379 research outputs found
The effect of different pasture management strategies in north-west Queensland on liveweight gain and wool growth rate of several groups of young sheep
The effect of three different pasture management strategies on liveweight gain and wool growth rate of young(weaner) sheep was examined immediately after weaning on Mitchell grass-Flinders grass pastures during the dry season of north-west Queensland. The pasture management strategies were designed to mimic various industry situations, while the performance of four different progeny groups was compared and used to provide an overall assessment of pasture quality. Pasture treatments (experiment 1) consisted of three paddocks, a harvested (c. 8% of pasture harvested and baled) and spelled, a spelled, and a continuously grazed paddock. Spelled paddocks were not grazed during and after the wet season for a period of six months while the continuously grazed paddock was continuously stocked before the experiment. Experiment 2 consisted of spelled and continuously grazed paddocks. Pastures were evaluated by measuring the changes in composition and quality (experiment 1) and the responses in liveweight gain (experiments 1 and 2) and wool growth of the weaners (experiment 1). Marked improvements (c. 100%) in weaner growth rates occurred in the spelled paddocks. Greasy wool production by three groups of ewes in experiment I was about 14% greater in the harvested paddock than in the others. At the start of the trial there were no significant differences in dry matter yield but a significant difference in botanical composition occurred between paddocks. The changes in dry matter that occurred between the beginning and end of grazing were not significantly different between paddocks. Before gazing, forbs made up approximately 16%, 4% and 1% of pastures in harvested, spelled and continuously grazed paddocks respectively. The change in the percentage forbs that occurred between the beginning and end of the grazing period was significantly greater in the harvested paddock than in the other paddocks indicating preferential selection and intake by sheep. The differences in weaner live weight and wool growth between paddocks suggest that paddock management can improve weaner productivity. The study also indicates that paddock management could be successfully used to increase the percentage of forbs and quality of the pasture during the dry season. The superior wool growth of two progeny groups also suggests that improved productivity of breeding flocks in the tropics is possible if superior sheep can be identified. The results highlight the importance of preferential management of pasture for weaners so that productivity advantages can be exploited
Recommended from our members
Today`s thermal imaging systems: Background and applications for civilian law enforcement and military force protection
Thermal (infrared) imagers can solve many security assessment problems associated with the protection of high-value assets at military bases, secure installations, or commercial facilities. Thermal imagers can provide surveillance video from security areas or perimeters both day and night without expensive security lighting. In the past, thermal imagers required cryogenic cooling to operate. The high cost and maintenance requirements restricted their use. However, recent developments in reliable, linear drive cryogenic coolers and uncooled infrared imagers have dramatically reduced system cost. These technology developments are resulting in greater accessibility and practicality for military as well as civilian security and force protection applications. This paper discusses recent advances in thermal imaging technology including uncooled and cryo-cooled. Applications of Forward Looking InfraRed (FLIR) systems are also discussed, including integration with a high-speed pan/tilt mount and remote control, video frame storage and recall, low-cost vehicle-mounted systems, and hand-held devices. Other facility installation topics will be discussed, such as site layout, assessment ranges, imager positioning, fields-of-view, sensor and alarm reporting systems, and communications links
Non-linear regression models for Approximate Bayesian Computation
Approximate Bayesian inference on the basis of summary statistics is
well-suited to complex problems for which the likelihood is either
mathematically or computationally intractable. However the methods that use
rejection suffer from the curse of dimensionality when the number of summary
statistics is increased. Here we propose a machine-learning approach to the
estimation of the posterior density by introducing two innovations. The new
method fits a nonlinear conditional heteroscedastic regression of the parameter
on the summary statistics, and then adaptively improves estimation using
importance sampling. The new algorithm is compared to the state-of-the-art
approximate Bayesian methods, and achieves considerable reduction of the
computational burden in two examples of inference in statistical genetics and
in a queueing model.Comment: 4 figures; version 3 minor changes; to appear in Statistics and
Computin
Optimizing tuning masses for helicopter rotor blade vibration reduction including computed airloads and comparison with test data
The development and validation of an optimization procedure to systematically place tuning masses along a rotor blade span to minimize vibratory loads are described. The masses and their corresponding locations are the design variables that are manipulated to reduce the harmonics of hub shear for a four-bladed rotor system without adding a large mass penalty. The procedure incorporates a comprehensive helicopter analysis to calculate the airloads. Predicting changes in airloads due to changes in design variables is an important feature of this research. The procedure was applied to a one-sixth, Mach-scaled rotor blade model to place three masses and then again to place six masses. In both cases the added mass was able to achieve significant reductions in the hub shear. In addition, the procedure was applied to place a single mass of fixed value on a blade model to reduce the hub shear for three flight conditions. The analytical results were compared to experimental data from a wind tunnel test performed in the Langley Transonic Dynamics Tunnel. The correlation of the mass location was good and the trend of the mass location with respect to flight speed was predicted fairly well. However, it was noted that the analysis was not entirely successful at predicting the absolute magnitudes of the fixed system loads
Model-independent search for CP violation in D0→K−K+π−π+ and D0→π−π+π+π− decays
A search for CP violation in the phase-space structures of D0 and View the MathML source decays to the final states K−K+π−π+ and π−π+π+π− is presented. The search is carried out with a data set corresponding to an integrated luminosity of 1.0 fb−1 collected in 2011 by the LHCb experiment in pp collisions at a centre-of-mass energy of 7 TeV. For the K−K+π−π+ final state, the four-body phase space is divided into 32 bins, each bin with approximately 1800 decays. The p-value under the hypothesis of no CP violation is 9.1%, and in no bin is a CP asymmetry greater than 6.5% observed. The phase space of the π−π+π+π− final state is partitioned into 128 bins, each bin with approximately 2500 decays. The p-value under the hypothesis of no CP violation is 41%, and in no bin is a CP asymmetry greater than 5.5% observed. All results are consistent with the hypothesis of no CP violation at the current sensitivity
Search for the lepton-flavor-violating decays Bs0→e±μ∓ and B0→e±μ∓
A search for the lepton-flavor-violating decays Bs0→e±μ∓ and B0→e±μ∓ is performed with a data sample, corresponding to an integrated luminosity of 1.0 fb-1 of pp collisions at √s=7 TeV, collected by the LHCb experiment. The observed number of Bs0→e±μ∓ and B0→e±μ∓ candidates is consistent with background expectations. Upper limits on the branching fractions of both decays are determined to be B(Bs0→e±μ∓)101 TeV/c2 and MLQ(B0→e±μ∓)>126 TeV/c2 at 95% C.L., and are a factor of 2 higher than the previous bounds
Branching fraction and CP asymmetry of the decays B+→K0Sπ+ and B+→K0SK+
An analysis of B+ → K0
Sπ+ and B+ → K0
S K+ decays is performed with the LHCb experiment. The pp
collision data used correspond to integrated luminosities of 1 fb−1 and 2 fb−1 collected at centre-ofmass
energies of
√
s = 7 TeV and
√
s = 8 TeV, respectively. The ratio of branching fractions and the
direct CP asymmetries are measured to be B(B+ → K0
S K+
)/B(B+ → K0
Sπ+
) = 0.064 ± 0.009 (stat.) ±
0.004 (syst.), ACP(B+ → K0
Sπ+
) = −0.022 ± 0.025 (stat.) ± 0.010 (syst.) and ACP(B+ → K0
S K+
) =
−0.21 ± 0.14 (stat.) ± 0.01 (syst.). The data sample taken at
√
s = 7 TeV is used to search for
B+
c
→ K0
S K+ decays and results in the upper limit ( fc · B(B+
c
→ K0
S K+
))/( fu · B(B+ → K0
Sπ+
)) <
5.8 × 10−2 at 90% confidence level, where fc and fu denote the hadronisation fractions of a ¯b
quark
into a B+
c or a B+ meson, respectively
Measurements of long-range near-side angular correlations in TeV proton-lead collisions in the forward region
Two-particle angular correlations are studied in proton-lead collisions at a
nucleon-nucleon centre-of-mass energy of TeV, collected
with the LHCb detector at the LHC. The analysis is based on data recorded in
two beam configurations, in which either the direction of the proton or that of
the lead ion is analysed. The correlations are measured in the laboratory
system as a function of relative pseudorapidity, , and relative
azimuthal angle, , for events in different classes of event
activity and for different bins of particle transverse momentum. In
high-activity events a long-range correlation on the near side, , is observed in the pseudorapidity range . This
measurement of long-range correlations on the near side in proton-lead
collisions extends previous observations into the forward region up to
. The correlation increases with growing event activity and is found
to be more pronounced in the direction of the lead beam. However, the
correlation in the direction of the lead and proton beams are found to be
compatible when comparing events with similar absolute activity in the
direction analysed.Comment: All figures and tables, along with any supplementary material and
additional information, are available at
https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2015-040.htm
Study of the production of and hadrons in collisions and first measurement of the branching fraction
The product of the () differential production
cross-section and the branching fraction of the decay () is
measured as a function of the beauty hadron transverse momentum, ,
and rapidity, . The kinematic region of the measurements is and . The measurements use a data sample
corresponding to an integrated luminosity of collected by the
LHCb detector in collisions at centre-of-mass energies in 2011 and in 2012. Based on previous LHCb
results of the fragmentation fraction ratio, , the
branching fraction of the decay is
measured to be \begin{equation*} \mathcal{B}(\Lambda_b^0\rightarrow J/\psi
pK^-)= (3.17\pm0.04\pm0.07\pm0.34^{+0.45}_{-0.28})\times10^{-4},
\end{equation*} where the first uncertainty is statistical, the second is
systematic, the third is due to the uncertainty on the branching fraction of
the decay , and the
fourth is due to the knowledge of . The sum of the
asymmetries in the production and decay between and
is also measured as a function of and .
The previously published branching fraction of , relative to that of , is updated.
The branching fractions of are determined.Comment: 29 pages, 19figures. All figures and tables, along with any
supplementary material and additional information, are available at
https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2015-032.htm
- …