for Methanosarcina to Contribute to Uranium Reduction during Acetate-Promoted Groundwater Bioremediation

Previous studies of acetate-promoted bioremediation of uranium-contaminated aquifers focused on Geobacter because no other microorganisms that can couple the oxidation of acetate with U(VI) reduction had been detected in situ. Monitoring the levels of methyl CoM reductase subunit A (mcrA) transcripts during an acetate-injection field experiment demonstrated that acetoclastic methanogens from the genus Methanosarcina were enriched after 40 days of acetate amendment. The increased abundance of Methanosarcina corresponded with an accumulation of methane in the groundwater. In order to determine whether Methanosarcina species could be participating in U(VI) reduction in the subsurface, cell suspensions of Methanosarcina barkeri were incubated in the presence of U(VI) with acetate provided as the electron donor. U(VI) was reduced by metabolically active M. barkeri cells; however, no U(VI) reduction was observed in inactive controls. These results demonstrate that Methanosarcina species could play an important role in the long-term bioremediation of uraniumcontaminated aquifers after depletion of Fe(III) oxides limits the growth of Geobacter species. The results also suggest that Methanosarcina have the potential to influence uranium geochemistry in a diversity of anaerobic sedimentary environments

Bacterial diversity in typical abandoned multi-contaminated nonferrous metal(loid) tailings during natural attenuation

This is the author accepted manuscript. The final version is available from Elsevier via the DOI in this recordAbandoned nonferrous metal(loid) tailings sites are anthropogenic, and represent unique and extreme ecological niches for microbial communities. Tailings contain elevated and toxic content of metal(loid)s that had negative effects on local human health and regional ecosystems. Microbial communities in these typical tailings undergoing natural attenuation are often very poorly examined. The diversity and inferred functions of bacterial communities were examined at seven nonferrous metal(loid) tailings sites in Guangxi (China), which were abandoned between 3 and 31 years ago. The acidity of the tailings sites rose over 31 years of site inactivity. Desulfurivibrio, which were always coupled with sulfur/sulfide oxidation to dissimilate the reduction of nitrate/nitrite, were specific in tailings with 3 years abandonment. However, genus beneficial to plant growth (Rhizobium), and iron/sulfur- oxidizing bacteria and metal(loid)-related genera (Acidiferrobacter and Acidithiobacillus) were specific within tailings abandoned for 23 years or more. The increased abundance of acid-generating iron/sulfur-oxidizing and metal(loid)-related bacteria and specific bacterial communities during the natural attenuation could provide new insights for understanding microbial ecosystem functioning in mine tailings. OTUs related to Sulfuriferula, Bacillus, Sulfurifustis, Gaiella, and Thiobacillus genera were the main contributors differentiating the bacterial communities between the different tailing sites. Multiple correlation analyses between bacterial communities and geochemical parameters indicated that pH, TOC, TN, As, Pb, and Cu were the main drivers influencing the bacterial community structures. PICRUSt functional exploration revealed that the main functions were related to DNA repair and recombination, important functions for bacterial adaptation to cope with the multi- contamination of tailings. Such information provides new insights to guide future metagenomic studies for the identification of key functions beyond metal- transformation/resistance. As well, our results offers novel outlooks for the management of bacterial communities during natural attenuation of multi-contaminated nonferrous metal(loid) tailings sites.International Key Project from National Natural Science Foundation of ChinaProjects of Natural Science Foundation of ChinaPublic welfare project of Chinese Ministry of Environmental Protectionnternational key project of Ministry of Science and Technology of ChinaS2016G2135Centre National de la Recherche ScientifiqueRoyal Society Newton Mobility GrantNational Natural Science Foundation International Joint collaboration China-Swede

Microbial ecology of arsenic-mobilizing Cambodian sediments: lithological controls uncovered by stable-isotope probing

Microbially mediated arsenic release from Holocene and Pleistocene Cambodian aquifer sediments was investigated using microcosm experiments and substrate amendments. In the Holocene sediment, the metabolically active bacteria, including arsenate-respiring bacteria, were determined by DNA stable-isotope probing. After incubation with 13C-acetate and 13C-lactate, active bacterial community in the Holocene sediment was dominated by different Geobacter spp.-related 16S rRNA sequences. Substrate addition also resulted in the enrichment of sequences related to the arsenate-respiring Sulfurospirillum spp. 13C-acetate selected for ArrA related to Geobacter spp. whereas 13C-lactate selected for ArrA which were not closely related to any cultivated organism. Incubation of the Pleistocene sediment with lactate favoured a 16S rRNA-phylotype related to the sulphate-reducing Desulfovibrio oxamicus DSM1925, whereas the ArrA sequences clustered with environmental sequences distinct from those identified in the Holocene sediment. Whereas limited As(III) release was observed in Pleistocene sediment after lactate addition, no arsenic mobilization occurred from Holocene sediments, probably because of the initial reduced state of As, as determined by X-ray Absorption Near Edge Structure. Our findings demonstrate that in the presence of reactive organic carbon, As(III) mobilization can occur in Pleistocene sediments, having implications for future strategies that aim to reduce arsenic contamination in drinking waters by using aquifers containing Pleistocene sediments