CHEOPS: The ESA Mission for Exo-Planets Characterization Ready for Launch

The European Space Agency (ESA) Science Programme Committee (SPC) selected CHEOPS (Characterizing Exoplanets Satellite) in October 2012 as the first Small-class mission (S1) within the Agency’s Scientific Programme. It is considered as a pilot case for implementing “small science missions” in the agency with the following requirements: science driven mission selected through an open Call; an implementation cycle, from the Call to launch, drastically shorter than for Medium-class (M) and Large-class (L) missions; a strict cost-cap to ESA, with possibly higher Member States involvement than for M or L missions. The CHEOPS mission is devoted to the characterization of known exoplanets orbiting bright stars, achieved through the precise measurement of exoplanet radii using the technique of transit photometry. It was adopted for implementation in February 2014 as a partnership between the ESA Science Programme and Switzerland, with a number of other Member States delivering significant contributions to the instrument development and to operations. The CHEOPS instrument is an optical Ritchey-Chrétien telescope with 300 mm effective aperture diameter and a large external baffle to minimize straylight. The compact CHEOPS spacecraft (approx. 300 kg, 1.5 m size), based on a flight-proven platform, will orbit the Earth in a dawn-dusk Sun Synchronous Orbit at 700 km altitude. CHEOPS completed the Preliminary Design Review at the end of September 2014, and passed the Critical Design Review in May 2016. In the course of 2017, flight platform and payload have been integrated and tested, and then followed by satellite level activities, targeting flight readiness by the end of year 2019. Implementation and validation of the ground segment, which is composed of the MOC (Mission Operations Centre), located in Torrejón (Madrid, Spain) and the SOC (Science Operations Centre), located at the University of Geneva (Switzerland) was achieved in parallel. CHEOPS will be launched as a secondary passenger on a Soyuz from Kourou by end of 2019. The paper describes the latest CHEOPS development status, focusing on the activities for verification and validation of the satellite and the system at large, including the ground segment and the activities in preparation for S/C launch and its operations. Additional details can be found on the ESA and UBE websites referred in [8]

Analysis of Early Science observations with the CHaracterising ExOPlanets Satellite (CHEOPS) using pycheops

Funding: ACC and TW acknowledge support from UK Science and Technologies Facilities Council (STFC) ST/R00824/1.CHEOPS (CHaracterising ExOPlanet Satellite) is an ESA S-class mission that observes bright stars at high cadence from low-Earth orbit. The main aim of the mission is to characterize exoplanets that transit nearby stars using ultrahigh precision photometry. Here we report the analysis of transits observed by CHEOPS during its Early Science observing programme for four well-known exoplanets: GJ 436 b, HD 106315 b, HD 97658 b and GJ 1132 b. The analysis is done using pycheops, an open-source software package we have developed to easily and efficiently analyse CHEOPS light curve data using state-of-the-art techniques that are fully described herein. We show that the precision of the transit parameters measured using CHEOPS is comparable to that from larger space telescopes such as Spitzer Space Telescope and Kepler. We use the updated planet parameters from our analysis to derive new constraints on the internal structure of these four exoplanets.PostprintPeer reviewe

CHEOPS geometric albedo of the hot Jupiter HD 209458 b

Funding: P.F.L.M. acknowledges support from STFC research grant number ST/M001040/1. This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (project Four Aces. grant agreement No 724427).We report the detection of the secondary eclipse of the hot Jupiter HD 209458 b in optical/visible light using the CHEOPS space telescope. Our measurement of 20.4-3.3+3.2 parts per million translates into a geometric albedo of Ag = 0.096 ± 0.016. The previously estimated dayside temperature of about 1500 K implies that our geometric albedo measurement consists predominantly of reflected starlight and is largely uncontaminated by thermal emission. This makes the present result one of the most robust measurements of Ag for any exoplanet. Our calculations of the bandpassintegrated geometric albedo demonstrate that the measured value of Ag is consistent with a cloud-free atmosphere, where starlight is reflected via Rayleigh scattering by hydrogen molecules, and the water and sodium abundances are consistent with stellar metallicity. We predict that the bandpass-integrated TESS geometric albedo is too faint to detect and that a phase curve of HD 209458 b observed by CHEOPS would have a distinct shape associated with Rayleigh scattering if the atmosphere is indeed cloud free.Publisher PDFPeer reviewe

Constraining the reflective properties of WASP-178b using Cheops photometry

Multiwavelength photometry of the secondary eclipses of extrasolar planets is able to disentangle the reflected and thermally emitted light radiated from the planetary dayside. This leads to the measurement of the planetary geometric albedo $A_g$, which is an indicator of the presence of clouds in the atmosphere, and the recirculation efficiency $\epsilon$, which quantifies the energy transport within the atmosphere. In this work we aim to measure $A_g$ and $\epsilon$ for the planet WASP-178 b, a highly irradiated giant planet with an estimated equilibrium temperature of 2450 K.} We analyzed archival spectra and the light curves collected by Cheops and Tess to characterize the host WASP-178, refine the ephemeris of the system and measure the eclipse depth in the passbands of the two respective telescopes. We measured a marginally significant eclipse depth of 70$\pm$40 ppm in the Tess passband and statistically significant depth of 70$\pm$20 ppm in the Cheops passband. Combining the eclipse depth measurement in the Cheops (lambda_eff=6300 AA) and Tess (lambda_eff=8000 AA) passbands we constrained the dayside brightness temperature of WASP-178 b in the 2250-2800 K interval. The geometric albedo 0.1<$\rm A_g$<0.35 is in general agreement with the picture of poorly reflective giant planets, while the recirculation efficiency $\epsilon>$0.7 makes WASP-178 b an interesting laboratory to test the current heat recirculation models.Comment: Accepted by Astronomy and Astrophysics on 31/08/202

TOI-1055 b: Neptunian planet characterised with HARPS, TESS, and CHEOPS

CONTEXT: TOI-1055 is a Sun-like star known to host a transiting Neptune-sized planet on a 17.5-day orbit (TOI-1055 b). Radial velocity (RV) analyses carried out by two independent groups using nearly the same set of HARPS spectra have provided measurements of planetary masses that differ by ∼2σ. AIMS: Our aim in this work is to solve the inconsistency in the published planetary masses by significantly extending the set of HARPS RV measurements and employing a new analysis tool that is able to account and correct for stellar activity. Our further aim was to improve the precision on measurements of the planetary radius by observing two transits of the planet with the CHEOPS space telescope. METHODS: We fit a skew normal function to each cross correlation function extracted from the HARPS spectra to obtain RV measurements and hyperparameters to be used for the detrending. We evaluated the correlation changes of the hyperparameters along the RV time series using the breakpoint technique. We performed a joint photometric and RV analysis using a Markov chain Monte Carlo scheme to simultaneously detrend the light curves and the RV time series. RESULTS: We firmly detected the Keplerian signal of TOI-1055 b, deriving a planetary mass of Mb = 20.4−2.5+2.6 M⊕ (∼12%). This value is in agreement with one of the two estimates in the literature, but it is significantly more precise. Thanks to the TESS transit light curves combined with exquisite CHEOPS photometry, we also derived a planetary radius of Rb = 3.490−0.064+0.070 R⊕ (∼1.9%). Our mass and radius measurements imply a mean density of ρb = 2.65−0.35+0.37 g cm−3 (∼14%). We further inferred the planetary structure and found that TOI-1055 b is very likely to host a substantial gas envelope with a mass of 0.41−0.20+0.34 M⊕ and a thickness of 1.05−0.29+0.30 R⊕. CONCLUSIONS: Our RV extraction combined with the breakpoint technique has played a key role in the optimal removal of stellar activity from the HARPS time series, enabling us to solve the tension in the planetary mass values published so far for TOI-1055 b

TOI-1055 b: Neptunian planet characterised with HARPS, TESS, and CHEOPS

Context. TOI-1055 is a Sun-like star known to host a transiting Neptune-sized planet on a 17.5-day orbit (TOI-1055 b). Radial velocity (RV) analyses carried out by two independent groups using nearly the same set of HARPS spectra have provided measurements of planetary masses that differ by ∼2σ. Aims. Our aim in this work is to solve the inconsistency in the published planetary masses by significantly extending the set of HARPS RV measurements and employing a new analysis tool that is able to account and correct for stellar activity. Our further aim was to improve the precision on measurements of the planetary radius by observing two transits of the planet with the CHEOPS space telescope. Methods. We fit a skew normal function to each cross correlation function extracted from the HARPS spectra to obtain RV measurements and hyperparameters to be used for the detrending. We evaluated the correlation changes of the hyperparameters along the RV time series using the breakpoint technique. We performed a joint photometric and RV analysis using a Markov chain Monte Carlo scheme to simultaneously detrend the light curves and the RV time series. Results. We firmly detected the Keplerian signal of TOI-1055 b, deriving a planetary mass of Mb = 20.4-2.5+2.6 MO (∼12%). This value is in agreement with one of the two estimates in the literature, but it is significantly more precise. Thanks to the TESS transit light curves combined with exquisite CHEOPS photometry, we also derived a planetary radius of Rb = 3.490-0.064+0.070 RO (∼1.9%). Our mass and radius measurements imply a mean density of ρb = 2.65-0.35+0.37 g cm-3 (∼14%). We further inferred the planetary structure and found that TOI-1055 b is very likely to host a substantial gas envelope with a mass of 0.41-0.20+0.34 MO and a thickness of 1.05-0.29+0.30 RO. Conclusions. Our RV extraction combined with the breakpoint technique has played a key role in the optimal removal of stellar activity from the HARPS time series, enabling us to solve the tension in the planetary mass values published so far for TOI-1055 b

The geometric albedo of the hot Jupiter HD 189733b measured with CHEOPS

Context. Measurements of the occultation of an exoplanet at visible wavelengths allow us to determine the reflective properties of a planetary atmosphere. The observed occultation depth can be translated into a geometric albedo. This in turn aids in characterising the structure and composition of an atmosphere by providing additional information on the wavelength-dependent reflective qualities of the aerosols in the atmosphere. Aims. Our aim is to provide a precise measurement of the geometric albedo of the gas giant HD 189733b by measuring the occultation depth in the broad optical bandpass of CHEOPS (350 - 1100 nm). Methods. We analysed 13 observations of the occultation of HD 189733b performed by CHEOPS utilising the Python package PyCHEOPS. The resulting occultation depth is then used to infer the geometric albedo accounting for the contribution of thermal emission from the planet. We also aid the analysis by refining the transit parameters combining observations made by the TESS and CHEOPS space telescopes. Results. We report the detection of an $24.7 \pm 4.5$ ppm occultation in the CHEOPS observations. This occultation depth corresponds to a geometric albedo of $0.076 \pm 0.016$. Our measurement is consistent with models assuming the atmosphere of the planet to be cloud-free at the scattering level and absorption in the CHEOPS band to be dominated by the resonant Na doublet. Taking into account previous optical-light occultation observations obtained with the Hubble Space Telescope, both measurements combined are consistent with a super-stellar Na elemental abundance in the dayside atmosphere of HD 189733b. We further constrain the planetary Bond albedo to between 0.013 and 0.42 at 3$\sigma$ confidence.Comment: 17 pages, 10 figures, accepted for publication in A&

Connecting photometric and spectroscopic granulation signals with CHEOPS and ESPRESSO

Context. Stellar granulation generates fluctuations in photometric and spectroscopic data whose properties depend on the stellar type, composition, and evolutionary state. Characterizing granulation is key for understanding stellar atmospheres and detecting planets. Aims. We aim to detect the signatures of stellar granulation, link spectroscopic and photometric signatures of convection for main-sequence stars, and test predictions from 3D hydrodynamic models. Methods. For the first time, we observed two bright stars (Teff = 5833 and 6205 K) with high-precision observations taken simultaneously with CHEOPS and ESPRESSO. We analyzed the properties of the stellar granulation signal in each individual dataset. We compared them to Kepler observations and 3D hydrodynamic models. While isolating the granulation-induced changes by attenuating and filtering the p-mode oscillation signals, we studied the relationship between photometric and spectroscopic observables. Results. The signature of stellar granulation is detected and precisely characterized for the hotter F star in the CHEOPS and ESPRESSO observations. For the cooler G star, we obtain a clear detection in the CHEOPS dataset only. The TESS observations are blind to this stellar signal. Based on CHEOPS observations, we show that the inferred properties of stellar granulation are in agreement with both Kepler observations and hydrodynamic models. Comparing their periodograms, we observe a strong link between spectroscopic and photometric observables. Correlations of this stellar signal in the time domain (flux versus radial velocities, RV) and with specific spectroscopic observables (shape of the cross-correlation functions) are however difficult to isolate due to S/N dependent variations. Conclusions. In the context of the upcoming PLATO mission and the extreme precision RV surveys, a thorough understanding of the properties of the stellar granulation signal is needed. The CHEOPS and ESPRESSO observations pave the way for detailed analyses of this stellar process

A full transit of v 2 Lupi d and the search for an exomoon in its Hill sphere with CHEOPS

The planetary system around the naked-eye star v2 Lupi (HD 136352; TOI-2011) is composed of three exoplanets with masses of 4.7, 11.2, and 8.6 Earth masses (M⊕). The TESS and CHEOPS missions revealed that all three planets are transiting and have radii straddling the radius gap separating volatile-rich and volatile-poor super-earths. Only a partial transit of planet d had been covered so we re-observed an inferior conjunction of the long-period 8.6 M⊕ exoplanet v2 Lup d with the CHEOPS space telescope. We confirmed its transiting nature by covering its whole 9.1 h transit for the first time. We refined the planet transit ephemeris to P = 107.13610.0022+0.0019 days and Tc = 2459009.77590.0096+0.0101 BJDTDB, improving by ~40 times on the previously reported transit timing uncertainty. This refined ephemeris will enable further follow-up of this outstanding long-period transiting planet to search for atmospheric signatures or explore the planet s Hill sphere in search for an exomoon. In fact, the CHEOPS observations also cover the transit of a large fraction of the planet s Hill sphere, which is as large as the Earth s, opening the tantalising possibility of catching transiting exomoons. We conducted a search for exomoon signals in this single-epoch light curve but found no conclusive photometric signature of additional transiting bodies larger than Mars. Yet, only a sustained follow-up of v2 Lup d transits will warrant a comprehensive search for a moon around this outstanding exoplanet

The Large Observatory for x-ray timing

The Large Observatory For x-ray Timing (LOFT) was studied within ESA M3 Cosmic Vision framework and participated in the final down-selection for a launch slot in 2022-2024. Thanks to the unprecedented combination of effective area and spectral resolution of its main instrument, LOFT will study the behaviour of matter under extreme conditions, such as the strong gravitational field in the innermost regions of accretion flows close to black holes and neutron stars, and the supra-nuclear densities in the interior of neutron stars. The science payload is based on a Large Area Detector (LAD, 10 m2 effective area, 2-30 keV, 240 eV spectral resolution, 1° collimated field of view) and a WideField Monitor (WFM, 2-50 keV, 4 steradian field of view, 1 arcmin source location accuracy, 300 eV spectral resolution). The WFM is equipped with an on-board system for bright events (e.g. GRB) localization. The trigger time and position of these events are broadcast to the ground within 30 s from discovery. In this paper we present the status of the mission at the end of its Phase A study