Inhomogeneous gas model for electron mobility in high density neon gas

Experimental studies of electron mobilities in Neon as a function of the gas density have persistently shown mobilities up to an order of magnitude smaller than expected and predicted. A previously ignored mechanism (gas in--homogeneity which is negligible in the thermal mobilities for He and other gases) is found to reproduce the observed Neon mobilities accurately and simply at five temperatures with just one variable parameter. Recognizing that a gas is not a homogeneous medium, a variation in local density combined with the quantum multi--scattering theory, shifts the energy and cross section -- which in turn changes the collision probability and finally the mobilities. A lower density where a momentum transfer interaction occurs moves the mobility strongly in the same direction as the anomalous experiments. By going backwards from the observed mobilities, the collision frequency at each temperature and density is made to reproduce the experimental data by looking for the local (as opposed to average) density at which the (rare) momentum transfer interactions occur. These density deviations give a picture of the size and behavior of the wave packets for electron motion which looks very much like the often discussed wave function collapse.Comment: 18 pages, 5 figure

Electronic Properties of Ti Sites in Ziegler-Natta Catalysts

Although Ziegler-Natta (ZN) catalysts play a major role in the polyolefin market, a true understanding of their properties at the molecular level is still missing. In particular, there is a lack of knowledge on the electronic properties of Ti sites. Theoretical calculations predict that the electron density of the Ti sites in the precatalysts correlates with the activation energy for olefin insertion in the Ti-alkyl bond generated at these sites after activation by Al-alkyls. It is also well known that the effective charge on the Ti sites in the activated catalysts affects the olefin π-complexation. In this contribution, we exploit two electronic spectroscopies, UV-vis and Ti L2,3-edge near-edge X-ray absorption fine structure (NEXAFS), complemented with theoretical simulation to investigate three ZN precatalysts of increasing complexity (up to an industrial system) and the corresponding catalysts activated by triethylaluminum (TEAl). We provide compelling evidence for the presence of monomeric 6-fold-coordinated Ti4+ species in all of the precatalysts, which however differ in the effective charge on the Ti sites. We also unambiguously demonstrate that these sites are reduced by TEAl to two types of monomeric 5-coordinated Ti3+, either alkylated or not, and that the former are involved in ethylene polymerization. In addition, small TiCl3 clusters are formed in the industrial catalyst, likely due to the occurrence of severe reducing conditions within the catalyst pores. These data prove the potential of these two techniques, coupled with simulation, in providing an accurate description of the electronic properties of heterogeneous ZN catalysts

Larger value for H0 by an evolving gravitational constant

We provide further evidence that a massless cosmological scalar field with a nonminimal coupling to the Ricci curvature of the type M 2 pl ( 1 + ξ σ n / M n pl ) alleviates the existing tension between local measurements of the Hubble constant and its inference from cosmic microwave background anisotropies and baryonic acoustic oscillations data in the presence of a cosmological constant. In these models, the expansion history is modified compared to Λ CDM at early time, mimicking a change in the effective number of relativistic species, and gravity weakens after matter-radiation equality. Compared to Λ CDM , a quadratic ( n = 2 ) coupling increases the Hubble constant when Planck 2018 (alone or in combination with BAO and SH0ES) measurements data are used in the analysis. Negative values of the coupling, for which the scalar field decreases, seem favored and consistency with the Solar System can be naturally achieved for a large portion of the parameter space without the need of any screening mechanism. We show that our results are robust to the choice of n , also presenting the analysis for n = 4

the duality of uio 67 pt mofs connecting treatment conditions and encapsulated pt species by operando xas

XAS study of Pt-functionalized UiO-67 MOFs shows that 2 types of catalytically active sites can be formed in MOF cavities isolated Pt-complexes and Pt nanoparticles

Identifying Defects in Li-Ion Cells Using Ultrasound Acoustic Measurements

Identification of the state-of-health (SoH) of Li-ion cells is a vital tool to protect operating battery packs against accelerated degradation and failure. This is becoming increasingly important as the energy and power densities demanded by batteries and the economic costs of packs increase. Here, ultrasonic time-of-flight analysis is performed to demonstrate the technique as a tool for the identification of a range of defects and SoH in Li-ion cells. Analysis of large, purpose-built defects across multiple length scales is performed in pouch cells. The technique is then demonstrated to detect a microscale defect in a commercial cell, which is validated by examining the acoustic transmission signal through the cell. The location and scale of the defects are confirmed using X-ray computed tomography, which also provides information pertaining to the layered structure of the cells. The demonstration of this technique as a methodology for obtaining direct, non-destructive, depth-resolved measurements of the condition of electrode layers highlights the potential application of acoustic methods in real-time diagnostics for SoH monitoring and manufacturing processes

tuning pt and cu sites population inside functionalized uio 67 mof by controlling activation conditions

The exceptional thermal and chemical stability of the UiO-66, -67 and -68 classes of isostructural MOFs [J. Am. Chem. Soc., 2008, 130, 13850] makes them ideal materials for functionalization purposes aimed at introducing active centres for potential application in heterogeneous catalysis. We previously demonstrated that a small fraction (up to 10%) of the linkers in the UiO-67 MOF can be replaced by bipyridine-dicarboxylate (bpydc) moieties exhibiting metal-chelating ability and enabling the grafting of Pt(ii) and Pt(iv) ions in the MOF framework [Chem. Mater., 2015, 27, 1042] upon interaction with PtCl2 or PtCl4 precursors. Herein we extend this functionalization approach in two directions. First, we show that by controlling the activation of the UiO-67-Pt we can move from a material hosting isolated Pt(ii) sites anchored to the MOF framework with Pt(ii) exhibiting two coordination vacancies (potentially interesting for C–H bond activation) to the formation of very small Pt nanoparticles hosted inside the MOF cavities (potentially interesting for hydrogenation reactions). The second direction consists of the extension of the approach to the insertion of Cu(ii), obtained via interaction with CuCl2, and exhibiting interesting redox properties. All materials have been characterized by in situ X-ray absorption spectroscopy at the Pt L3- and Cu K-edges

Stochastic overall equipment effectiveness

International audienceThis paper focuses on the Overall Equipment Effectiveness (OEE), a key performance indicator typically adopted to support Lean Manufacturing and Total Productive Maintenance. Unfortunately, being a deterministic metric, the OEE only provides a static representation of a process, but fails to capture the real variability of manufacturing performances. To take into account the stochastic nature of the OEE, an approximated procedure based on the application of the Central Limit Theorem is presented: the OEE is considered as a stochastic random variable and its probability density function (pdf) is generated through the aggregation of the pdf of the basic causes of waste. Notwithstanding its approximated nature, the procedure can be applied in most practical cases, since the accuracy is assured provided that the average OEE is lower than 90% and the variability of the losses is high. The validity of the approach has been also confirmed by an industrial application included in the paper. Obtained results demonstrate that the Stochastic OEE can help in battling variation, for it allows to identify the hidden losses that account for most of the variability and to estimate the impacts of potential corrective actions in terms of both efficiency and efficacy

First simultaneous optical/near-infrared imaging of an X-ray selected, high-redshift cluster of galaxies with GROND: the galaxy population of XMMU J0338.7+0030 at z=1.1

The XMM-Newton Distant Cluster Project is a serendipitous survey for clusters of galaxies at redshifts z>=0.8 based on deep archival XMM-Newton observations. ... Low-significance candidate high-z clusters are followed up with the seven-channel imager GROND (Gamma-Ray Burst Optical and Near-Infrared Detector) that is mounted at a 2m-class telescope. ... The test case is XMMU J0338.7+0030, suggested to be at z~1.45+/-0.15 from the analysis of the z-H vs H colour-magnitude diagram obtained from the follow-up imaging. Later VLT-FORS2 spectroscopy enabled us to identify four members, which set this cluster at z=1.097+/-0.002. To reach a better knowledge of its galaxy population, we observed XMMU J0338.7+0030 with GROND for about 6 hr. The publicly available photo-z code le Phare was used. The Ks-band number counts of the non-stellar sources out of the 832 detected down to z'~26 AB-mag in the 3.9x4.3 square arcmin region of XMMU J0338.7+0030 imaged at all GROND bands clearly exceed those computed in deep fields/survey areas at ~20.5 - 22.5 AB-mag. The photo-z's of the three imaged spectroscopic members yield z=1.12+/-0.09. The spatial distribution and the properties of the GROND sources with a photo-z in the range 1.01 - 1.23 confirm the correspondence of the X-ray source with a galaxy over-density at a significance of at least 4.3 sigma. Candidate members that are spectro-photometrically classified as elliptical galaxies define a red locus in the i'-z' vs z' colour-magnitude diagram that is consistent with the red sequence of the cluster RDCS J0910+5422 at z=1.106. XMMU J0338.7+0030 hosts also a population of bluer late-type spirals and irregulars. The starbursts among the photometric members populate both loci, consistently with previous results. The analysis of the available data set indicates that XMMU J0338.7+0030 is a low-mass cluster (M_200 ~ 1E14 M_sun) at z=1.1. (Abridged)Comment: accepted for publication in Astronomy & Astrophysics Main Journal, 27 pages, 24 figures, 1 tabl

Identifying Defects in Li-Ion Cells Using Ultrasound Acoustic Measurements

Identification of the state-of-health (SoH) of Li-ion cells is a vital tool to protect operating battery packs against accelerated degradation and failure. This is becoming increasingly important as the energy and power densities demanded by batteries and the economic costs of packs increase. Here, ultrasonic time-of-flight analysis is performed to demonstrate the technique as a tool for the identification of a range of defects and SoH in Li-ion cells. Analysis of large, purpose-built defects across multiple length scales is performed in pouch cells. The technique is then demonstrated to detect a microscale defect in a commercial cell, which is validated by examining the acoustic transmission signal through the cell. The location and scale of the defects are confirmed using X-ray computed tomography, which also provides information pertaining to the layered structure of the cells. The demonstration of this technique as a methodology for obtaining direct, non-destructive, depth-resolved measurements of the condition of electrode layers highlights the potential application of acoustic methods in real-time diagnostics for SoH monitoring and manufacturing processes