255 research outputs found
A Codazzi-like equation and the singular set for smooth surfaces in the Heisenberg group
In this paper, we study the structure of the singular set for a
smooth surface in the -dimensional Heisenberg group . We
discover a Codazzi-like equation for the -area element along the
characteristic curves on the surface. Information obtained from this ordinary
differential equation helps us to analyze the local configuration of the
singular set and the characteristic curves. In particular, we can estimate the
size and obtain the regularity of the singular set. We understand the global
structure of the singular set through a Hopf-type index theorem. We also
justify that Codazzi-like equation by proving a fundamental theorem for local
surfaces in .Comment: 64 pages, 17 figure
Evaluation of Pd-Cr Wires for Strain Gage Application
A newly developed alloy, palladium-13 weight percent chromium (Pd13Cr), was identified by United Technologies Research Center under a NASA contract to be the best material for high temperature strain gage applications. An electrical resistance strain gage that can provide accurate static strain measurement to a temperature higher than that of a commercially available gage is urgently needed in aerospace and aeronautics research. A strain gage made of a 25.4 micron (1 mil) diameter Pd13Cr wire has been recently demonstrated to be usable for static strain measurements to 800 C. This compares to the 400 C temperature limit of the commercially available strain gages. The performance of the Pd-Cr gage, however, strongly depends on the quality of the Pd13Cr wire. Four batches of Pd-Cr wires purchased from three different manufacturers were therefore evaluated to determine the best source of the wire for strain gage applications. The three suppliers were Precious Metal Institute in China, Sigmund Cohn Co., and G & S Titanium, Inc. in the United States. Two batches of wires obtained from Previous Metal Institute in 1987 and 1992, respectively are referred to herein as China87 and China92 wires. The mechanical, chemical and electrical properties of these wires, both as-received and after high temperature exposures at 800 C for 50 hours were analyzed. The elastic modulus and the failure strength of the wires were evaluated using a tensile test machine equipped with a laser speckle strain measurement system. The chemical and microstructural properties of the wires were inspected using a plasma atomic emission spectrometer and a scanning electron microscope (SEM) equipped with an energy dispersive X-ray spectroscope (EDS). The electrical stability and repeatability of the wires were determined by measuring the electrical resistance of the wires during three thermal cycles to 1000 C and a ten-hour soak at 1000 C. As a result of this study, the wire which has the highest strength, the least impurities content, the best oxidation resistance and the best electrical stability will be selected for upcoming strain gage applications
Hysteresis and the dynamic phase transition in thin ferromagnetic films
Hysteresis and the non-equilibrium dynamic phase transition in thin magnetic
films subject to an oscillatory external field have been studied by Monte Carlo
simulation. The model under investigation is a classical Heisenberg spin system
with a bilinear exchange anisotropy in a planar thin film geometry with
competing surface fields. The film exhibits a non-equilibrium phase transition
between dynamically ordered and dynamically disordered phases characterized by
a critical temperature Tcd, whose location of is determined by the amplitude H0
and frequency w of the applied oscillatory field. In the presence of competing
surface fields the critical temperature of the ferromagnetic-paramagnetic
transition for the film is suppressed from the bulk system value, Tc, to the
interface localization-delocalization temperature Tci. The simulations show
that in general Tcd < Tci for the model film. The profile of the time-dependent
layer magnetization across the film shows that the dynamically ordered and
dynamically disordered phases coexist within the film for T < Tcd. In the
presence of competing surface fields, the dynamically ordered phase is
localized at one surface of the film.Comment: PDF file, 21 pages including 8 figure pages; added references,typos
added; to be published in PR
Packaging Technology Developed for High-Temperature SiC Sensors and Electronics
A ceramic- and thick-film-materials-based prototype electronic package designed for silicon carbide (SiC) high-temperature sensors and electronics has been successfully tested at 500 C in an oxygen-containing air environment for 500 hours. This package was designed, fabricated, assembled, and electronically evaluated at the NASA Glenn Research Center at Lewis Field with an in-house-fabricated SiC semiconductor test chip. High-temperature electronics and sensors are necessary for harsh-environment space and aeronautical applications, such as space missions to the inner solar system or the emission control electronics and sensors in aeronautical engines. Single-crystal SiC has such excellent physical and chemical material properties that SiC-based semiconductor electronics can operate at temperatures over 600 C, which is significantly higher than the limit for Si-based semiconductor devices. SiC semiconductor chips were recently demonstrated to be operable at temperatures as high as 600 C, but only in the probe station environment because suitable packaging technology for sensors and electronics at temperatures of 500 C and beyond did not exist. Thus, packaging technology for SiC-based sensors and electronics is immediately needed for both application and commercialization of high-temperature SiC sensors and electronics. In response to this need, researchers at Glenn designed, fabricated, and assembled a prototype electronic package for high-temperature electronics, sensors, and microelectromechanical systems (MEMS) using aluminum nitride (AlN) substrate and gold (Au) thick-film materials. This prototype package successfully survived a soak test at 500 C in air for 500 hours. Packaging components tested included thick-film high-temperature metallization, internal wire bonds, external lead bonds, and a SiC diode chip die-attachment. Each test loop, which was composed of thick-film printed wire, wire bond, and lead bond was subjected to a 50-mA direct current for 250 hours at 500 C
The Utility of the Abstract Relational Model and Attribute Paths in SQL
It is well-known that querying information is difficult for domain experts, for they are not familiar with querying actual relational schemata due to the notions of primary and foreign keys and the various ways of representing and storing information in a relational database. To overcome these problems, the Abstract Relational Model and the query language, SQLP, have been proposed. They are the theoretical foundations and ensure that explicit primary and foreign keys are hidden from the user's view and that queries can be expressed more compactly. In this paper we evaluate these theoretical advantages with user studies that compare SQLP to plain SQL as the baseline. The experiments show significant statistical evidence that SQLP indeed requires less time for understanding and authoring queries, with no loss in accuracy. Considering the positive results, we develop a method to reverse engineer legacy relational schemata into abstract relational ones
Lack of complex I is associated with oncocytic thyroid tumours
Oncocytic tumours are characterised by hyperproliferation of mitochondria. We immunohistochemically analysed all enzymes of the oxidative phosphorylation system in 19 oncocytic thyroid tumours. A specific lack of complex I was detected, which was expressed at <5% of the level determined in surrounding non-cancerous tissue
Dynamic phase transitions in thin ferromagnetic films
Monte Carlo simulations have been used to investigate the dynamic phase
behavior of a classical Heisenberg spin system with a bilinear exchange
anisotropy in a planar thin film geometry. Studies of the field amplitude,
frequency and temperature dependence show dynamic phase transitions in films
subject to a pulsed oscillatory external field. Thin films with competing
surface fields show separate and distinct dynamic phase transitions for the
bulk and surface layers of the film. Between the two transitions, a mixed state
with coexisting dynamically ordered and dynamically disordered phases is
observed in the film. In contrast, the free film with no surface fields shows a
single dynamic phase transition as in a bulk system.Comment: 25 pages including figures in pdf format, to be published in PR
Risk factors for fatal candidemia caused by Candida albicans and non-albicans Candida species
BACKGROUND: Invasive fungal infections, such as candidemia, caused by Candida species have been increasing. Candidemia is not only associated with a high mortality (30% to 40%) but also extends the length of hospital stay and increases the costs of medical care. Sepsis caused by Candida species is clinically indistinguishable from bacterial infections. Although, the clinical presentations of the patients with candidemia caused by Candida albicans and non-albicans Candida species (NAC) are indistinguishable, the susceptibilities to antifungal agents of these species are different. In this study, we attempted to identify the risk factors for candidemia caused by C. albicans and NAC in the hope that this may guide initial empiric therapy. METHODS: A retrospective chart review was conducted during 1996 to 1999 at the Veterans General Hospital-Taipei. RESULTS: There were 130 fatal cases of candidemia, including 68 patients with C. albicans and 62 with NAC. Candidemia was the most likely cause of death in 55 of the 130 patients (42.3 %). There was no significant difference in the distribution of Candida species between those died of candidemia and those died of underlying conditions. Patients who had one of the following conditions were more likely to have C. albicans, age ≧ 65 years, immunosuppression accounted to prior use of steroids, leukocytosis, in the intensive care unit (ICU), and intravascular and urinary catheters. Patients who had undergone cancer chemotherapy often appeared less critically ill and were more likely to have NAC. CONCLUSION: Clinical and epidemiological differences in the risk factors between candidemia caused by C. albicans and NAC may provide helpful clues to initiate empiric therapy for patients infected with C. albicans versus NAC
Choice of the Sampling Interval for the Identification of Continuous-time Systems from Samples of Input/output Data
Conclusions An indirect method of parameter estimation for continuous-time systems from sampled input/output data has been described. Firstly, the ARMA model of the system is identified from the sampled data. Then the order of the reduced model is determined by the dispersion analysis. Finally, the continuous model is obtained by matching the frequency responses of the discrete-time model and the continuous-time model. The proposed estimation procedures have been applied to a power system stabilizer, and satisfactory results are obtained. Acknowledgment This work was supported by the Taipower Company. Reference
Antimicrobial resistance among migrants in Europe: a systematic review and meta-analysis
BACKGROUND: Rates of antimicrobial resistance (AMR) are rising globally and there is concern that increased migration is contributing to the burden of antibiotic resistance in Europe. However, the effect of migration on the burden of AMR in Europe has not yet been comprehensively examined. Therefore, we did a systematic review and meta-analysis to identify and synthesise data for AMR carriage or infection in migrants to Europe to examine differences in patterns of AMR across migrant groups and in different settings. METHODS: For this systematic review and meta-analysis, we searched MEDLINE, Embase, PubMed, and Scopus with no language restrictions from Jan 1, 2000, to Jan 18, 2017, for primary data from observational studies reporting antibacterial resistance in common bacterial pathogens among migrants to 21 European Union-15 and European Economic Area countries. To be eligible for inclusion, studies had to report data on carriage or infection with laboratory-confirmed antibiotic-resistant organisms in migrant populations. We extracted data from eligible studies and assessed quality using piloted, standardised forms. We did not examine drug resistance in tuberculosis and excluded articles solely reporting on this parameter. We also excluded articles in which migrant status was determined by ethnicity, country of birth of participants' parents, or was not defined, and articles in which data were not disaggregated by migrant status. Outcomes were carriage of or infection with antibiotic-resistant organisms. We used random-effects models to calculate the pooled prevalence of each outcome. The study protocol is registered with PROSPERO, number CRD42016043681. FINDINGS: We identified 2274 articles, of which 23 observational studies reporting on antibiotic resistance in 2319 migrants were included. The pooled prevalence of any AMR carriage or AMR infection in migrants was 25·4% (95% CI 19·1-31·8; I2 =98%), including meticillin-resistant Staphylococcus aureus (7·8%, 4·8-10·7; I2 =92%) and antibiotic-resistant Gram-negative bacteria (27·2%, 17·6-36·8; I2 =94%). The pooled prevalence of any AMR carriage or infection was higher in refugees and asylum seekers (33·0%, 18·3-47·6; I2 =98%) than in other migrant groups (6·6%, 1·8-11·3; I2 =92%). The pooled prevalence of antibiotic-resistant organisms was slightly higher in high-migrant community settings (33·1%, 11·1-55·1; I2 =96%) than in migrants in hospitals (24·3%, 16·1-32·6; I2 =98%). We did not find evidence of high rates of transmission of AMR from migrant to host populations. INTERPRETATION: Migrants are exposed to conditions favouring the emergence of drug resistance during transit and in host countries in Europe. Increased antibiotic resistance among refugees and asylum seekers and in high-migrant community settings (such as refugee camps and detention facilities) highlights the need for improved living conditions, access to health care, and initiatives to facilitate detection of and appropriate high-quality treatment for antibiotic-resistant infections during transit and in host countries. Protocols for the prevention and control of infection and for antibiotic surveillance need to be integrated in all aspects of health care, which should be accessible for all migrant groups, and should target determinants of AMR before, during, and after migration. FUNDING: UK National Institute for Health Research Imperial Biomedical Research Centre, Imperial College Healthcare Charity, the Wellcome Trust, and UK National Institute for Health Research Health Protection Research Unit in Healthcare-associated Infections and Antimictobial Resistance at Imperial College London
- …