238 research outputs found
Recommended from our members
Can Cavitation Be Anticipated?
The major problem with cavitation in pumps and hydraulic systems is that there is no effective (conventional) method for detecting or predicting its inception. The traditional method of recognizing cavitation in a pump is to declare the event occurring when the total head drops by some arbitrary value (typically 3%) in response to a pressure reduction at the pump inlet. However, the device is already seriously cavitating when this happens. What is actually needed is a practical method to detect impending rather than incipient cavitation. Whereas the detection of incipient cavitation requires the detection of features just after cavitation starts, the anticipation of cavitation requires the detection and identification of precursor features just before it begins. Two recent advances that make this detection possible. The first is acoustic sensors with a bandwidth of 1 MHz and a dynamic range of 80 dB that preserve the fine details of the features when subjected to coarse vibrations. The second is the application of Bayesian parameter estimation which makes it possible to separate weak signals, such as those present in cavitation precursors, from strong signals, such as pump vibration. Bayesian parameter estimation derives a model based on cavitation hydrodynamics and produces a figure of merit of how well it fits the acquired data. Applying this model to an anticipatory engine should lead to a reliable method of anticipating cavitation before it occurs. This paper reports the findings of precursor features using high-performance sensors and Bayesian analysis of weak acoustic emissions in the 100-1000kHz band from an experimental flow loop
Quantifying the heart of darkness with GHALO - a multi-billion particle simulation of our galactic halo
We perform a series of simulations of a Galactic mass dark matter halo at
different resolutions, our largest uses over three billion particles and has a
mass resolution of 1000 M_sun. We quantify the structural properties of the
inner dark matter distribution and study how they depend on numerical
resolution. We can measure the density profile to a distance of 120 pc (0.05%
of R_vir) where the logarithmic slope is -0.8 and -1.4 at (0.5% of R_vir). We
propose a new two parameter fitting function that has a linearly varying
logarithmic density gradient which fits the GHALO and VL2 density profiles
extremely well. Convergence in the density profile and the halo shape scales as
N^(-1/3), but the shape converges at a radius three times larger at which point
the halo becomes more spherical due to numerical resolution. The six
dimensional phase-space profile is dominated by the presence of the
substructures and does not follow a power law, except in the smooth
under-resolved inner few kpc.Comment: 6 pages, 4 figures, submitted to MNRAS Letters, for full sized
images, see http://www.itp.uzh.ch/news.htm
The Halo Shape and Evolution of Polar Disc Galaxies
We examine the properties and evolution of a simulated polar disc galaxy.
This galaxy is comprised of two orthogonal discs, one of which contains old
stars (old stellar disc), and the other, containing both younger stars and the
cold gas (polar disc) of the galaxy. By exploring the shape of the inner region
of the dark matter halo, we are able to confirm that the halo shape is a oblate
ellipsoid flattened in the direction of the polar disc. We also note that there
is a twist in the shape profile, where the innermost 3 kpc of the halo flattens
in the direction perpendicular to the old disc, and then aligns with the polar
disc out until the virial radius. This result is then compared to the halo
shape inferred from the circular velocities of the two discs. We also use the
temporal information of the simulation to track the system's evolution, and
identify the processes which give rise to this unusual galaxy type. We confirm
the proposal that the polar disc galaxy is the result of the last major merger,
where the angular moment of the interaction is orthogonal to the angle of the
infalling gas. This merger is followed by the resumption of coherent gas
infall. We emphasise that the disc is rapidly restored after the major merger
and that after this event the galaxy begins to tilt. A significant proportion
of the infalling gas comes from filaments. This infalling gas from the filament
gives the gas its angular momentum, and, in the case of the polar disc galaxy,
the direction of the gas filament does not change before or after the last
major merger.Comment: Accepted for publication in MNRAS; 14 pages; 14 figure
The interaction of dark matter cusp with the baryon component in disk galaxies
In this paper we examine the effect of the formation and evolution of the
disk galaxy on the distribution of dark halo matter. We have made simulations
of isolated dark matter (DM) halo and two component (DM + baryons). N-body
technique was used for stellar and DM particles and TVD MUSCL scheme for
gas-dynamic simulations. The simulations include the processes of star
formation, stellar feedback, heating and cooling of the interstellar medium.
The results of numerical experiments with high spatial resolution let us to
conclude in two main findings. First, accounting of star formation and
supernova feedback resolves the so-called problem of cusp in distribution of
dark matter predicted by cosmological simulations. Second, the interaction of
dark matter with dynamic substructures of stellar and gaseous galactic disk
(e.g., spiral waves, bar) has an impact on the shape of the dark halo. In
particular, the in-plane distribution of dark matter is more symmetric in runs,
where the baryonic component was taken into account.Comment: 7 pages, 6 figure
Quadruple-peaked spectral line profiles as a tool to constrain gravitational potential of shell galaxies
Stellar shells observed in many giant elliptical and lenticular as well as a
few spiral and dwarf galaxies, presumably result from galaxy mergers.
Line-of-sight velocity distributions of the shells could, in principle, if
measured with a sufficiently high S/N, constitute one of methods to constrain
the gravitational potential of the host galaxy. Merrifield & Kuijken (1998)
predicted a double-peaked line profile for stationary shells resulting from a
nearly radial minor merger. In this paper, we aim at extending their analysis
to a more realistic case of expanding shells, inherent to the merging process,
whereas we assume the same type of merger and the same orbital geometry. We use
analytical approach as well as test particle simulations to predict the
line-of-sight velocity profile across the shell structure. Simulated line
profiles are convolved with spectral PSFs to estimate the peak detectability.
The resulting line-of-sight velocity distributions are more complex than
previously predicted due to non-zero phase velocity of the shells. In
principle, each of the Merrifield & Kuijken (1998) peaks splits into two,
giving a quadruple-peaked line profile, which allows more precise determination
of the potential of the host galaxy and, moreover, contains additional
information. We find simple analytical expressions that connect the positions
of the four peaks of the line profile and the mass distribution of the galaxy,
namely the circular velocity at the given shell radius and the propagation
velocity of the shell. The analytical expressions were applied to a
test-particle simulation of a radial minor merger and the potential of the
simulated host galaxy was successfully recovered. The shell kinematics can thus
become an independent tool to determine the content and distribution of the
dark matter in shell galaxies, up to ~100 kpc from the center of the host
galaxy.Comment: 15 pages, 16 figures | v2: accepted for publication in A&A, minor
language correction
School health implementation tools: a mixed methods evaluation of factors influencing their use
Abstract Background The U.S. Centers for Disease Control and Prevention (CDC) develops tools to support implementation of evidence-based interventions for school health. To advance understanding of factors influencing the use of these implementation tools, we conducted an evaluation of state, school district, and local school staffs’ use of four CDC tools to support implementation of physical activity, nutrition, health education, and parent engagement. Two frameworks guided the evaluation: Interactive Systems Framework (ISF) for Dissemination and Implementation and Consolidated Framework for Implementation Research (CFIR). Methods The evaluation applied a mixed methods, cross-sectional design that included online surveys (n = 69 state staff from 43 states), phone interviews (n = 13 state staff from 6 states), and in-person interviews (n = 90 district and school staff from 8 districts in 5 states). Descriptive analyses were applied to surveys and content analysis to interviews. Results The survey found that the majority of state staff surveyed was aware of three of the CDC tools but most were knowledgeable and confident in their ability to use only two. These same two tools were the ones for which states were most likely to have provided training and technical assistance in the past year. Interviews provided insight into how tools were used and why use varied, with themes organized within the ISF domain “support strategies” (e.g., training, technical assistance) and four CFIR domains: (1) characteristics of tools, (2) inner setting, (3) outer setting, and (4) individuals. Overall, tools were valued for the credibility of their source (CDC) and evidence strength and quality. Respondents reported that tools were too complex for use by school staff. However, if tools were adaptable and compatible with inner and outer setting factors, state and district staff were willing and able to adapt tools for school use. Conclusions Implementation tools are essential to supporting broad-scale implementation of evidence-based interventions. This study illustrates how CFIR and ISF might be applied to evaluate factors influencing tools’ use and provides recommendations for designing tools to fit within the multi-tiered systems involved in promoting, supporting, and implementing evidence-based interventions in schools. Findings have relevance for the design of implementation tools for use by other multi-tiered systems
Dark Matter Halo Environment for Primordial Star Formation
We study the statistical properties (such as shape and spin) of high-z halos
likely hosting the first (PopIII) stars with cosmological simulations including
detailed gas physics. In the redshift range considered () the
average sphericity is , and for more than 90% of halos the
triaxiality parameter is , showing a clear preference for
oblateness over prolateness. Larger halos in the simulation tend to be both
more spherical and prolate: we find and , with and at z = 11.
The spin distributions of dark matter and gas are considerably different at
, with the baryons rotating slower than the dark matter. At lower
redshift, instead, the spin distributions of dark matter and gas track each
other almost perfectly, as a consequence of a longer time interval available
for momentum redistribution between the two components. The spin of both the
gas and dark matter follows a lognormal distribution, with a mean value at z=16
of , virtually independent of halo mass. This is in good
agreement with previous studies. Using the results of two feedback models (MT1
and MT2) by McKee & Tan (2008) and mapping our halo spin distribution into a
PopIII IMF, we find that at high- the IMF closely tracks the spin lognormal
distribution. Depending on the feedback model, though, the distribution can be
centered at (MT1) or (MT2). At later
times, model MT1 evolves into a bimodal distribution with a second prominent
peak located at as a result of the non-linear relation between
rotation and halo mass. We conclude that the dark matter halo properties might
be a key factor shaping the IMF of the first stars.Comment: 10 pages, 6 figures, accepted for publication in MNRA
Intrinsic galaxy shapes and alignments I: Measuring and modelling COSMOS intrinsic galaxy ellipticities
The statistical properties of the ellipticities of galaxy images depend on
how galaxies form and evolve, and therefore constrain models of galaxy
morphology, which are key to the removal of the intrinsic alignment
contamination of cosmological weak lensing surveys, as well as to the
calibration of weak lensing shape measurements. We construct such models based
on the halo properties of the Millennium Simulation and confront them with a
sample of 90,000 galaxies from the COSMOS Survey, covering three decades in
luminosity and redshifts out to z=2. The ellipticity measurements are corrected
for effects of point spread function smearing, spurious image distortions, and
measurement noise. Dividing galaxies into early, late, and irregular types, we
find that early-type galaxies have up to a factor of two lower intrinsic
ellipticity dispersion than late-type galaxies. None of the samples shows
evidence for redshift evolution, while the ellipticity dispersion for late-type
galaxies scales strongly with absolute magnitude at the bright end. The
simulation-based models reproduce the main characteristics of the intrinsic
ellipticity distributions although which model fares best depends on the
selection criteria of the galaxy sample. We observe fewer close-to-circular
late-type galaxy images in COSMOS than expected for a sample of randomly
oriented circular thick disks and discuss possible explanations for this
deficit.Comment: 18 pages, 8 figures; updated simulations and galaxy sample
definition, more galaxy samples analysed; matches version published in MNRA
- …