Three-dimensional observation and analysis of remineralization in dentinal caries lesions

The remineralization mechanism in dental caries lesions is not completely understood. This study reports on ultrastructural and chemical changes observed within arrested caries lesions. Carious human teeth were observed using scanning electron microscopy (SEM) and focused-ion-beam (FIB)-SEM. The crystals detected in the caries lesions were characterized by transmission electron microscopy (TEM), along with chemical element mapping using energy-dispersive spectroscopy (EDS)-STEM. FIB-SEM 3D reconstructions revealed a severely damaged dentin surface abundantly covered by bacteria. Although the dentin tubules were clogged up to a depth of 100 mu m, bacterial invasion into dentin tubules was not observed. TEM crystal analysis and EDS-STEM revealed the presence of Ca and P, as well as of Mg within the HAp crystals deposited inside the dentin tubules. It was concluded that extensive remineralization with deposition of Mg-HAp crystals had occurred in dentin tubules of caries-arrested dentin. Understanding the natural remineralization process is thought to be helpful for developing clinical biomimetic remineralization protocols

Long-term bonding to eroded dentin requires superficial bur preparation

Objectives: This study aims to evaluate the influence of different surface preparation techniques on long-term bonding effectiveness to eroded dentin. Materials and methods: Dentin specimens were eroded by pH cycling or were left untreated as control, respectively. Five different "preparation” techniques were applied: (1) cleaning with pumice, (2) air abrasion, (3) silicon polisher, (4) proxo-shape, and (5) diamond bur. The three-step etch-and-rinse adhesive OptiBond FL (O-FL; Kerr) and the mild two-step self-etch adhesive Clearfil SE Bond (C-SE; Kuraray) were evaluated. Micro-tensile bond strength was measured after water storage for 24h and 1year. Fracture analysis was performed by stereomicroscopy and SEM. Interfaces were characterized by TEM. Differences were statistically analyzed with a linear mixed effects model (α = 0.05). Results: Erosion reduced bond strength in all groups, but this effect was less prominent when eroded dentin was prepared by diamond bur. Storage lowered bond strength in almost all groups significantly, but this ageing effect was more prominent for the eroded surfaces than for non-eroded controls. Whereas after 1-year control specimens revealed superior bond strength with the three-step etch-and-rinse adhesive (O-FL), the mild two-step self-etch adhesive (C-SE) revealed a better 1-year bond strength to eroded dentin. The interface at eroded dentin appeared very prone to degradation as was shown by the increased amount of adhesive failures and by the silver infiltration detected by TEM. Conclusions and clinical relevance: Although a minimally invasive approach should clinically always be strived for, superficial preparation (or minimal roughening) with a diamond bur is recommendable for long-term bonding to eroded denti

Enamel loss and adhesive remnants following bracket removal and various clean-up procedures in vitro

This study evaluated the enamel loss and composite remnants after debonding and clean-up. The tested null hypothesis is that there are no differences between different polishing systems regarding removing composite remnants without damaging the tooth surface. Brackets were bonded to 75 extracted human molars and removed after a storage period of 100 hours. The adhesive remnant index (ARI) was evaluated. The clean-up was carried out with five different procedures: 1. carbide bur; 2. carbide bur and Brownie and Greenie silicone polishers; 3. carbide bur and Astropol polishers; 4. carbide bur and Renew polishers; and 5. carbide bur, Brownie, Greenie and PoGo polishers. Silicone impressions were made at baseline (T0) and after debonding (T1) and polishing (T2) to produce plaster replicas. The replicas were analysed with a three-dimensional laser scanner and measured with analytical software. Statistical analysis was performed with the Kruskal-Wallis test and pairwise Wilcoxon tests with Bonferroni-Holm adjustment (α = 0.05). Enamel breakouts after debonding were detectable in 27 per cent of all cases, with a mean volume loss of 0.02 mm3 (±0.03 mm3) and depth of 44.9 μm (±48.3 μm). The overall ARI scores was 3 with a few scores of 1 and 2. The composite remnants after debonding had a mean volume of 2.48 mm3 (±0.92 mm3). Mean volume loss due to polishing was 0.05 mm3 (±0.26 mm3) and the composite remnants had a mean volume of 0.22 mm3 (±0.32 mm3). There were no statistically significant differences in volumetric changes after polishing (P = 0.054) between the different clean-up methods. However, sufficient clean-up without enamel loss was difficult to achiev

Effects of biodiversity loss and restoration scenarios on tree-related ecosystem services

In landscapes worldwide, trees in forests and agricultural lands have important ecological functions. Their loss may have important consequences for the delivery of ecosystem services (ES) to local communities, even if individual trees have low conservation values. This study explores the effect of land use and land use change on the provisioning of tree-related ES in a mixed Afromontane landscape in Ethiopia. First, we mapped the current distribution of tree-related ES using indicator ES, which represent the most characteristic ES for different land use types. More ES were characteristic for indigenous forest and agroforest, compared to exotic forest, cropland, and rangeland. A scenario analysis was conducted on the effect of tree species loss and restoration (RES) on ES. Two ES indices, ES diversity and ES multifunctionality, were used to evaluate the ES supply. The different behavior of the two ES indices in the species loss scenarios suggests that rare species have distinct traits that provide specific ES, which could not be compensated by the remaining common species. In tree species-poor landscapes, local communities prefer multifunctional tree species and these keep the diversity of ES supply high. Overall, our findings demonstrate that future conservation and restoration programs in mixed landscapes should both protect a large diversity of tree species, including rare tree species, and promote multifunctional keyston species to ensure a long-term and diverse ES supply.EDITED BY Edmundo Barrio

Data Mining and Social Media for promotion and marketing in the Aerospace Industry

Data mining and social media is an innovative platform for the aerospace industry to focus, promote and market the industry in the upcoming economy. Data mining techniques allow the industry to build a comprehensive system that helps to make intelligent management decisions in a formal system. On the other hand Social Media is used as a tool to ensure maximum return by entering a hybrid media landscape, one where the rapid growth of Social Media complements and enhances the efficiency of the industry. By using trend analysis this research would showcase benefits that the industry will achieve by increasing their profit margins and market competiveness. This research mainly focuses on supporting the aerospace industry to build trust among customers and meeting demand specifications by using data mining techniques and social media platform

Tree identity rather than tree diversity drives earthworm communities in European forests

Given the key role of belowground biota on forest ecosystem functioning, it is important to identify the factors that influence their abundance and composition. However, the understanding of the ecological linkage between tree diversity and belowground biota is still insufficient. Here we investigated the influence of tree diversity (richness, True Shannon diversity index, functional diversity) and identity (proportion of evergreen leaf litter and leaf litter quality) on earthworm species richness and biomass at a continental and regional scale, using data from a Europe-wide forest research platform (FunDivEUROPE) spanning six major forest types. We found a marked tree identity effect at the continental scale, with proportion of evergreen leaf litter negatively affecting total earthworm biomass and species richness, as well as their biomass per functional group. Furthermore, there were clear litter quality effects with a latitudinal variation in trait-specific responses. In north and central Europe, earthworm biomass and species richness clearly increased with increasing litter nutrient concentrations (decreasing C:N ratio and increasing calcium concentration), whereas this influence of litter nutrients was absent or even reversed in southern Europe. In addition, although earthworms were unaffected by the number of tree species, tree diversity positively affected earthworm biomass at the continental scale through functional diversity of the leaf litter. By focusing on tree leaf litter traits, this study advanced our understanding of the mechanisms driving tree identity effects and supported previous findings that litter quality, as a proxy of tree identity, was a stronger driver of earthworm species richness and biomass than tree diversit

Real time assessment of surface interactions with a titanium passivation layer by surface plasmon resonance

Due to the high corrosion resistance and strength to density ratio titanium is widely used in industry, and also in a gamut of medical applications. Here we report for the first time on our development of a titanium passivation layer sensor that makes use of surface plasmon resonance (SPR). The deposited titanium metal layer on the sensor was passivated in air, similarly to titanium medical devices. Our "Ti-SPR sensor" enables analysis of biomolecule interactions with the passivated surface of titanium in real time. As a proof of concept, corrosion of a titanium passivation layer exposed to acid was monitored in real time. The Ti-SPR sensor can also accurately measure the time-dependence of protein adsorption onto the titanium passivation layer at sub-nanogram per square millimeter accuracy. Besides such SPR analyses, SPR imaging (SPRI) enables real time assessment of chemical surface processes that occur simultaneously at "multiple independent spots" on the Ti-SPR sensor, such as acid corrosion or adhesion of cells. Our Ti-SPR sensor will therefore be very useful to study titanium corrosion phenomena and biomolecular titanium-surface interactions with application in a broad range of industrial and biomedical fields

Three-year randomised clinical trial to evaluate the clinical performance, quantitative and qualitative wear patterns of hybrid composite restorations

The aim of the study was to compare the clinical performance, quantitative and qualitative wear patterns of conventional hybrid (Tetric Ceram), micro-filled hybrid (Gradia Direct Posterior) and nano-hybrid (Tetric EvoCeram, TEC) posterior composite restorations in a 3-year randomised clinical trial. Sixteen Tetric Ceram, 17 TEC and 16 Gradia Direct Posterior restorations were placed in human molars and evaluated at baseline, 6, 12, 24 and 36 months of clinical service according to US Public Health Service criteria. The gypsum replicas at each recall were used for 3D laser scanning to quantify wear, and the epoxy resin replicas were observed under scanning electron microscope to study the qualitative wear patterns. After 3 years of clinical service, the three hybrid restorative materials performed clinically well in posterior cavities. Within the observation period, the nano-hybrid and micro-hybrid restorations evolved better in polishability with improved surface gloss retention than the conventional hybrid counterpart. The three hybrid composites showed enamel-like vertical wear and cavity-size dependant volume loss magnitude. Qualitatively, while the micro-filled and nano-hybrid composite restorations exhibited signs of fatigue similar to the conventional hybrid composite restorations at heavy occlusal contact area, their light occlusal contact areas showed less surface pitting after 3 years of clinical service

Global maps of soil temperature

Research in global change ecology relies heavily on global climatic grids derived from estimates of air temperature in open areas at around 2 m above the ground. These climatic grids do not reflect conditions below vegetation canopies and near the ground surface, where critical ecosystem functions occur and most terrestrial species reside. Here, we provide global maps of soil temperature and bioclimatic variables at a 1-km² resolution for 0–5 and 5–15 cm soil depth. These maps were created by calculating the difference (i.e., offset) between in-situ soil temperature measurements, based on time series from over 1200 1-km² pixels (summarized from 8500 unique temperature sensors) across all the world’s major terrestrial biomes, and coarse-grained air temperature estimates from ERA5-Land (an atmospheric reanalysis by the European Centre for Medium-Range Weather Forecasts). We show that mean annual soil temperature differs markedly from the corresponding gridded air temperature, by up to 10°C (mean = 3.0 ± 2.1°C), with substantial variation across biomes and seasons. Over the year, soils in cold and/or dry biomes are substantially warmer (+3.6 ± 2.3°C) than gridded air temperature, whereas soils in warm and humid environments are on average slightly cooler (-0.7 ± 2.3°C). The observed substantial and biome-specific offsets emphasize that the projected impacts of climate and climate change on near-surface biodiversity and ecosystem functioning are inaccurately assessed when air rather than soil temperature is used, especially in cold environments. The global soil-related bioclimatic variables provided here are an important step forward for any application in ecology and related disciplines. Nevertheless, we highlight the need to fill remaining geographic gaps by collecting more in-situ measurements of microclimate conditions to further enhance the spatiotemporal resolution of global soil temperature products for ecological applications

Global maps of soil temperature

Research in global change ecology relies heavily on global climatic grids derived from estimates of air temperature in open areas at around 2 m above the ground. These climatic grids do not reflect conditions below vegetation canopies and near the ground surface, where critical ecosystem functions occur and most terrestrial species reside. Here, we provide global maps of soil temperature and bioclimatic variables at a 1-km2 resolution for 0–5 and 5–15 cm soil depth. These maps were created by calculating the difference (i.e. offset) between in situ soil temperature measurements, based on time series from over 1200 1-km2 pixels (summarized from 8519 unique temperature sensors) across all the world\u27s major terrestrial biomes, and coarse-grained air temperature estimates from ERA5-Land (an atmospheric reanalysis by the European Centre for Medium-Range Weather Forecasts). We show that mean annual soil temperature differs markedly from the corresponding gridded air temperature, by up to 10°C (mean = 3.0 ± 2.1°C), with substantial variation across biomes and seasons. Over the year, soils in cold and/or dry biomes are substantially warmer (+3.6 ± 2.3°C) than gridded air temperature, whereas soils in warm and humid environments are on average slightly cooler (−0.7 ± 2.3°C). The observed substantial and biome-specific offsets emphasize that the projected impacts of climate and climate change on near-surface biodiversity and ecosystem functioning are inaccurately assessed when air rather than soil temperature is used, especially in cold environments. The global soil-related bioclimatic variables provided here are an important step forward for any application in ecology and related disciplines. Nevertheless, we highlight the need to fill remaining geographic gaps by collecting more in situ measurements of microclimate conditions to further enhance the spatiotemporal resolution of global soil temperature products for ecological applications