Using Laser Point Scanning Thermography for Quality Monitoring of Products Made of Composite Materials

Introduction. Control of the presence of subsurface defects in products from composite materials is necessary for verification of products after release from production and in the process of operation. Aim of the Study. The purpose of the presented work is to estimate the parameters of subsurface defects using local laser thermography, suitable for quality control of both small objects and suspicious areas of large objects with curved surfaces. Materials and Methods. The laboratory setup on which this work was carried out includes a robotic arm, a COX CG640 thermal imager and a 3 W laser. The method was tested on a fiberglass sample with introduced delamination defect simulations located at different depths below the surface. By means of computer modeling rational parameters of thermographic control were selected, providing reliable detection of the defect at a depth of up to 3 mm under the surface of the composite sample. Results. Numerical modeling of surface temperature field induced by moving focused laser beam was carried out using COMSOL software package. It showed that laser beam with 3 W power moving at 5 mm/s provided the thermal contrast sufficient to detect the defects at the depth up to 3 mm. The obtained experimental data are in satisfactory agreement with numerical modeling both qualitatively and quantitatively. Experimental data were used to construct a regression model for determining defect depth based on the maximal thermal contrast and the time interval between heating and the contrast maximum. Discussion and Conclusion. The results obtained in this work allow us to propose a technique for detecting defects in fiberglass plastics and estimating their depth. The coefficient of determination for the obtained regression model was found to be equal to 0.95, and the mean square error of the metric was no more than 0.016 mm2. The use of a robotic arm to scan objects will make it possible to investigate objects with complex curved surfaces

Chronic fibrosing progressing interstitial lung disease: a decision of Multidisciplinary Expert Board

The natural course of some interstitial lung diseases (ILD) is characterized by progressive fibrosing phenotype resembling idiopathic pulmonary fibrosis (IPF). Until recently, the antifibrotic drug nintedanib was approved for treatment of the only fibrosing ILD which was IPF. A new indication for this drug which has been registered in Russian Federation in 2021 includes other fibrosing ILDs with progressive phenotype (PF-ILDs) and ILD associated with systemic scleroderma (SS-ILD). The aim of this publication is to describe general considerations of the decision of Multidisciplinary Expert Board on diagnosis and treatment of PF-ILDs including SS-ILD. Results. According to the extension in nintedanib use mentioned above, the Expert Board created an algorithm for diagnosis and treatment of patients with PF-ILDs and criteria for nuntedanib administration in PF-ILDs. Conclusion. Antifibrotic therapy is needed for patients with PF-ILDs with the failure of the stanrard therapy. In those patients antifibrotic treatment should be initiated as early as possible to better preserve the lung functionПри формировании фибротических изменений в легких многие интерстициальные заболевания легких (ИЗЛ) могут приобретать прогрессирующее течение. По прогнозу выживаемости, риску летальности и обострений такой фенотип ИЗЛ при отсутствии антифибротической терапии очень близок к идиопатическому легочному фиброзу. В 2020 г. в Российской Федерации разрешено использование антифибротического препарата нинтеданиб при фиброзирующих ИЗЛ с прогрессирующим фиброзным фенотипом (ПФФ) и при ИЗЛ, связанных с системной склеродермией. Целью работы Междисциплинарного Совета экспертов явилось ознакомление с основными положениями резолюции Междисциплинарного Совета экспертов о диагностике и лечении ИЗЛ ПФФ. Результаты. В декабре 2020 г. состоялся Междисциплинарный Совет экспертов, по результатам работы которого разработаны алгоритм диагностики и ведения пациентов с ИЗЛ ПФФ и критерии отбора больных для назначения антифибротической терапии. Заключение. Установлено, что в случае когда при стандартной терапии ИЗЛ ПФФ клиническое состояние пациента и легочная функция и / или фибротические изменения в легких по данным компьютерной томографии высокого разрешения не стабилизируются, показана антифибротическая терапия нинтеданибом. Начиная антифибротическую терапию в возможно более ранние сроки заболевания, можно замедлить прогрессирующее снижение легочной функции при более сохранных исходных показателях

Measurement of prompt open-charm production cross sections in proton-proton collisions at root s=13 TeV

The production cross sections for prompt open-charm mesons in proton-proton collisions at a center-of-mass energy of 13TeV are reported. The measurement is performed using a data sample collected by the CMS experiment corresponding to an integrated luminosity of 29 nb(-1). The differential production cross sections of the D*(+/-), D-+/-, and D-0 ((D) over bar (0)) mesons are presented in ranges of transverse momentum and pseudorapidity 4 < p(T) < 100 GeV and vertical bar eta vertical bar < 2.1, respectively. The results are compared to several theoretical calculations and to previous measurements.Peer reviewe

Measurement of t(t)over-bar normalised multi-differential cross sections in pp collisions at root s=13 TeV, and simultaneous determination of the strong coupling strength, top quark pole mass, and parton distribution functions

Peer reviewe

Measurement of the top quark forward-backward production asymmetry and the anomalous chromoelectric and chromomagnetic moments in pp collisions at √s = 13 TeV

Abstract The parton-level top quark (t) forward-backward asymmetry and the anomalous chromoelectric (d̂ t) and chromomagnetic (μ̂ t) moments have been measured using LHC pp collisions at a center-of-mass energy of 13 TeV, collected in the CMS detector in a data sample corresponding to an integrated luminosity of 35.9 fb−1. The linearized variable AFB(1) is used to approximate the asymmetry. Candidate t t ¯ events decaying to a muon or electron and jets in final states with low and high Lorentz boosts are selected and reconstructed using a fit of the kinematic distributions of the decay products to those expected for t t ¯ final states. The values found for the parameters are AFB(1)=0.048−0.087+0.095(stat)−0.029+0.020(syst),μ̂t=−0.024−0.009+0.013(stat)−0.011+0.016(syst), and a limit is placed on the magnitude of | d̂ t| &lt; 0.03 at 95% confidence level. [Figure not available: see fulltext.

Development and validation of HERWIG 7 tunes from CMS underlying-event measurements

This paper presents new sets of parameters (“tunes”) for the underlying-event model of the HERWIG7 event generator. These parameters control the description of multiple-parton interactions (MPI) and colour reconnection in HERWIG7, and are obtained from a fit to minimum-bias data collected by the CMS experiment at s=0.9, 7, and 13Te. The tunes are based on the NNPDF 3.1 next-to-next-to-leading-order parton distribution function (PDF) set for the parton shower, and either a leading-order or next-to-next-to-leading-order PDF set for the simulation of MPI and the beam remnants. Predictions utilizing the tunes are produced for event shape observables in electron-positron collisions, and for minimum-bias, inclusive jet, top quark pair, and Z and W boson events in proton-proton collisions, and are compared with data. Each of the new tunes describes the data at a reasonable level, and the tunes using a leading-order PDF for the simulation of MPI provide the best description of the dat

MUSiC : a model-unspecific search for new physics in proton-proton collisions at root s=13TeV

Results of the Model Unspecific Search in CMS (MUSiC), using proton-proton collision data recorded at the LHC at a centre-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 35.9 fb(-1), are presented. The MUSiC analysis searches for anomalies that could be signatures of physics beyond the standard model. The analysis is based on the comparison of observed data with the standard model prediction, as determined from simulation, in several hundred final states and multiple kinematic distributions. Events containing at least one electron or muon are classified based on their final state topology, and an automated search algorithm surveys the observed data for deviations from the prediction. The sensitivity of the search is validated using multiple methods. No significant deviations from the predictions have been observed. For a wide range of final state topologies, agreement is found between the data and the standard model simulation. This analysis complements dedicated search analyses by significantly expanding the range of final states covered using a model independent approach with the largest data set to date to probe phase space regions beyond the reach of previous general searches.Peer reviewe

Search for Physics beyond the Standard Model in Events with Overlapping Photons and Jets

Results are reported from a search for new particles that decay into a photon and two gluons, in events with jets. Novel jet substructure techniques are developed that allow photons to be identified in an environment densely populated with hadrons. The analyzed proton-proton collision data were collected by the CMS experiment at the LHC, in 2016 at root s = 13 TeV, and correspond to an integrated luminosity of 35.9 fb(-1). The spectra of total transverse hadronic energy of candidate events are examined for deviations from the standard model predictions. No statistically significant excess is observed over the expected background. The first cross section limits on new physics processes resulting in such events are set. The results are interpreted as upper limits on the rate of gluino pair production, utilizing a simplified stealth supersymmetry model. The excluded gluino masses extend up to 1.7 TeV, for a neutralino mass of 200 GeV and exceed previous mass constraints set by analyses targeting events with isolated photons.Peer reviewe

Observation of the Production of Three Massive Gauge Bosons at root s=13 TeV

The first observation is reported of the combined production of three massive gauge bosons (VVV with V = W, Z) in proton-proton collisions at a center-of-mass energy of 13 TeV. The analysis is based on a data sample recorded by the CMS experiment at the CERN LHC corresponding to an integrated luminosity of 137 fb(-1). The searches for individualWWW, WWZ, WZZ, and ZZZ production are performed in final states with three, four, five, and six leptons (electrons or muons), or with two same-sign leptons plus one or two jets. The observed (expected) significance of the combinedVVV production signal is 5.7 (5.9) standard deviations and the corresponding measured cross section relative to the standard model prediction is 1.02(-0.23)(+0.26). The significances of the individual WWW and WWZ production are 3.3 and 3.4 standard deviations, respectively. Measured production cross sections for the individual triboson processes are also reported

Reconstruction of signal amplitudes in the CMS electromagnetic calorimeter in the presence of overlapping proton-proton interactions

A template fitting technique for reconstructing the amplitude of signals produced by the lead tungstate crystals of the CMS electromagnetic calorimeter is described. This novel approach is designed to suppress the contribution to the signal of the increased number of out-of-time interactions per beam crossing following the reduction of the accelerator bunch spacing from 50 to 25 ns at the start of Run 2 of the LHC. Execution of the algorithm is sufficiently fast for it to be employed in the CMS high-level trigger. It is also used in the offline event reconstruction. Results obtained from simulations and from Run 2 collision data (2015-2018) demonstrate a substantial improvement in the energy resolution of the calorimeter over a range of energies extending from a few GeV to several tens of GeV.Peer reviewe