426 research outputs found
Epidemiology and integrated control of Potato Late Blight in Europe
Phytophthora infestans, the causal agent of late blight, is a major threat to potato production in northwestern Europe. Before 1980, the worldwide population of P. infestans outside Mexico appeared to be asexual and to consist of a single clonal lineage of A1 mating type characterized by a single genotype. It is widely believed that new strains migrated into Europe in 1976 and that this led to subsequent population changes including the introduction of the A2 mating type. The population characteristics of recently collected isolates in NW Europe show a diverse population including both mating types, sexual reproduction and oospores, although differences are observed between regions. Although it is difficult to find direct evidence that new strains are more aggressive, there are several indications from experiments and field epidemics that the aggressiveness of P. infestans has increased in the past 20 years. The relative importance of the different primary inoculum sources and specific measures for reducing their role, such as covering dumps with plastic and preventing seed tubers from becoming infected, is described for the different regions. In NW Europe, varieties with greater resistance tend not to be grown on a large scale. From the growerâs perspective, the savings in fungicide input that can be achieved with these varieties are not compensated by the higher (perceived) risk of blight. Fungicides play a crucial role in the integrated control of late blight. The spray strategies in NW Europe and a table of the specific attributes of the most important fungicides in Europe are presented. The development and use of decision support systems (DSSs) in NW Europe are described. In The Netherlands, it is estimated that almost 40% of potato growers use recommendations based on commercially available DSS. In the Nordic countries, a new DSS concept with a fixed 7-day spray interval and a variable dose rate is being tested. In the UK, commercially available DSSs are used for c. 8% of the area. The validity of Smith Periods for the new population of P. infestans in the UK is currently being evaluated
Coating quality as affected by core particle segregation in fluidized bed processing
[EN] Fluidized bed coating is an important technique in the food powder industry, where often particles of a wide size distribution are dealt with. In this paper, glass beads of different particle size distribution were coated with sodium caseinate in a top-spray fluid bed unit. Positron Emission Particle Tracking (PEPT) was used to visualize and quantify the particle motion in the fluidized bed. Confocal Laser Scanning Microscopy combined with image analysis were used to investigate the effect of core particle size and its distribution on the thickness and quality of the coating. Particle size significantly affected the thickness and quality of the coating, due to differences in the corresponding fluidization patterns, as corroborated by PEPT observations. As the particle size distribution becomes narrower, segregation is less likely to occur. This results in a thicker coating which is, however, less uniform compared to when cores of a wider particle size distribution are spray coated. (C) 2012 Elsevier Ltd. All rights reserved.The authors wish to thank the financial support received from the Fund for Scientific Research-Flanders (Belgium) (F.W.O.-Vlaanderen), as well as from the Programa de Apoyo a la Investigacion y Desarrollo from the Universitat Politecnica de Valencia.Atarés Huerta, LM.; Depypere, F.; Pieters, J.; Dewettinck, K. (2012). Coating quality as affected by core particle segregation in fluidized bed processing. Journal of Food Engineering. 113(3):415-421. doi:10.1016/j.jfoodeng.2012.06.012S415421113
Connecting Numerical Relativity and Data Analysis of Gravitational Wave Detectors
Gravitational waves deliver information in exquisite detail about
astrophysical phenomena, among them the collision of two black holes, a system
completely invisible to the eyes of electromagnetic telescopes. Models that
predict gravitational wave signals from likely sources are crucial for the
success of this endeavor. Modeling binary black hole sources of gravitational
radiation requires solving the Eintein equations of General Relativity using
powerful computer hardware and sophisticated numerical algorithms. This
proceeding presents where we are in understanding ground-based gravitational
waves resulting from the merger of black holes and the implications of these
sources for the advent of gravitational-wave astronomy.Comment: Appeared in the Proceedings of 2014 Sant Cugat Forum on Astrophysics.
Astrophysics and Space Science Proceedings, ed. C.Sopuerta (Berlin:
Springer-Verlag
Next-to-leading BFKL phenomenology of forward-jet cross sections at HERA
We show that the forward-jet measurements performed at HERA allow for a
detailed study of corrections due to next-to-leading logarithms (NLL) in the
Balitsky-Fadin-Kuraev-Lipatov (BFKL) approach. While the description of the
d\sigma/dx data shows small sensitivity to NLL-BFKL corrections, these can be
tested by the triple differential cross section d\sigma/dxdk_T^2dQ^2 recently
measured. These data can be successfully described using a
renormalization-group improved NLL kernel while the standard
next-to-leading-order QCD or leading-logarithm BFKL approaches fail to describe
the same data in the whole kinematic range. We present a detailed analysis of
the NLL scheme and renormalization-scale dependences and also discuss the
photon impact factors.Comment: 15 pages, 9 figures, new title, NLL-BFKL saddle-point approximation
replaced by exact integratio
PYTHIA 6.4 Physics and Manual
The PYTHIA program can be used to generate high-energy-physics `events', i.e.
sets of outgoing particles produced in the interactions between two incoming
particles. The objective is to provide as accurate as possible a representation
of event properties in a wide range of reactions, within and beyond the
Standard Model, with emphasis on those where strong interactions play a role,
directly or indirectly, and therefore multihadronic final states are produced.
The physics is then not understood well enough to give an exact description;
instead the program has to be based on a combination of analytical results and
various QCD-based models. This physics input is summarized here, for areas such
as hard subprocesses, initial- and final-state parton showers, underlying
events and beam remnants, fragmentation and decays, and much more. Furthermore,
extensive information is provided on all program elements: subroutines and
functions, switches and parameters, and particle and process data. This should
allow the user to tailor the generation task to the topics of interest.Comment: 576 pages, no figures, uses JHEP3.cls. The code and further
information may be found on the PYTHIA web page:
http://www.thep.lu.se/~torbjorn/Pythia.html Changes in version 2: Mistakenly
deleted section heading for "Physics Processes" reinserted, affecting section
numbering. Minor updates to take into account referee comments and new colour
reconnection option
A matching of matrix elements and parton showers
We propose a simple scheme to start a parton-shower evolution description
from a given jet configuration in annihilation events. This allows a
convenient combination of the full angular information content of matrix
elements with the detailed sub-jet structure of parton showers, and should give
a realistic overall description of event properties. Explicit studies with this
hybrid approach are presented for the four-jet case, as a simple testing ground
of the ideas.Comment: 1+8 pages, LaTeX2e, 5 postscript figures include
Asymmetries between the production of D+ and D- mesons from 500 GeV/c pi- nucleon interactions as a function of xF and pt**2
We present asymmetries between the production of D+ and D- mesons in Fermilab
experiment E791 as a function of xF and pt**2. The data used here consist of
74,000 fully-reconstructed charmed mesons produced by a 500 GeV/c pi- beam on C
and Pt foils. The measurements are compared to results of models which predict
differences between the production of heavy-quark mesons that have a light
quark in common with the beam (leading particles) and those that do not
(non-leading particles). While the default models do not agree with our data,
we can reach agreement with one of them, PYTHIA, by making a limited number of
changes to parameters used
Genuine Correlations of Like-Sign Particles in Hadronic Z0 Decays
Correlations among hadrons with the same electric charge produced in Z0
decays are studied using the high statistics data collected from 1991 through
1995 with the OPAL detector at LEP. Normalized factorial cumulants up to fourth
order are used to measure genuine particle correlations as a function of the
size of phase space domains in rapidity, azimuthal angle and transverse
momentum. Both all-charge and like-sign particle combinations show strong
positive genuine correlations. One-dimensional cumulants initially increase
rapidly with decreasing size of the phase space cells but saturate quickly. In
contrast, cumulants in two- and three-dimensional domains continue to increase.
The strong rise of the cumulants for all-charge multiplets is increasingly
driven by that of like-sign multiplets. This points to the likely influence of
Bose-Einstein correlations. Some of the recently proposed algorithms to
simulate Bose-Einstein effects, implemented in the Monte Carlo model PYTHIA,
are found to reproduce reasonably well the measured second- and higher-order
correlations between particles with the same charge as well as those in
all-charge particle multiplets.Comment: 26 pages, 6 figures, Submitted to Phys. Lett.
Bose-Einstein Correlations of Neutral and Charged Pions in Hadronic Z Decays
Bose-Einstein correlations of both neutral and like-sign charged pion pairs
are measured in a sample of 2 million hadronic Z decays collected with the L3
detector at LEP. The analysis is performed in the four-momentum difference
range 300 MeV < Q < 2 GeV. The radius of the neutral pion source is found to be
smaller than that of charged pions. This result is in qualitative agreement
with the string fragmentation model
- âŠ