3,020 research outputs found
LHCb trigger streams optimization
The LHCb experiment stores around collision events per year. A
typical physics analysis deals with a final sample of up to events.
Event preselection algorithms (lines) are used for data reduction. Since the
data are stored in a format that requires sequential access, the lines are
grouped into several output file streams, in order to increase the efficiency
of user analysis jobs that read these data. The scheme efficiency heavily
depends on the stream composition. By putting similar lines together and
balancing the stream sizes it is possible to reduce the overhead. We present a
method for finding an optimal stream composition. The method is applied to a
part of the LHCb data (Turbo stream) on the stage where it is prepared for user
physics analysis. This results in an expected improvement of 15% in the speed
of user analysis jobs, and will be applied on data to be recorded in 2017.Comment: Submitted to CHEP-2016 proceeding
New approaches for boosting to uniformity
The use of multivariate classifiers has become commonplace in particle physics. To enhance the performance, a series of classifiers is typically trained; this is a technique known as boosting. This paper explores several novel boosting methods that have been designed to produce a uniform selection efficiency in a chosen multivariate space. Such algorithms have a wide range of applications in particle physics, from producing uniform signal selection efficiency across a Dalitz-plot to avoiding the creation of false signal peaks in an invariant mass distribution when searching for new particles.National Science Foundation (U.S.) (Grant PHY-1306550
Deep learning for inferring cause of data anomalies
Daily operation of a large-scale experiment is a resource consuming task,
particularly from perspectives of routine data quality monitoring. Typically,
data comes from different sub-detectors and the global quality of data depends
on the combinatorial performance of each of them. In this paper, the problem of
identifying channels in which anomalies occurred is considered. We introduce a
generic deep learning model and prove that, under reasonable assumptions, the
model learns to identify 'channels' which are affected by an anomaly. Such
model could be used for data quality manager cross-check and assistance and
identifying good channels in anomalous data samples. The main novelty of the
method is that the model does not require ground truth labels for each channel,
only global flag is used. This effectively distinguishes the model from
classical classification methods. Being applied to CMS data collected in the
year 2010, this approach proves its ability to decompose anomaly by separate
channels.Comment: Presented at ACAT 2017 conference, Seattle, US
Observation of an Excited Bc+ State
Using pp collision data corresponding to an integrated luminosity of 8.5 fb-1 recorded by the LHCb experiment at center-of-mass energies of s=7, 8, and 13 TeV, the observation of an excited Bc+ state in the Bc+π+π- invariant-mass spectrum is reported. The observed peak has a mass of 6841.2±0.6(stat)±0.1(syst)±0.8(Bc+) MeV/c2, where the last uncertainty is due to the limited knowledge of the Bc+ mass. It is consistent with expectations of the Bc∗(2S31)+ state reconstructed without the low-energy photon from the Bc∗(1S31)+→Bc+γ decay following Bc∗(2S31)+→Bc∗(1S31)+π+π-. A second state is seen with a global (local) statistical significance of 2.2σ (3.2σ) and a mass of 6872.1±1.3(stat)±0.1(syst)±0.8(Bc+) MeV/c2, and is consistent with the Bc(2S10)+ state. These mass measurements are the most precise to date
Study of charmonium production in b -hadron decays and first evidence for the decay Bs0
Using decays to φ-meson pairs, the inclusive production of charmonium states in b-hadron decays is studied with pp collision data corresponding to an integrated luminosity of 3.0 fb−1, collected by the LHCb experiment at centre-of-mass energies of 7 and 8 TeV. Denoting byBC ≡ B(b → C X) × B(C → φφ) the inclusive branching fraction of a b hadron to a charmonium state C that decays into a pair of φ mesons, ratios RC1C2 ≡ BC1 /BC2 are determined as Rχc0ηc(1S) = 0.147 ± 0.023 ± 0.011, Rχc1ηc(1S) =0.073 ± 0.016 ± 0.006, Rχc2ηc(1S) = 0.081 ± 0.013 ± 0.005,Rχc1 χc0 = 0.50 ± 0.11 ± 0.01, Rχc2 χc0 = 0.56 ± 0.10 ± 0.01and Rηc(2S)ηc(1S) = 0.040 ± 0.011 ± 0.004. Here and below the first uncertainties are statistical and the second systematic.Upper limits at 90% confidence level for the inclusive production of X(3872), X(3915) and χc2(2P) states are obtained as RX(3872)χc1 < 0.34, RX(3915)χc0 < 0.12 andRχc2(2P)χc2 < 0.16. Differential cross-sections as a function of transverse momentum are measured for the ηc(1S) andχc states. The branching fraction of the decay B0s → φφφ is measured for the first time, B(B0s → φφφ) = (2.15±0.54±0.28±0.21B)×10−6. Here the third uncertainty is due to the branching fraction of the decay B0s → φφ, which is used for normalization. No evidence for intermediate resonances is seen. A preferentially transverse φ polarization is observed.The measurements allow the determination of the ratio of the branching fractions for the ηc(1S) decays to φφ and p p asB(ηc(1S)→ φφ)/B(ηc(1S)→ p p) = 1.79 ± 0.14 ± 0.32
First observation of oscillations in decays and measurement of the associated coherence parameters
Charm meson oscillations are observed in a time-dependent analysis of the
ratio of to decay
rates, using data corresponding to an integrated luminosity of recorded by the LHCb experiment. The measurements presented are
sensitive to the phase-space averaged ratio of doubly Cabibbo-suppressed to
Cabibbo-favoured amplitudes and the product of the coherence
factor and a charm mixing parameter . The
constraints measured are , which is
the most precise determination to date, and , which provides useful input for determinations
of the CP-violating phase in decays. The analysis also gives the most precise
measurement of the branching fraction, and the
first observation of oscillations in this decay mode, with a
significance of 8.2 standard deviations.Comment: All figures and tables, along with any supplementary material and
additional information, are available at
https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2015-057.htm
Constraints on the unitarity triangle angle from Dalitz plot analysis of decays
The first study is presented of CP violation with an amplitude analysis of
the Dalitz plot of decays, with , and . The analysis is based on a data sample corresponding to
of collisions collected with the LHCb detector. No
significant CP violation effect is seen, and constraints are placed on the
angle of the unitarity triangle formed from elements of the
Cabibbo-Kobayashi-Maskawa quark mixing matrix. Hadronic parameters associated
with the decay are determined for the first time. These
measurements can be used to improve the sensitivity to of existing and
future studies of the decay.Comment: All figures and tables, along with any supplementary material and
additional information, are available at
https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2015-059.html;
updated to correct figure 9 (numerical results unchanged
Measurement of the mass and lifetime of the baryon
A proton-proton collision data sample, corresponding to an integrated
luminosity of 3 fb collected by LHCb at and 8 TeV, is used
to reconstruct , decays. Using the , decay mode for calibration, the lifetime ratio and absolute
lifetime of the baryon are measured to be \begin{align*}
\frac{\tau_{\Omega_b^-}}{\tau_{\Xi_b^-}} &= 1.11\pm0.16\pm0.03, \\
\tau_{\Omega_b^-} &= 1.78\pm0.26\pm0.05\pm0.06~{\rm ps}, \end{align*} where the
uncertainties are statistical, systematic and from the calibration mode (for
only). A measurement is also made of the mass difference,
, and the corresponding mass, which
yields \begin{align*} m_{\Omega_b^-}-m_{\Xi_b^-} &= 247.4\pm3.2\pm0.5~{\rm
MeV}/c^2, \\ m_{\Omega_b^-} &= 6045.1\pm3.2\pm 0.5\pm0.6~{\rm MeV}/c^2.
\end{align*} These results are consistent with previous measurements.Comment: 11 pages, 5 figures, All figures and tables, along with any
supplementary material and additional information, are available at
https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2016-008.htm
Precision measurement of violation in decays
The time-dependent asymmetry in decays is
measured using collision data, corresponding to an integrated luminosity
of fb, collected with the LHCb detector at centre-of-mass energies
of and TeV. In a sample of 96 000 decays, the
-violating phase is measured, as well as the decay widths
and of the light and heavy mass eigenstates of the
system. The values obtained are rad, ps, andps, where the first uncertainty is
statistical and the second systematic. These are the most precise single
measurements of those quantities to date. A combined analysis with decays gives rad. All
measurements are in agreement with the Standard Model predictions. For the
first time the phase is measured independently for each polarisation
state of the system and shows no evidence for polarisation
dependence.Comment: 6 figure
Measurement of the branching fractions
The branching fraction of the decay is measured using collision data corresponding
to an integrated luminosity of , collected using the LHCb detector
at a centre-of-mass energy of TeV. It is found to be \begin{align*}
{\mathcal{B}}(B_{s}^{0}\rightarrow~D_{s}^{(*)+}D_{s}^{(*)-}) = (3.05 \pm 0.10
\pm 0.20 \pm 0.34)\%, \end{align*} where the uncertainties are statistical,
systematic, and due to the normalisation channel, respectively. The branching
fractions of the individual decays corresponding to the presence of one or two
are also measured. The individual branching fractions are found
to be \begin{align*}
{\mathcal{B}}(B_{s}^{0}\rightarrow~D_{s}^{*\pm}D_{s}^{\mp}) = (1.35 \pm 0.06
\pm 0.09 \pm 0.15)\%,
\newline{\mathcal{B}}(B_{s}^{0}\rightarrow~D_{s}^{*+}D_{s}^{*-}) = (1.27 \pm
0.08 \pm 0.10 \pm 0.14)\%. \end{align*} All three results are the most precise
determinations to date.Comment: All figures and tables, along with any supplementary material and
additional information, are available at
https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2015-053.htm
- …
