Unsur Intrinsik dalam Legenda Ulai Bujang Karem Sastra Lisan Dayak Ketungau Sesaek Kabupaten Sekadau

This research aim to analyzing theme, mandate, plot, character, and background in the legend Ulai Bujang Karem Oral Literature Dayak Ketungau Sesaek Sekadau, and describing implementation plan this study into learning Indonesian in the schools. The method used in this study is descriptive method. Based on the analysis of data can be concluded that the legend Ulai Bujang Karem there are theme, mandate, plot, character, and background. This result is expected being Indonesian study materials in the school especially to teach students to analyzing intrinsic element in a story. The learning is guided by the lesson plan that is suitable with the condition and situation with the school learning environment. Keywors: intrinsic element, legend, oral literatur

Bearing Loads in a Vehicular Flywheel Battery

Radial and axial rotor support bearings are critical elements in flywheel batteries for vehicle applications. This paper discusses the quantification of bearing loads required for the development of optimal bearing designs, particularly magnetic bearings. The primary contributors to bearing loads are shown to be vehicle shock, vibration, maneuvering, and gyrodynamics. Emphasis is placed on transit bus applications. Available data for each is presented, including actual measurements made on buses, and a detailed analysis of gyrodynamics.Center for Electromechanic

Influence of radial depth of cut on entry conditions and dynamics in face milling application

In this study, acceleration of the workpiece is measured for different radial depths of cut and cutting edge geometries. The influence of the radial depth of cut on the dynamical behavior is evaluated in time and frequency domains. The results for different radial depths of cut and cutting geometries are quantified using the root mean square value of acceleration. The outcome of this research study can be used both for the better cutting data recommendations and improved tool design.У даному дослідженні прискорення оброблюваної деталі вимірювали для різних радіальних глибин різання і геометрії ріжучої кромки фрези. Вплив радіальної глибини різання на динамічну поведінку оцінювали в часових і частотних інтервалах. Отримано кількісні результати для різних радіальних глибин і геометрії різання з використанням середньоквадратичного значення прискорення. Результати цього дослідження можуть бути використані для рекомендацій як покращення процесу різання, так і конструкції інструменту.В данном исследовании ускорение перемещения заготовки измеряли для разных радиальных глубин резания и геометрии режущей кромки фрезы. Влияние радиальной глубины резания на динамическое поведение оценивали во временных и частотных интервалах. Получены количественные результаты для различных радиальных глубин и геометрии резания с использованием среднеквадратичного значения ускорения. Результаты этого исследования могут быть использованы для рекомендаций по улучшению как процесса резания, так конструкции инструмента

Characterization of tool wear when machining Alloy 718 with high pressure cooling using conventional and surface-modified WC–Co tools

Coolant supplied by high pressure into the cutting zone has shown the lower thermal loads on the tool when machining difficult-to-cut materials as the Alloy 718. In this study, we investigate how the combination of high-pressure cooling and tool-surface modifications can lead to further improvements regarding tool life. The general approach is to enhance the coolant-tool interaction by increasing the contact area. Therefore, we machined cooling features into flank and rake faces of commercially available cemented tungsten carbide inserts. In this way, the surface area was increased by ~ 12 %. After the cutting tests, the tools were analyzed by scanning electron microscopy combined with energy-dispersive X-ray spectroscopy. Compared with conventional tools, the tool modifications reduced the flank wear by 45 % for the investigated cutting parameters. Furthermore, we were able to significantly increase the cutting speed and feed rate without failure of the tool. The investigated surface modifications have great potential to enhance the productivity of metal cutting processes

Investigation of A1g phonons in YBa2Cu3O7 by means of LAPW atomic-force calculations

We report first-principles frozen-phonon calculations for the determination of the force-free geometry and the dynamical matrix of the five Raman-active A1g modes in YBa2Cu3O7. To establish the shape of the phonon potentials atomic forces are calculated within the LAPW method. Two different schemes - the local density approximation (LDA) and a generalized gradient approximation (GGA) - are employed for the treatment of electronic exchange and correlation effects. We find that in the case of LDA the resulting phonon frequencies show a deviation from experimental values of approximately -10%. Invoking GGA the frequency values are significantly improved and also the eigenvectors are in very good agreement with experimental findings.Comment: 15 page

Band-structure trend in hole-doped cuprates and correlation with Tcmax

By calculation and analysis of the bare conduction bands in a large number of hole-doped high-temperature superconductors, we have identified the energy of the so-called axial-orbital as the essential, material-dependent parameter. It is uniquely related to the range of the intra-layer hopping. It controls the Cu 4s-character, influences the perpendicular hopping, and correlates with the observed Tc at optimal doping. We explain its dependence on chemical composition and structure, and present a generic tight-binding model.Comment: 5 pages, Latex, 5 eps figure

T-cell Subsets and Antifungal Host Defenses

It has been long appreciated that protective immunity against fungal pathogens is dependent on activation of cellular adaptive immune responses represented by T lymphocytes. The T-helper (Th)1/Th2 paradigm has proven to be essential for the understanding of protective adaptive host responses. Studies that have examined the significance of regulatory T cells in fungal infection, and the recent discovery of a new T-helper subset called Th17 have provided crucial information for understanding the complementary roles played by the various T-helper lymphocytes in systemic versus mucosal antifungal host defense. This review provides an overview of the role of the various T-cell subsets during fungal infections and the reciprocal regulation between the T-cell subsets contributing to the tailored host response against fungal pathogens

Status Update and Interim Results from the Asymptomatic Carotid Surgery Trial-2 (ACST-2)

Objectives: ACST-2 is currently the largest trial ever conducted to compare carotid artery stenting (CAS) with carotid endarterectomy (CEA) in patients with severe asymptomatic carotid stenosis requiring revascularization. Methods: Patients are entered into ACST-2 when revascularization is felt to be clearly indicated, when CEA and CAS are both possible, but where there is substantial uncertainty as to which is most appropriate. Trial surgeons and interventionalists are expected to use their usual techniques and CE-approved devices. We report baseline characteristics and blinded combined interim results for 30-day mortality and major morbidity for 986 patients in the ongoing trial up to September 2012. Results: A total of 986 patients (687 men, 299 women), mean age 68.7 years (SD ± 8.1) were randomized equally to CEA or CAS. Most (96%) had ipsilateral stenosis of 70-99% (median 80%) with contralateral stenoses of 50-99% in 30% and contralateral occlusion in 8%. Patients were on appropriate medical treatment. For 691 patients undergoing intervention with at least 1-month follow-up and Rankin scoring at 6 months for any stroke, the overall serious cardiovascular event rate of periprocedural (within 30 days) disabling stroke, fatal myocardial infarction, and death at 30 days was 1.0%. Conclusions: Early ACST-2 results suggest contemporary carotid intervention for asymptomatic stenosis has a low risk of serious morbidity and mortality, on par with other recent trials. The trial continues to recruit, to monitor periprocedural events and all types of stroke, aiming to randomize up to 5,000 patients to determine any differential outcomes between interventions. Clinical trial: ISRCTN21144362. © 2013 European Society for Vascular Surgery. Published by Elsevier Ltd. All rights reserved

Planck 2013 results. III. LFI systematic uncertainties

Peer reviewe