CRIMINAL AND CRIMINAL NATURE OF BRIBERY

Bribery is one form of corruption. It is a socio-political problem that has a devastating effect on public administration and on the development of society. The aim of the work is to provide a concept of bribery, criminal and criminal characterization. To look at the problems and specificities of the bribery qualification by studying the current trends of the case-law. Research methods have been used in the work - analysis and comparison of Latvian and foreign literature. Analysis of investigations and case-law. By making their generalisations and conclusions

Sprinting Toward Fitness.

Intense intermittent exercise, or interval training, is a powerful stimulus to induce many of the physiological adaptations typically associated with traditional, moderate-intensity continuous training. While coaches and athletes have recognized the value of interval training to enhance performance for over a century, recent scientific interest has focused on the application of this training method for health promotion. Despite renewed attention, the mechanistic basis for the physiological remodeling that occurs after interval training and the role that the stochastic nature of this type of exercise plays in mediating adaptive responses remains to be elucidated

Prospects for Ductility and Toughness Enhancement of Nial by Ductile Phase Reinforcement

The use of NiAl as a structural material has been hindered by the fact that this ordered intermetallic does not exhibit significant tensile ductility or toughness at room temperature. A critical review of the operative flow and fracture mechanisms in monolithic NiAl has thus established the need for ductile phase toughening in this order system. Progress in ductile phase reinforced intermetallic systems in general and specifically NiAl-based materials has been reviewed. In addition, further clarification of the primary mechanisms involved in the flow and fracture of ductile phase reinforced alloys has evolved from ongoing investigations of several model NiAl-based materials. The mechanical behavior of these model directionally-solidified alloys (Ni-30Al and Ni-30Fe-20Al) are discussed. Finally, the prospects for developing a ductile phase toughened NiAl-based alloy and the shortcomings presently inherent in these systems are analyzed

Dislocation-solute atom interactions in alloys. Technical progress report, February 1, 1975--January 31, 1976

New results were obtained in two major project areas: (1) surface oxide softening and solute gradients in niobium and tantalum, and (2) mechanical properties of Nb--H and Nb--D alloys. The important results include: (a) observation and characterization of an extremely large softening and ductilizing effect of bcc metals (niobium and tantalum) by application of thin (500 to 1000 A) oxide films coupled with injection of a high density of mobile dislocations; (b) determination of the relative strengthening ductility changes caused by hydrogen and deuterium in niobium. (auth

Simple Bodyweight Training Improves Cardiorespiratory Fitness With Minimal Time Commitment: A Contemporary Application of the 5BX Approach

International Journal of Exercise Science 14(3): 93-100, 2021. Bodyweight training (BWT) is a style of interval exercise based on classic principles of physical education. Limited research, however, has examined the efficacy of BWT on cardiorespiratory fitness. This is especially true for simple BWT protocols that do not require extraordinarily high levels of effort. We examined the effect of a BWT protocol, modelled after the original “Five Basic Exercises” (5BX) plan, on peak oxygen uptake (VO2peak) in healthy, inactive adults (20 ± 1 y; body mass index: 20 ± 5 kg/m2; mean ± SD). Participants were randomized to a training group that performed 18 sessions over six weeks (n=9), or a non-training control group (n = 10). The 11-minute session involved five exercises (burpees, high knees, split squat jumps, high knees, squat jumps), each performed for 60-seconds at a self-selected “challenging” pace, interspersed with active recovery periods (walking). Mean intensity during training was 82 ± 5% of maximal heart rate, rating of perceived exertion was 14 ± 3 out of 20, and compliance was 100%. ANCOVA revealed a significant difference between groups after the intervention, such that VO2peak was higher in the training group compared to control (34.2 ± 6.4 vs 30.3 ± 11.1 ml/kg/min; p = 0.03). Peak power output during the VO2peak test was also higher after training compared to control (211 ± 43 vs 191 ±50 W, p = 0.004). There were no changes in leg muscular endurance, handgrip strength or vertical jump height in either group. We conclude that simple BWT— requiring minimal time commitment and no specialized equipment — can enhance cardiorespiratory fitness in inactive adults. These findings have relevance for individuals seeking practical, time-efficient approaches to exercise

Application of Advanced Information and Communication Technologies in a Local Flood Warning System

This paper deals with the practical application of a local flood warning system. The system is built on the mathematical model of a selected area. The rainfall-runoff processes are simulated in real-time. The warning system is designed as an on-line, real-time data inputs-processing system so that it can provide a timely warning. The warning system is based on a mathematical model and it uses modern information and communication technology tools. For the system to work properly, it is absolutely necessary to adhere to a real mathematical model, and therefore a calibration on real historical data and direct measurements is required. This article describes the tasks of data collection, of building the mathematical model of the rainfall-runoff process, and the monitoring system design. The composed algorithm is able, based on the measured input data and the modeled situation, send a notification message to the monitoring centre and warn respective civil protection authorities via SMS messages

The Importance of Winter Dinoflagellate Blooms in Chesapeake Bay—a Missing Link in Bay Productivity

It is widely assumed that phytoplankton abundance and productivity decline during temperate winters because of low irradiance and temperatures. However, winter phytoplankton blooms commonly occur in temperate estuaries, but they are often undocumented because of reduced water quality monitoring in winter. The small body of in situ work that has been done on winter blooms suggests they can be of enormous consequence to ecosystems. However, because monitoring is often reduced or stopped altogether during winter, it is unclear how widespread these blooms are or how long they can last. We analyzed an over 30-year record of monthly phytoplankton monitoring samples along with ad hoc sampling throughout Chesapeake Bay to assess the distributions of two common winter bloom species, Heterocapsa rotundata and Heterocapsa steinii, and the environmental conditions associated with these blooms. The long-term monitoring data revealed that H. rotundata blooms occur within a narrow salinity range (7–12) and potentially have different triggers depending upon the nutrient status of waters affected. The ad hoc sampling confirmed the occurrence of H. steinii blooms in the lower Chesapeake Bay, despite the lack of evidence for them from monthly monitoring data. Together, our findings demonstrate that winter blooms routinely occur in numerous locations throughout Chesapeake Bay and can last up to a month. Our findings suggest that while winter blooms are a staple of the Bay’s annual phytoplankton community, there are major data gaps reporting their occurrence highlighting the need for more frequent monitoring to understand factors promoting these blooms and their consequences on ecosystem productivity

Stress asymmetry in cyclic deformation of b.c.c. metals

Asymmetric slip in b.c.c. metals is related to both the symmetry about screw dislocations and elastic anisotropy. The elastic anisotropy differs quite substantially from one b.c.c. metal to the next and this anisotropy has been observed in measurements of asymmetric stresses in plastic deformation experiments. In this paper, data from cyclic deformation of b.c.c. metals, with special emphasis on tungsten which is elastically isotropic, are used to demonstrate the role of screw dislocation geometry and elastic anisotropy on stress asymmetry. The interaction of dislocation geometry and thermal activation of screw dislocation motion is discussed.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/30320/1/0000722.pd

Matching energy intake to expenditure of isocaloric exercise at high- and moderate-intensities

Background Those seeking to manage their bodyweight use a variety of strategies, but the most common approaches involve attempting to exercise more and/or consume fewer calories. A poor comprehension of the energy cost of exercise and the energy content of food may contribute to weight-gain and the poor success rate of exercise weight-loss interventions. Purpose The purpose of this study is to investigate individuals' ability to consciously match energy intake with energy expenditure after isocaloric exercise at moderate and high intensities. Method In a counterbalanced cross-over study design, 14 low- to moderately-active, lean individuals (7 male, 7 female; mean age 23 ± 3 years; mean BMI 22.0 ± 3.2 kg·m− 2) completed both a moderate-intensity (60% VO2max, MOD) and a high-intensity (90% VO2max, HIGH) exercise bout on a treadmill, matched for energy expenditure, EE (450 kcal). Participants were blinded to the intensity and duration of each bout. Thirty minutes post-exercise, participants were presented with a buffet, where they were asked to consume food in an attempt to match energy intake with the energy expended during the exercise bout. This was termed the “matching task,” providing a matching task energy intake value (EIMATCH). Upon finishing the matching task, a verbal estimate of energy expenditure (EST) was obtained before the participant was allowed to return to the buffet to consume any more food, if desired. This intake was covertly measured and added to EIMATCH to obtain an ad libitum intake value (EIAD LIB). Results A significant condition × task interaction showed that, in MOD, EST was significantly lower than EE (298 ± 156 kcal vs. 443 ± 22 kcal, p = 0.01). In the HIGH condition, EE, EIMATCH and EST were similar. In both conditions, participants tended to over-eat to a similar degree, relative to EST, with EIMATCH 20% and 22% greater than EST in MOD and HIGH respectively. Between-condition comparisons demonstrated that EIMATCH and EST were significantly lower in MOD, compared with HIGH (374 ± 220 kcal vs. 530 ± 248 kcal, p = 0.002 and 298 ± 156 kcal vs. 431 ± 129 kcal, p = 0.002 respectively). For both conditions, EIAD LIB was approximately 2-fold greater than EE. Discussion Participants exhibited a strong ability to estimate exercise energy expenditure after high-intensity exercise. Participants appeared to perceive moderate-intensity exercise to be less energetic than an isocaloric bout of high-intensity exercise. This may have implications for exercise recommendations for weight-loss strategies, especially when casual approaches to exercise and attempting to eat less are being implemented