Aplicaciones electroquímicas al tratamiento de aguas residuales

El presente libro tiene como finalidad compilar numerosas investigaciones en el campo de la tecnología electroquímica y sus aplicaciones ambientales, contando con la colaboración de un gran número de investigadores tanto nacionales como extranjeros, proponiendo con ello una visión amplia dentro de la aplicación de la electroquímica. Los temas que integran esta obra se escogieron cuidadosamente considerando desde los principios básicos de la electroquímica aplicada al tratamiento de aguas residuales hasta los parámetros a considerar durante el diseño, operación y evaluación de dichos sistemas, sin dejar de lado las aplicaciones utilizadas en la actualidad en la industria, la docencia y la investigación. Este libro reúne diversas temáticas por lo que puede considerarse como un compendio de aquellos elementos que el lector requiere para poder tener una visión amplia de las aplicaciones de la electroquímica en el campo del tratamiento de agua residual.En el Capítulo 1 se presenta una primera impresión de los Fundamentes de la Electroquímica Ambiental, en donde los autores explican cómo esta disciplina es una nueva área de la ciencia en donde se emplean conocimientos de Electroquímica, Ingeniería Química y Ciencia de Materiales, así como las aplicaciones específicas para la remediación ambiental. En el Capítulo 2 los autores ofrecen una descripción de los principales parámetros fisicoquímicos y biológicos que se emplean para definir a la calidad del agua. Este capítulo describe en función de qué características físicas, químicas y biológicas se puede evaluar a un agua residual así como también la aplicación de estas características como variables de control de un proceso de tratamiento y también como el empleo de ellas para limitar las concentraciones máximas permisibles de descarga de aguas residuales. El Capítulo 3 se refiere a uno de los procesos más empleados en el tratamiento de agua: la coagulación-floculación. Se aborda desde una óptica teórica hasta la descripción de un ejemplo de aplicación en la industria. Resulta importante incluir este capítulo ya que uno de los métodos más prometedores en la electroquímica ambiental es la electrocoagulación, la cual se narra en el Capítulo 6. Las bases de las celdas de laboratorio y reactores industriales electroquímicos se relatan en el Capítulo 4. En particular, se refieren las implicaciones que tienen las principales características físicas y de diseño de celdas de laboratorio y reactores electroquímicos industriales que permiten obtener transformaciones eficientes gracias a un correcto control del potencial de electrodo en estos sistemas. La implementación de procesos electroquímicos para su aplicación a nivel industrial, requiere del diseño eficiente del dispositivo central: el reactor electroquímico. Por lo que, en el Capítulo 5 se presentan los elementos de análisis de reactores electroquímicos para su diseño y caracterización. El Capítulo 7 describe bajo qué circunstancias se puede llevar a cabo el proceso de electroflotación. Los autores muestran cómo este proceso está influenciado por el pH de la solución acuosa, la densidad de corriente y el tipo de electrodos que se emplean. El lector encontrará en el Capítulo 8 las bases teóricas de uno de los procesos que involucra la química de la reacción de Fenton, así como las aplicaciones ambientales para el tratamiento de soluciones sintéticas y reales con diferentes contaminantes refractarios, tales como plaguicidas, colorantes, productos de cuidado personal, fármacos y residuos químicos industriales. En el Capítulo 9 se presentan algunos conceptos fundamentales sobre la Electrooxidación, también conocida como oxidación electroquímica, la cual está enfocada a realizar la oxidación de contaminantes presentes en aguas residuales sobre la superficie de electrodos. La tecnología para la electrogeneración de peróxido de hidrógeno y su empleo en el tratamiento de agua residual se describe en el Capítulo 10. Uno de los metales pesados que tienen un alto grado de toxicidad en el ambiente es el Cr(VI), el cual no puede ser removido por métodos convencionales por lo que una tecnología que puede emplearse en este tratamiento se relata en el Capítulo 11. En el Capítulo 12 se presentan los avances más recientes cuando se emplean los métodos electroquímicos con algún otro tipo de tratamiento, lo que ha resultado en la obtención de sinergias en los procesos, lo que implica una reducción en los costos de operación. Finalmente, en el Capítulo 13, se presenta el tema de usos y aplicaciones de sensores químicos y electroquímicos para la detección de contaminantes en agua y agua residual

Effects of alirocumab on types of myocardial infarction: insights from the ODYSSEY OUTCOMES trial

Aims  The third Universal Definition of Myocardial Infarction (MI) Task Force classified MIs into five types: Type 1, spontaneous; Type 2, related to oxygen supply/demand imbalance; Type 3, fatal without ascertainment of cardiac biomarkers; Type 4, related to percutaneous coronary intervention; and Type 5, related to coronary artery bypass surgery. Low-density lipoprotein cholesterol (LDL-C) reduction with statins and proprotein convertase subtilisin–kexin Type 9 (PCSK9) inhibitors reduces risk of MI, but less is known about effects on types of MI. ODYSSEY OUTCOMES compared the PCSK9 inhibitor alirocumab with placebo in 18 924 patients with recent acute coronary syndrome (ACS) and elevated LDL-C (≥1.8 mmol/L) despite intensive statin therapy. In a pre-specified analysis, we assessed the effects of alirocumab on types of MI. Methods and results  Median follow-up was 2.8 years. Myocardial infarction types were prospectively adjudicated and classified. Of 1860 total MIs, 1223 (65.8%) were adjudicated as Type 1, 386 (20.8%) as Type 2, and 244 (13.1%) as Type 4. Few events were Type 3 (n = 2) or Type 5 (n = 5). Alirocumab reduced first MIs [hazard ratio (HR) 0.85, 95% confidence interval (CI) 0.77–0.95; P = 0.003], with reductions in both Type 1 (HR 0.87, 95% CI 0.77–0.99; P = 0.032) and Type 2 (0.77, 0.61–0.97; P = 0.025), but not Type 4 MI. Conclusion  After ACS, alirocumab added to intensive statin therapy favourably impacted on Type 1 and 2 MIs. The data indicate for the first time that a lipid-lowering therapy can attenuate the risk of Type 2 MI. Low-density lipoprotein cholesterol reduction below levels achievable with statins is an effective preventive strategy for both MI types.For complete list of authors see http://dx.doi.org/10.1093/eurheartj/ehz299</p

Development and validation of HERWIG 7 tunes from CMS underlying-event measurements

This paper presents new sets of parameters (“tunes”) for the underlying-event model of the HERWIG7 event generator. These parameters control the description of multiple-parton interactions (MPI) and colour reconnection in HERWIG7, and are obtained from a fit to minimum-bias data collected by the CMS experiment at s=0.9, 7, and 13Te. The tunes are based on the NNPDF 3.1 next-to-next-to-leading-order parton distribution function (PDF) set for the parton shower, and either a leading-order or next-to-next-to-leading-order PDF set for the simulation of MPI and the beam remnants. Predictions utilizing the tunes are produced for event shape observables in electron-positron collisions, and for minimum-bias, inclusive jet, top quark pair, and Z and W boson events in proton-proton collisions, and are compared with data. Each of the new tunes describes the data at a reasonable level, and the tunes using a leading-order PDF for the simulation of MPI provide the best description of the dat

Combined searches for the production of supersymmetric top quark partners in proton-proton collisions at root s=13 TeV

A combination of searches for top squark pair production using proton-proton collision data at a center-of-mass energy of 13 TeV at the CERN LHC, corresponding to an integrated luminosity of 137 fb(-1) collected by the CMS experiment, is presented. Signatures with at least 2 jets and large missing transverse momentum are categorized into events with 0, 1, or 2 leptons. New results for regions of parameter space where the kinematical properties of top squark pair production and top quark pair production are very similar are presented. Depending on themodel, the combined result excludes a top squarkmass up to 1325 GeV for amassless neutralino, and a neutralinomass up to 700 GeV for a top squarkmass of 1150 GeV. Top squarks with masses from 145 to 295 GeV, for neutralino masses from 0 to 100 GeV, with a mass difference between the top squark and the neutralino in a window of 30 GeV around the mass of the top quark, are excluded for the first time with CMS data. The results of theses searches are also interpreted in an alternative signal model of dark matter production via a spin-0 mediator in association with a top quark pair. Upper limits are set on the cross section for mediator particle masses of up to 420 GeV

MUSiC : a model-unspecific search for new physics in proton-proton collisions at root s=13TeV

Results of the Model Unspecific Search in CMS (MUSiC), using proton-proton collision data recorded at the LHC at a centre-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 35.9 fb(-1), are presented. The MUSiC analysis searches for anomalies that could be signatures of physics beyond the standard model. The analysis is based on the comparison of observed data with the standard model prediction, as determined from simulation, in several hundred final states and multiple kinematic distributions. Events containing at least one electron or muon are classified based on their final state topology, and an automated search algorithm surveys the observed data for deviations from the prediction. The sensitivity of the search is validated using multiple methods. No significant deviations from the predictions have been observed. For a wide range of final state topologies, agreement is found between the data and the standard model simulation. This analysis complements dedicated search analyses by significantly expanding the range of final states covered using a model independent approach with the largest data set to date to probe phase space regions beyond the reach of previous general searches.Peer reviewe

Search for new particles in events with energetic jets and large missing transverse momentum in proton-proton collisions at root s=13 TeV

A search is presented for new particles produced at the LHC in proton-proton collisions at root s = 13 TeV, using events with energetic jets and large missing transverse momentum. The analysis is based on a data sample corresponding to an integrated luminosity of 101 fb(-1), collected in 2017-2018 with the CMS detector. Machine learning techniques are used to define separate categories for events with narrow jets from initial-state radiation and events with large-radius jets consistent with a hadronic decay of a W or Z boson. A statistical combination is made with an earlier search based on a data sample of 36 fb(-1), collected in 2016. No significant excess of events is observed with respect to the standard model background expectation determined from control samples in data. The results are interpreted in terms of limits on the branching fraction of an invisible decay of the Higgs boson, as well as constraints on simplified models of dark matter, on first-generation scalar leptoquarks decaying to quarks and neutrinos, and on models with large extra dimensions. Several of the new limits, specifically for spin-1 dark matter mediators, pseudoscalar mediators, colored mediators, and leptoquarks, are the most restrictive to date.Peer reviewe

Measurement of prompt open-charm production cross sections in proton-proton collisions at root s=13 TeV

The production cross sections for prompt open-charm mesons in proton-proton collisions at a center-of-mass energy of 13TeV are reported. The measurement is performed using a data sample collected by the CMS experiment corresponding to an integrated luminosity of 29 nb(-1). The differential production cross sections of the D*(+/-), D-+/-, and D-0 ((D) over bar (0)) mesons are presented in ranges of transverse momentum and pseudorapidity 4 < p(T) < 100 GeV and vertical bar eta vertical bar < 2.1, respectively. The results are compared to several theoretical calculations and to previous measurements.Peer reviewe

Probing effective field theory operators in the associated production of top quarks with a Z boson in multilepton final states at root s=13 TeV

Peer reviewe

Measurement of B-c(2S)(+) and B-c*(2S)(+) cross section ratios in proton-proton collisions at root s=13 TeV

Peer reviewe

Search for dark photons in Higgs boson production via vector boson fusion in proton-proton collisions at √s = 13 TeV

A search is presented for a Higgs boson that is produced via vector boson fusion and that decays to an undetected particle and an isolated photon. The search is performed by the CMS collaboration at the LHC, using a data set corresponding to an integrated luminosity of 130 fb−1, recorded at a center-of-mass energy of 13 TeV in 2016–2018. No significant excess of events above the expectation from the standard model background is found. The results are interpreted in the context of a theoretical model in which the undetected particle is a massless dark photon. An upper limit is set on the product of the cross section for production via vector boson fusion and the branching fraction for such a Higgs boson decay, as a function of the Higgs boson mass. For a Higgs boson mass of 125 GeV, assuming the standard model production rates, the observed (expected) 95% confidence level upper limit on the branching fraction is 3.5 (2.8)%. This is the first search for such decays in the vector boson fusion channel. Combination with a previous search for Higgs bosons produced in association with a Z boson results in an observed (expected) upper limit on the branching fraction of 2.9 (2.1)% at 95% confidence level