84 research outputs found

    Structural and functional relationship of Pin1

    Get PDF
    Master'sMASTER OF SCIENC

    Characterization of Electromagnetic Valveless Micropump

    Get PDF
    This paper presents an electromagnetically-actuated micropump for microfluidic application. The system comprises two modules; an electromagnetic actuator module and a diffuser module. Fabrication of the diffuser module can be achieved using photolithography process with a master template and a PDMS prepolymer as the structural material. The actuator module consists of two power inductors and two NdFeB permanent magnets placed between the diffuser elements. The choice of this actuation principle merits from low operating voltage (1.5 Vdc) and the flow direction can be controlled by changing the orientation of the magnet vibration. Maximum volumetric flow rate of the fabricated device at zero backpressure is 0.9756 µLs-1 and 0.4659 µLs-1 at the hydrostatic backpressure of 10 mmH2O at 9 Hz of switching speed

    Characteristic of Thin Sheet Membrane for a Mechanical Driven Micropump System

    Get PDF
    This paper demonstrates the characteristic of thin sheet membrane for a mechanical driven micropump system by using a spin coater machine. The moving diaphragm material is made from a PDMS prepolymer material. A 100 mm diameter petri dish is used as the mold template for the membrane fabrication. There are three variables that influence the membrane thickness formation during the spin coating process, which are the prepolymer weight, spin coater spinning rate speed and the spinning time. Based on the study, the optimum parameters to fabricate a 300 µm thin sheet membrane by using a 100 mm diameter of petri dish are 2.5 g of prepolymer, 500 rpm of spin coater speed and 180 s of spin time. These parameters yield a thin sheet membrane for the micropump application with 314.82 ± 3.6556 µm thickness

    Electrical potential and electrical field distribution of square electrical capacitance tomography

    Get PDF
    Electrical Capacitance Tomography (ECT) system helps user to understand the flow distribution inside the close pipe by detecting the variation of permittivity distribution in the inspection area. Generally, most reported ECT systems are implemented to circular shape pipe only. However, square shape pipes are sometimes found in power industry and chemical reactor, therefore this paper is studying the electrical distribution of ECT system within a square pipe. ECT is able to provide fast response, low cost and non-radiation system but similar to all other electrical tomography system, ECT suffers from soft-field effect. This paper proposes segmentation excitation to overcome this problem. Segmentation excitation applies when more than one electrode excited at one time. This paper focuses Protocol 2 or 2-electrode excitation for 8-electrode square ECT system. The simulation was done by using COMSOL Multiphysics. The images of the excitations are presented in this paper. The electrical potential is recorded at the center of the system to analyses the strength of the electrical potential. In addition for square ECT system, the corner configuration provides 3.40% higher electrical potential compared to side excitation configuration

    Miniaturized planar tomography for multiphase stagnant sample detection

    Get PDF
    Miniaturized device offers portability, high throughput and faster time response compared to macroscale devices. In microdevices, most of the application utilizes planar electrode for microanalysis process as it is inexpensive, highly controllable system and easy for installation. In addition, miniaturized planar sensor offers great potential for microscale medical diagnosis, chemical analysis, environmental analysis, cell culture application and single cell measurement using tomography measurement. In this project, a miniaturized planar tomography system is developed for multiphase sample detection such as liquid-solid and liquid-liquid. Eight-electrode device was fabricated on the copper plated printed circuit board (PCB) using the commercial fabrication technique. The ability of the proposed device in reconstructing images of a multiphase sample using Linear Back Projection algorithm is tested. Experimental results show that the reconstructed images closely resemble with the cross-section of the stagnant multiphase sample

    Novel 2-benzoyl-6-(2,3- dimethoxybenzylidene)-cyclohexenol confers selectivity toward human MLH1 defective cancer cells through synthetic lethality

    Get PDF
    DNA mismatch repair (MMR) deficiency has been associated with a higher risk of developing colorectal, endometrial, and ovarian cancer, and confers resistance in conventional chemotherapy. In addition to the lack of treatment options that work efficaciously on these MMR-deficient cancer patients, there is a great need to discover new drug leads for this purpose. In this study, we screened through a library of commercial and semisynthetic natural compounds to identify potential synthetic lethal drugs that may selectively target MLH1 mutants using MLH1 isogenic colorectal cancer cell lines and various cancer cell lines with known MLH1 status. We identified a novel diarylpentanoid analogue, 2-benzoyl-6-(2,3-dimethoxybenzylidene)-cyclohexenol, coded as AS13, that demonstrated selective toxicity toward MLH1-deficient cancer cells. Subsequent analysis suggested AS13 induced elevated levels of oxidative stress, resulting in DNA damage where only the proficient MLH1 cells were able to be repaired and hence escaping cellular death. While AS13 is modest in potency and selectivity, this discovery has the potential to lead to further drug development that may offer better treatment options for cancer patients with MLH1 deficiency

    New genetic loci link adipose and insulin biology to body fat distribution.

    Get PDF
    Body fat distribution is a heritable trait and a well-established predictor of adverse metabolic outcomes, independent of overall adiposity. To increase our understanding of the genetic basis of body fat distribution and its molecular links to cardiometabolic traits, here we conduct genome-wide association meta-analyses of traits related to waist and hip circumferences in up to 224,459 individuals. We identify 49 loci (33 new) associated with waist-to-hip ratio adjusted for body mass index (BMI), and an additional 19 loci newly associated with related waist and hip circumference measures (P < 5 × 10(-8)). In total, 20 of the 49 waist-to-hip ratio adjusted for BMI loci show significant sexual dimorphism, 19 of which display a stronger effect in women. The identified loci were enriched for genes expressed in adipose tissue and for putative regulatory elements in adipocytes. Pathway analyses implicated adipogenesis, angiogenesis, transcriptional regulation and insulin resistance as processes affecting fat distribution, providing insight into potential pathophysiological mechanisms

    Use of anticoagulants and antiplatelet agents in stable outpatients with coronary artery disease and atrial fibrillation. International CLARIFY registry

    Get PDF

    Worldwide trends in underweight and obesity from 1990 to 2022: a pooled analysis of 3663 population-representative studies with 222 million children, adolescents, and adults

    Get PDF
    Background Underweight and obesity are associated with adverse health outcomes throughout the life course. We estimated the individual and combined prevalence of underweight or thinness and obesity, and their changes, from 1990 to 2022 for adults and school-aged children and adolescents in 200 countries and territories. Methods We used data from 3663 population-based studies with 222 million participants that measured height and weight in representative samples of the general population. We used a Bayesian hierarchical model to estimate trends in the prevalence of different BMI categories, separately for adults (age ≥20 years) and school-aged children and adolescents (age 5–19 years), from 1990 to 2022 for 200 countries and territories. For adults, we report the individual and combined prevalence of underweight (BMI &lt;18·5 kg/m2) and obesity (BMI ≥30 kg/m2). For school&#x2;aged children and adolescents, we report thinness (BMI &lt;2 SD below the median of the WHO growth reference) and obesity (BMI &gt;2 SD above the median). Findings From 1990 to 2022, the combined prevalence of underweight and obesity in adults decreased in 11 countries (6%) for women and 17 (9%) for men with a posterior probability of at least 0·80 that the observed changes were true decreases. The combined prevalence increased in 162 countries (81%) for women and 140 countries (70%) for men with a posterior probability of at least 0·80. In 2022, the combined prevalence of underweight and obesity was highest in island nations in the Caribbean and Polynesia and Micronesia, and countries in the Middle East and north Africa. Obesity prevalence was higher than underweight with posterior probability of at least 0·80 in 177 countries (89%) for women and 145 (73%) for men in 2022, whereas the converse was true in 16 countries (8%) for women, and 39 (20%) for men. From 1990 to 2022, the combined prevalence of thinness and obesity decreased among girls in five countries (3%) and among boys in 15 countries (8%) with a posterior probability of at least 0·80, and increased among girls in 140 countries (70%) and boys in 137 countries (69%) with a posterior probability of at least 0·80. The countries with highest combined prevalence of thinness and obesity in school-aged children and adolescents in 2022 were in Polynesia and Micronesia and the Caribbean for both sexes, and Chile and Qatar for boys. Combined prevalence was also high in some countries in south Asia, such as India and Pakistan, where thinness remained prevalent despite having declined. In 2022, obesity in school-aged children and adolescents was more prevalent than thinness with a posterior probability of at least 0·80 among girls in 133 countries (67%) and boys in 125 countries (63%), whereas the converse was true in 35 countries (18%) and 42 countries (21%), respectively. In almost all countries for both adults and school-aged children and adolescents, the increases in double burden were driven by increases in obesity, and decreases in double burden by declining underweight or thinness. Interpretation The combined burden of underweight and obesity has increased in most countries, driven by an increase in obesity, while underweight and thinness remain prevalent in south Asia and parts of Africa. A healthy nutrition transition that enhances access to nutritious foods is needed to address the remaining burden of underweight while curbing and reversing the increase in obesit
    corecore