The origin of chemical inhomogeneity in garnet electrolytes and its impact on the electrochemical performance

The interface between solid electrolytes and lithium metal electrodes determines the performance of an all-solid-state battery in terms of the ability to demand high power densities and prevent the formation of lithium dendrites. This interface depends strongly on the nature of the solid electrolyte surface in contact with the metallic anode. In the garnet electrolyte/Li system, most papers have focused on the role of current inhomogeneities induced by void formation in the Li metal electrode and the presence of insulating reaction layers following air exposure. However, extended defects in the solid electrolyte induced by chemical and/or structural inhomogeneities can also lead to uneven current distribution, impacting the performance of these systems. In this work, we use complementary surface analysis techniques with varying analysis depths to probe chemical distribution within grains and grain boundaries at the surface and in the bulk of garnet-type electrolytes to explain their electrochemical performance. We show that morphology, post-treatments and storage conditions can greatly affect the surface chemical distribution of grains and grain boundaries. These properties are important to understand since they will dictate the ionic and electronic transport near the interfacial zone between metal and electrolyte which is key to determining chemo-mechanical stability

Thickness dependant characterization of chemically exfoliated TiS2 nanosheets

Monolayer TiS2 is the lightest member of the transition metal dichalcogenides family with promising application in energy storage and conversion systems. Use of TiS2 has been limited by the lack of rapid characterisation of layer number via Raman spectroscopy and its easy oxidation in wet environment. Here, we demonstrate layer number dependent Raman modes for TiS2. 1T-TiS2 presents two characteristics Raman active modes, A1g (out-of-plane) and Eg (in-plane). We identified a characteristic peak frequency shift of the Eg mode with the layer number and an unexplored Raman mode at 372 cm-1 whose intensity changes relative to the A1g mode with the thickness of TiS2 sheets. These two characteristic features of the Raman spectra allow the determination of layer numbers between 1 and 5 in exfoliated TiS2. Further, we develop a method to produce oxidation-resistant inks of micron sized mono- and few-layered TiS2 nanosheets at concentrations up to 1 mg/mL .These TiS2 inks can be deposited to form thin films with controllable thickness and nanosheet density over cm2 areas. This opens up pathways for a wider utilization of exofliated TiS2 towards a range of applications

Effective Rheology of Bubbles Moving in a Capillary Tube

We calculate the average volumetric flux versus pressure drop of bubbles moving in a single capillary tube with varying diameter, finding a square-root relation from mapping the flow equations onto that of a driven overdamped pendulum. The calculation is based on a derivation of the equation of motion of a bubble train from considering the capillary forces and the entropy production associated with the viscous flow. We also calculate the configurational probability of the positions of the bubbles.Comment: 4 pages, 1 figur

Campylobacter jejuni transcriptome changes during loss of culturability in water

Background: Water serves as a potential reservoir for Campylobacter, the leading cause of bacterial gastroenteritis in humans. However, little is understood about the mechanisms underlying variations in survival characteristics between different strains of C. jejuni in natural environments, including water. Results: We identified three Campylobacter jejuni strains that exhibited variability in their ability to retain culturability after suspension in tap water at two different temperatures (4°C and 25°C). Of the three strains C. jejuni M1 exhibited the most rapid loss of culturability whilst retaining viability. Using RNAseq transcriptomics, we characterised C. jejuni M1 gene expression in response to suspension in water by analyzing bacterial suspensions recovered immediately after introduction into water (Time 0), and from two sampling time/temperature combinations where considerable loss of culturability was evident, namely (i) after 24 h at 25°C, and (ii) after 72 h at 4°C. Transcript data were compared with a culture-grown control. Some gene expression characteristics were shared amongst the three populations recovered from water, with more genes being up-regulated than down. Many of the up-regulated genes were identified in the Time 0 sample, whereas the majority of down-regulated genes occurred in the 25°C (24 h) sample. Conclusions: Variations in expression were found amongst genes associated with oxygen tolerance, starvation and osmotic stress. However, we also found upregulation of flagellar assembly genes, accompanied by down-regulation of genes involved in chemotaxis. Our data also suggested a switch from secretion via the sec system to via the tat system, and that the quorum sensing gene luxS may be implicated in the survival of strain M1 in water. Variations in gene expression also occurred in accessory genome regions. Our data suggest that despite the loss of culturability, C. jejuni M1 remains viable and adapts via specific changes in gene expression

Alignment of the ALICE Inner Tracking System with cosmic-ray tracks

37 pages, 15 figures, revised version, accepted by JINSTALICE (A Large Ion Collider Experiment) is the LHC (Large Hadron Collider) experiment devoted to investigating the strongly interacting matter created in nucleus-nucleus collisions at the LHC energies. The ALICE ITS, Inner Tracking System, consists of six cylindrical layers of silicon detectors with three different technologies; in the outward direction: two layers of pixel detectors, two layers each of drift, and strip detectors. The number of parameters to be determined in the spatial alignment of the 2198 sensor modules of the ITS is about 13,000. The target alignment precision is well below 10 micron in some cases (pixels). The sources of alignment information include survey measurements, and the reconstructed tracks from cosmic rays and from proton-proton collisions. The main track-based alignment method uses the Millepede global approach. An iterative local method was developed and used as well. We present the results obtained for the ITS alignment using about 10^5 charged tracks from cosmic rays that have been collected during summer 2008, with the ALICE solenoidal magnet switched off.Peer reviewe

Gradient tantalum-doped hematite homojunction photoanode improves both photocurrents and turn-on voltage for solar water splitting

Hematite has a great potential as a photoanode for photoelectrochemical (PEC) water splitting by converting solar energy into hydrogen fuels, but the solar-to-hydrogen conversion efficiency of state-of-the-art hematite photoelectrodes are still far below the values required for practical hydrogen production. Here, we report a core-shell formation of gradient tantalum-doped hematite homojunction nanorods by combination of hydrothermal regrowth strategy and hybrid microwave annealing, which enhances the photocurrent density and reduces the turn-on voltage simultaneously. The unusual bi-functional effects originate from the passivation of the surface states and intrinsic built-in electric field by the homojunction formation. The additional driving force provided by the field can effectively suppress charge???carrier recombination both in the bulk and on the surface of hematite, especially at lower potentials. Moreover, the synthesized homojunction shows a remarkable synergy with NiFe(OH)x cocatalyst with significant additional improvements of photocurrent density and cathodic shift of turn-on voltage. The work has nicely demonstrated multiple collaborative strategies of gradient doping, homojunction formation, and cocatalyst modification, and the concept could shed light on designing and constructing the efficient nanostructures of semiconductor photoelectrodes in the field of solar energy conversion. ?? 2020, The Author(s)

Li1.5La1.5MO6 (M = W6+, Te6+) as a new series of lithium-rich double perovskites for all-solid-state lithium-ion batteries

Solid-state batteries are a proposed route to safely achieving high energy densities, yet this architecture faces challenges arising from interfacial issues between the electrode and solid electrolyte. Here we develop a novel family of double perovskites, Li1.5La1.5MO6 (M = W6+, Te6+), where an uncommon lithium-ion distribution enables macroscopic ion diffusion and tailored design of the composition allows us to switch functionality to either a negative electrode or a solid electrolyte. Introduction of tungsten allows reversible lithium-ion intercalation below 1 V, enabling application as an anode (initial specific capacity >200 mAh g-1 with remarkably low volume change of ∼0.2%). By contrast, substitution of tungsten with tellurium induces redox stability, directing the functionality of the perovskite towards a solid-state electrolyte with electrochemical stability up to 5 V and a low activation energy barrier (<0.2 eV) for microscopic lithium-ion diffusion. Characterisation across multiple length- and time-scales allows interrogation of the structure-property relationships in these materials and preliminary examination of a solid-state cell employing both compositions suggests lattice-matching avenues show promise for all-solid-state batteries

Efficient suppression of electron hole recombination in oxygen-deficient hydrogen-treated TiO2 nanowires for photoelectrochemical water splitting

There is an increasing level of interest in the use of black TiO2 prepared by thermal hydrogen treatments (H:TiO2) due to the potential to enhance both the photocatalytic and the light-harvesting properties of TiO2. Here, we examine oxygen-deficient H:TiO2 nanotube arrays that have previously achieved very high solar-to-hydrogen (STH) efficiencies due to incident photon-to-current efficiency (IPCE) values of >90% for photoelectrochemical water splitting at only 0.4 V vs RHE under UV illumination. Our transient absorption (TA) mechanistic study provides strong evidence that the improved electrical properties of oxygen-deficient TiO2 enables remarkably efficient spatial separation of electron–hole pairs on the submicrosecond time scale at moderate applied bias, and this coupled to effective suppression of microsecond to seconds charge carrier recombination is the primary factor behind the dramatically improved photoelectrochemical activity

Fabrication of graphene‐covered micro‐tubes for process intensification

Graphene is known for its high surface‐area‐to‐mass ratio. However, for graphene to be used in engineering processes such as catalytic reactors or heat exchangers, high surface‐area‐to‐volume ratio is essential. Currently, graphene is only prepared in sheet form, which limits its surface‐area‐to‐volume ratio to around 200 m2 m−3. In this study, we propose and demonstrate a technique based on chemical vapour deposition (CVD) to realise graphene on a copper‐based micro‐tubular substrate to not only substantially increase its surface‐area‐to‐volume ratio to a value over 2000 m2 m−3, but also to eliminate maldistribution of flows commonly unavoidable in flat‐sheet configurations. Our approach uses a dual‐layer micro‐tubular substrate fabricated by a phase‐inversion facilitated co‐extrusion technique. In the substrate, a thin copper outer layer is employed to enable the CVD growth of graphene, and an inner Cu‐Fe layer is adopted to provide a strong mechanical support. Our study shows that this approach is feasible to produce graphene with a very high surface‐area‐to‐volume ratio for possible practical applications in catalytic reactors or heat exchangers, though problems such as the inter‐diffusion between the two metal layers and defects in graphene need to be further addressed. To the best of our knowledge, this study is the first attempt to prepare graphene with high surface‐area‐to‐volume ratio by a CVD route

Elucidating the role of dopants in the critical current density for dendrite formation in garnet electrolytes

Garnet-type solid electrolytes have attracted great interest in solid state battery research thanks to their high ionic conductivity at room temperature (10−3 S cm−1) and their electrochemical stability against lithium metal anodes. However, the formation of lithium dendrites following charge/discharge limits their applicability and commercialisation. Although widely investigated, no clear explanation of dendrite formation has been previously reported. In this work, we employ cubic Al- and Ga-doped Li7La3Zr2O12, which represent two of the solid electrolytes with higher technological importance, to investigate the formation and chemical composition of dendrites. For the first time, this study elucidates the role that the dopants play in determining the critical current density for dendrite formation and highlights the importance of controlling the dopant distribution in the garnet structure. We use a combination of techniques including Secondary Electron Microscopy and Secondary Ion Mass Spectrometry in order to analyse the microstructure and chemical composition of dendrites in Li7La3Zr2O12. We show that, following electrochemical cycling, Li6.55Ga0.15La3Zr2O12 systematically displays a critical current density 60% higher than Li6.55Al0.15La3Zr2O12. Chemical analysis revealed that in Li6.55Al0.15La3Zr2O12 the dendritic features are composed of a mixture of Al and Li species, whereas in Li6.55Ga0.15La3Zr2O12 they are uniquely composed of Li. We also show that only in pristine Li6.55Al0.15La3Zr2O12, the dopant segregates at the grain boundaries suggesting that local chemical inhomogeneity can have a fundamental role in the nucleation and propagation of dendrites