Experimental studies and mathematical modelling of Inconel 600 with CVD coated TiN/TiCN/Al2O3/ZrCN inserts under dry machining Conditions

Inconel 600 is a nickel-based super alloy with applications in the field of Aerospace, Nuclear energy, Heat treatment, and chemical processing industries, and is a difficult to cut material due to its high hot hardness and strength. Coated carbide inserts can improve the machinability of alloys like Inconel 600 and other super alloys. This work is about the machinability characteristics study on Inconel 600 alloy under dry turning environment with high speed machining using CVD coated TiN/TiCN/Al2O3/ZrCN cutting tool insert. Cutting speed (200, 250, and 300 m/min), feed rate (0.05, 0.1, 0.15 mm/rev), and back rake angle (-7, -5, -3°) are considered as machining process parameters. Full factorial design of experiments were performed to evaluate the performance of process parameters on surface roughness and material removal rate. It was found that surface roughness decreased with increase in cutting speed and increases with increase in feed rate. Surface roughness increases with increase in rake angle in negative direction. Material removal rate increases with increase in both cutting speed and the feed rate whereas rake angle had minimal influence. Mathematical modelling was done on the obtained results and found that Rˆ2 value for surface roughness and material removal rate were 99.14% and 98.69% respectively. Analysis of Variance on surface roughness found that feed rate* feed rate is the most influencing parameter with maximum contribution of 34.16% whereas feed rate* cutting speed parameter has maximum influence on material removal rate with contribution of 83.03 %

Peristaltic flow and hydrodynamic dispersion of a reactive micropolar fluid-simulation of chemical effects in the digestive process

The hydrodynamic dispersion of a solute in peristaltic flow of a reactive incompressible micropolar biofluid is studied as a model of chyme transport in the human intestinal system with wall effects. The long wavelength approximation, Taylor's limiting condition and dynamic boundary conditions at the flexible walls are used to obtain the average effective dispersion coefficient in the presence of combined homogeneous and heterogeneous chemical reactions. The effects of various pertinent parameters on the effective dispersion coefficient are discussed. It is observed that average effective dispersion coefficient increases with amplitude ratio which implies that dispersion is enhanced in the presence of peristalsis. Furthermore average effective dispersion coefficient is also elevated with the micropolar rheological and wall parameters. Conversely dispersion is found to decrease with cross viscosity coefficient, homogeneous and heterogeneous chemical reaction rates. The present simulations provide an important benchmark for future chemo-fluid-structure interaction computational models

Evaluation of black carbon emission inventories using a Lagrangian dispersion model - a case study over southern India

We evaluated three emission inventories of black carbon (BC) using Lagrangian particle dispersion model simulations and BC observations from a rural site in southern India (Gadanki; 13.48 degrees N, 79.18 degrees E) from 2008 to 2012. We found that 93 to 95% of the BC load at the observation site originated from emissions in India and the rest from the neighbouring countries and shipping. A substantial fraction (33 to 43%) of the BC was transported from northern India. Wet deposition is found to play a minor role in reducing BC mass at the site because of its proximity to BC sources during rainy season and relatively short rainy season over western and northern parts of India. Seasonally, the highest BC concentration (approx. 3.3 ug m^-3) is observed during winter, followed by spring (approx. 2.8 ug m^-3). While the model reproduced well the seasonal cycle, the modelled BC concentrations are significantly lower than observed values, especially in spring. The model bias is correlated to fire radiative power - a proxy of open biomass burning activity. Using potential emission sensitivity maps derived using the model, we suggest that underestimation of BC mass in the model during spring is due to the underestimation of BC fluxes over southern India (possibly from open-biomass-burning/forest-fires). The overall performance of the model simulations using three different emission inventories (SAFAR-India, ECLIPSE and RETRO) is similar, with ECLIPSE and SAFAR-India performing marginally better as both have about 30% higher emissions for India than RETRO. The ratio of observed to modelled annual mean BC conentration was estimated as 1.5 for SAFAR, 1.7 for ECLIPSE and 2.4 for RETRO

Swimming dynamics of a micro-organism in a couple stress fluid : a rheological model of embryological hydrodynamic propulsion

Mathematical simulations of embryological fluid dynamics are fundamental to improving clinical understanding of the intricate mechanisms underlying sperm locomotion. The strongly rheological nature of reproductive fluids has been established for a number of decades. Complimentary to clinical studies, mathematical models of reproductive hydrodynamics provide a deeper understanding of the intricate mechanisms involved in spermatozoa locomotion which can be of immense benefit in clarifying fertilization processes. Although numerous non-Newtonian studies of spermatozoa swimming dynamics in non-Newtonian media have been communicated, very few have addressed the micro-structural characteristics of embryological media. This family of micro-continuum models include Eringen’s micro-stretch theory, Eringen’s microfluid and micropolar constructs and V.K. Stokes’ couple-stress fluid model, all developed in the 1960s. In the present paper we implement the last of these models to examine the problem of micro-organism (spermatozoa) swimming at low Reynolds number in a homogenous embryological fluid medium with couple stress effects. The micro-organism is modeled as with Taylor’s classical approach, as an infinite flexible sheet on whose surface waves of lateral displacement are propagated. The swimming speed of the sheet and rate of work done by it are determined as function of the parameters of orbit and the couple stress fluid parameter (α). The perturbation solutions are validated with a Nakamura finite difference algorithm. The perturbation solutions reveal that the normal beat pattern is effective for both couple stress and Newtonian fluids only when the amplitude of stretching wave is small. The swimming speed is observed to decrease with couple stress fluid parameter tending to its Newtonian limit as alpha tends to infinity. However the rate of work done by the sheet decreases with α and approaches asymptotically to its Newtonian value. The present solutions also provide a good benchmark for more advanced numerical simulations of micro-organism swimming in couple-stress rheological biofluids

Dynamic circadian protein-protein interaction networks predict temporal organization of cellular functions.

Essentially all biological processes depend on protein-protein interactions (PPIs). Timing of such interactions is crucial for regulatory function. Although circadian (~24-hour) clocks constitute fundamental cellular timing mechanisms regulating important physiological processes, PPI dynamics on this timescale are largely unknown. Here, we identified 109 novel PPIs among circadian clock proteins via a yeast-two-hybrid approach. Among them, the interaction of protein phosphatase 1 and CLOCK/BMAL1 was found to result in BMAL1 destabilization. We constructed a dynamic circadian PPI network predicting the PPI timing using circadian expression data. Systematic circadian phenotyping (RNAi and overexpression) suggests a crucial role for components involved in dynamic interactions. Systems analysis of a global dynamic network in liver revealed that interacting proteins are expressed at similar times likely to restrict regulatory interactions to specific phases. Moreover, we predict that circadian PPIs dynamically connect many important cellular processes (signal transduction, cell cycle, etc.) contributing to temporal organization of cellular physiology in an unprecedented manner

Antimicrobial resistance among migrants in Europe: a systematic review and meta-analysis

BACKGROUND: Rates of antimicrobial resistance (AMR) are rising globally and there is concern that increased migration is contributing to the burden of antibiotic resistance in Europe. However, the effect of migration on the burden of AMR in Europe has not yet been comprehensively examined. Therefore, we did a systematic review and meta-analysis to identify and synthesise data for AMR carriage or infection in migrants to Europe to examine differences in patterns of AMR across migrant groups and in different settings. METHODS: For this systematic review and meta-analysis, we searched MEDLINE, Embase, PubMed, and Scopus with no language restrictions from Jan 1, 2000, to Jan 18, 2017, for primary data from observational studies reporting antibacterial resistance in common bacterial pathogens among migrants to 21 European Union-15 and European Economic Area countries. To be eligible for inclusion, studies had to report data on carriage or infection with laboratory-confirmed antibiotic-resistant organisms in migrant populations. We extracted data from eligible studies and assessed quality using piloted, standardised forms. We did not examine drug resistance in tuberculosis and excluded articles solely reporting on this parameter. We also excluded articles in which migrant status was determined by ethnicity, country of birth of participants' parents, or was not defined, and articles in which data were not disaggregated by migrant status. Outcomes were carriage of or infection with antibiotic-resistant organisms. We used random-effects models to calculate the pooled prevalence of each outcome. The study protocol is registered with PROSPERO, number CRD42016043681. FINDINGS: We identified 2274 articles, of which 23 observational studies reporting on antibiotic resistance in 2319 migrants were included. The pooled prevalence of any AMR carriage or AMR infection in migrants was 25·4% (95% CI 19·1-31·8; I2 =98%), including meticillin-resistant Staphylococcus aureus (7·8%, 4·8-10·7; I2 =92%) and antibiotic-resistant Gram-negative bacteria (27·2%, 17·6-36·8; I2 =94%). The pooled prevalence of any AMR carriage or infection was higher in refugees and asylum seekers (33·0%, 18·3-47·6; I2 =98%) than in other migrant groups (6·6%, 1·8-11·3; I2 =92%). The pooled prevalence of antibiotic-resistant organisms was slightly higher in high-migrant community settings (33·1%, 11·1-55·1; I2 =96%) than in migrants in hospitals (24·3%, 16·1-32·6; I2 =98%). We did not find evidence of high rates of transmission of AMR from migrant to host populations. INTERPRETATION: Migrants are exposed to conditions favouring the emergence of drug resistance during transit and in host countries in Europe. Increased antibiotic resistance among refugees and asylum seekers and in high-migrant community settings (such as refugee camps and detention facilities) highlights the need for improved living conditions, access to health care, and initiatives to facilitate detection of and appropriate high-quality treatment for antibiotic-resistant infections during transit and in host countries. Protocols for the prevention and control of infection and for antibiotic surveillance need to be integrated in all aspects of health care, which should be accessible for all migrant groups, and should target determinants of AMR before, during, and after migration. FUNDING: UK National Institute for Health Research Imperial Biomedical Research Centre, Imperial College Healthcare Charity, the Wellcome Trust, and UK National Institute for Health Research Health Protection Research Unit in Healthcare-associated Infections and Antimictobial Resistance at Imperial College London