The classification and new trends of shared control strategies in telerobotic systems: A survey

Shared control, which permits a human operator and an autonomous controller to share the control of a telerobotic system, can reduce the operator's workload and/or improve performances during the execution of tasks. Due to the great benefits of combining the human intelligence with the higher power/precision abilities of robots, the shared control architecture occupies a wide spectrum among telerobotic systems. Although various shared control strategies have been proposed, a systematic overview to tease out the relation among different strategies is still absent. This survey, therefore, aims to provide a big picture for existing shared control strategies. To achieve this, we propose a categorization method and classify the shared control strategies into 3 categories: Semi-Autonomous control (SAC), State-Guidance Shared Control (SGSC), and State-Fusion Shared Control (SFSC), according to the different sharing ways between human operators and autonomous controllers. The typical scenarios in using each category are listed and the advantages/disadvantages and open issues of each category are discussed. Then, based on the overview of the existing strategies, new trends in shared control strategies, including the “autonomy from learning” and the “autonomy-levels adaptation,” are summarized and discussed

Télé-opération Corps Complet de Robots Humanoïdes

This thesis aims to investigate systems and tools for teleoperating a humanoid robot. Robotteleoperation is crucial to send and control robots in environments that are dangerous or inaccessiblefor humans (e.g., disaster response scenarios, contaminated environments, or extraterrestrialsites). The term teleoperation most commonly refers to direct and continuous control of a robot.In this case, the human operator guides the motion of the robot with her/his own physical motionor through some physical input device. One of the main challenges is to control the robot in a waythat guarantees its dynamical balance while trying to follow the human references. In addition,the human operator needs some feedback about the state of the robot and its work site through remotesensors in order to comprehend the situation or feel physically present at the site, producingeffective robot behaviors. Complications arise when the communication network is non-ideal. Inthis case the commands from human to robot together with the feedback from robot to human canbe delayed. These delays can be very disturbing for the human operator, who cannot teleoperatetheir robot avatar in an effective way.Another crucial point to consider when setting up a teleoperation system is the large numberof parameters that have to be tuned to effectively control the teleoperated robots. Machinelearning approaches and stochastic optimizers can be used to automate the learning of some of theparameters.In this thesis, we proposed a teleoperation system that has been tested on the humanoid robotiCub. We used an inertial-technology-based motion capture suit as input device to control thehumanoid and a virtual reality headset connected to the robot cameras to get some visual feedback.We first translated the human movements into equivalent robot ones by developping a motionretargeting approach that achieves human-likeness while trying to ensure the feasibility of thetransferred motion. We then implemented a whole-body controller to enable the robot to trackthe retargeted human motion. The controller has been later optimized in simulation to achieve agood tracking of the whole-body reference movements, by recurring to a multi-objective stochasticoptimizer, which allowed us to find robust solutions working on the real robot in few trials.To teleoperate walking motions, we implemented a higher-level teleoperation mode in whichthe user can use a joystick to send reference commands to the robot. We integrated this setting inthe teleoperation system, which allows the user to switch between the two different modes.A major problem preventing the deployment of such systems in real applications is the presenceof communication delays between the human input and the feedback from the robot: evena few hundred milliseconds of delay can irremediably disturb the operator, let alone a few seconds.To overcome these delays, we introduced a system in which a humanoid robot executescommands before it actually receives them, so that the visual feedback appears to be synchronizedto the operator, whereas the robot executed the commands in the past. To do so, the robot continuouslypredicts future commands by querying a machine learning model that is trained on pasttrajectories and conditioned on the last received commands.Cette thèse vise à étudier des systèmes et des outils pour la télé-opération d’un robot humanoïde.La téléopération de robots est cruciale pour envoyer et contrôler les robots dans des environnementsdangereux ou inaccessibles pour les humains (par exemple, des scénarios d’interventionen cas de catastrophe, des environnements contaminés ou des sites extraterrestres). Le terme téléopérationdésigne le plus souvent le contrôle direct et continu d’un robot. Dans ce cas, l’opérateurhumain guide le mouvement du robot avec son propre mouvement physique ou via un dispositifde contrôle. L’un des principaux défis est de contrôler le robot de manière à garantir son équilibredynamique tout en essayant de suivre les références humaines. De plus, l’opérateur humain abesoin d’un retour d’information sur l’état du robot et de son site via des capteurs à distance afind’appréhender la situation ou de se sentir physiquement présent sur le site, produisant des comportementsde robot efficaces. Des complications surviennent lorsque le réseau de communicationn’est pas idéal. Dans ce cas, les commandes de l’homme au robot ainsi que la rétroaction du robotà l’homme peuvent être retardées. Ces délais peuvent être très gênants pour l’opérateur humain,qui ne peut pas télé-opérer efficacement son avatar robotique.Un autre point crucial à considérer lors de la mise en place d’un système de télé-opérationest le grand nombre de paramètres qui doivent être réglés pour contrôler efficacement les robotstélé-opérés. Des approches d’apprentissage automatique et des optimiseurs stochastiques peuventêtre utilisés pour automatiser l’apprentissage de certains paramètres.Dans cette thèse, nous avons proposé un système de télé-opération qui a été testé sur le robothumanoïde iCub. Nous avons utilisé une combinaison de capture de mouvement basée sur latechnologie inertielle comme périphérique de contrôle pour l’humanoïde et un casque de réalitévirtuelle connecté aux caméras du robot pour obtenir un retour visuel. Nous avons d’abord traduitles mouvements humains en mouvements robotiques équivalents en développant une approchede retargeting de mouvement qui atteint la ressemblance humaine tout en essayant d’assurer lafaisabilité du mouvement transféré. Nous avons ensuite implémenté un contrôleur du corps entierpour permettre au robot de suivre le mouvement humain reciblé. Le contrôleur a ensuite étéoptimisé en simulation pour obtenir un bon suivi des mouvements de référence du corps entier,en recourant à un optimiseur stochastique multi-objectifs, ce qui nous a permis de trouver dessolutions robustes fonctionnant sur le robot réel en quelques essais.Pour télé-opérer les mouvements de marche, nous avons implémenté un mode de télé-opérationde niveau supérieur dans lequel l’utilisateur peut utiliser un joystick pour envoyer des commandesde référence au robot. Nous avons intégré ce paramètre dans le système de télé-opération, ce quipermet à l’utilisateur de basculer entre les deux modes différents.Un problème majeur empêchant le déploiement de tels systèmes dans des applications réellesest la présence de retards de communication entre l’entrée humaine et le retour du robot: mêmequelques centaines de millisecondes de retard peuvent irrémédiablement perturber l’opérateur,encore plus quelques secondes. Pour surmonter ces retards, nous avons introduit un système danslequel un robot humanoïde exécute des commandes avant de les recevoir, de sorte que le retourvisuel semble être synchronisé avec l’opérateur, alors que le robot exécutait les commandes dansle passé. Pour ce faire, le robot prédit en permanence les commandes futures en interrogeant unmodèle d’apprentissage automatique formé sur les trajectoires passées et conditionné aux dernièrescommandes reçues

Soft Robotics: Design for Simplicity, Performance, and Robustness of Robots for Interaction with Humans.

This thesis deals with the design possibilities concerning the next generation of advanced Robots. Aim of the work is to study, analyse and realise artificial systems that are essentially simple, performing and robust and can live and coexist with humans. The main design guideline followed in doing so is the Soft Robotics Approach, that implies the design of systems with intrinsic mechanical compliance in their architecture. The first part of the thesis addresses design of new soft robotics actuators, or robotic muscles. At the beginning are provided information about what a robotic muscle is and what is needed to realise it. A possible classification of these systems is analysed and some criteria useful for their comparison are explained. After, a set of functional specifications and parameters is identified and defined, to characterise a specific subset of this kind of actuators, called Variable Stiffness Actuators. The selected parameters converge in a data-sheet that easily defines performance and abilities of the robotic system. A complete strategy for the design and realisation of this kind of system is provided, which takes into account their me- chanical morphology and architecture. As consequence of this, some new actuators are developed, validated and employed in the execution of complex experimental tasks. In particular the actuator VSA-Cube and its add-on, a Variable Damper, are developed as the main com- ponents of a robotics low-cost platform, called VSA-CubeBot, that v can be used as an exploratory platform for multi degrees of freedom experiments. Experimental validations and mathematical models of the system employed in multi degrees of freedom tasks (bimanual as- sembly and drawing on an uneven surface), are reported. The second part of the thesis is about the design of multi fingered hands for robots. In this part of the work the Pisa-IIT SoftHand is introduced. It is a novel robot hand prototype designed with the purpose of being as easily usable, robust and simple as an industrial gripper, while exhibiting a level of grasping versatility and an aspect comparable to that of the human hand. In the thesis the main theo- retical tool used to enable such simplification, i.e. the neuroscience– based notion of soft synergies, are briefly reviewed. The approach proposed rests on ideas coming from underactuated hand design. A synthesis method to realize a desired set of soft synergies through the principled design of adaptive underactuated mechanisms, which is called the method of adaptive synergies, is discussed. This ap- proach leads to the design of hands accommodating in principle an arbitrary number of soft synergies, as demonstrated in grasping and manipulation simulations and experiments with a prototype. As a particular instance of application of the method of adaptive syner- gies, the Pisa–IIT SoftHand is then described in detail. The design and implementation of the prototype hand are shown and its effec- tiveness demonstrated through grasping experiments. Finally, control of the Pisa/IIT Hand is considered. Few different control strategies are adopted, including an experimental setup with the use of surface Electromyographic signals

An Object Template Approach to Manipulation for Semi-autonomous Avatar Robots

Nowadays, the first steps towards the use of mobile robots to perform manipulation tasks in remote environments have been made possible. This opens new possibilities for research and development, since robots can help humans to perform tasks in many scenarios. A remote robot can be used as avatar in applications such as for medical or industrial use, in rescue and disaster recovery tasks which might be hazardous environments for human beings to enter, as well as for more distant scenarios like planetary explorations. Among the most typical applications in recent years, research towards the deployment of robots to mitigate disaster scenarios has been of great interest in the robotics field. Disaster scenarios present challenges that need to be tackled. Their unstructured nature makes them difficult to predict and even though some assumptions can be made for human-designed scenarios, there is no certainty on the expected conditions. Communications with a robot inside these scenarios might also be challenged; wired communications limit reachability and wireless communications are limited by bandwidth. Despite the great progress in the robotics research field, these difficulties have prevented the current autonomous robotic approaches to perform efficiently in unstructured remote scenarios. On one side, acquiring physical and abstract information from unknown objects in a full autonomous way in uncontrolled environmental conditions is still an unsolved problem. Several challenges have to be overcome such as object recognition, grasp planning, manipulation, and mission planning among others. On the other side, purely teleoperated robots require a reliable communication link robust to reachability, bandwidth, and latency which can provide all the necessary feedback that a human operator needs in order to achieve sufficiently good situational awareness, e.g., worldmodel, robot state, forces, and torques exerted. Processing this amount of information plus the necessary training to perform joint motions with the robot represent a high mental workload for the operator which results in very low execution times. Additionally, a pure teleoperated approach is error-prone given that the success in a manipulation task strongly depends on the ability and expertise of the human operating the robot. Both, autonomous and teleoperated robotic approaches have pros and cons, for this reason a middle ground approach has emerged. In an approach where a human supervises a semi-autonomous remote robot, strengths from both, full autonomous and purely teleoperated approaches can be combined while at the same time their weaknesses can be tackled. A remote manipulation task can be divided into sub-tasks such as planning, perception, action, and evaluation. A proper distribution of these sub-tasks between the human operator and the remote robot can increase the efficiency and potential of success in a manipulation task. On the one hand, a human operator can trivially plan a task (planning), identify objects in the sensor data acquired by the robot (perception), and verify the completion of a task (evaluation). On the other hand, it is challenging to remotely control in joint space a robotic system like a humanoid robot that can easily have over 25 degrees of freedom (DOF). For this reason, in this approach the complex sub-tasks such as motion planning, motion execution, and obstacle avoidance (action) are performed autonomously by the remote robot. With this distribution of tasks, the challenge of converting the operator intent into a robot action arises. This thesis investigates concepts of how to efficiently provide a remote robot with the operator intent in a flexible means of interaction. While current approaches focus on an object-grasp-centered means of interaction, this thesis aims at providing physical and abstract properties of the objects of interest. With this information, the robot can perform autonomous subtasks like locomotion through the environment, grasping objects, and manipulating them at an affordance-level avoiding collisions with the environment in order to efficiently accomplish the manipulation task needed. For this purpose, the concept of Object Template (OT) has been developed in this thesis. An OT is a virtual representation of an object of interest that contains information that a remote robot can use to manipulate such object or other similar objects. The object template concept presented here goes beyond state-of-the-art related concepts by extending the robot capabilities to use affordance information of the object. This concept includes physical information (mass, center of mass, inertia tensor) as well as abstract information (potential grasps, affordances, and usabilities). Because humans are very good at analysing a situation, planning new ways of how to solve a task, even using objects for different purposes, it is important to allow communicating the planning and perception performed by the operator such that the robot can execute the action based on the information contained in the OT. This leverages human intelligence with robot capabilities. For example, as an implementation in a 3D environment, an OT can be visualized as a 3D geometry mesh that simulates an object of interest. A human operator can manipulate the OT and move it so that it overlaps with the visualized sensor data of the real object. Information of the object template type and its pose can be compressed and sent using low bandwidth communication. Then, the remote robot can use the information of the OT to approach, grasp, and manipulate the real object. The use of remote humanoid robots as avatars is expected to be intuitive to operators (or potential human response forces) since the kinematic chains and degrees of freedom are similar to humans. This allows operators to visualize themselves in the remote environment and think how to solve a task, however, task requirements such as special tools might not be found. For this reason, a flexible means of interaction that can account for allowing improvisation from the operator is also needed. In this approach, improvisation is described as "a change of a plan on how to achieve a certain task, depending on the current situation". A human operator can then improvise by adapting the affordances of known objects into new unknown objects. For example, by utilizing the affordances defined in an OT on a new object that has similar physical properties or which manipulation skills belong to the same class. The experimental results presented in this thesis validate the proposed approach by demonstrating the successful achievement of several manipulation tasks using object templates. Systematic laboratory experimentation has been performed to evaluate the individual aspects of this approach. The performance of the approach has been tested in three different humanoid robotic systems (one of these robots belongs to another research laboratory). These three robotic platforms also participated in the renowned international competition DARPA Robotics Challenge (DRC) which between 2012 and 2015 was considered the most ambitious and challenging robotic competition

Human-Robot Collaborations in Industrial Automation

Technology is changing the manufacturing world. For example, sensors are being used to track inventories from the manufacturing floor up to a retail shelf or a customer’s door. These types of interconnected systems have been called the fourth industrial revolution, also known as Industry 4.0, and are projected to lower manufacturing costs. As industry moves toward these integrated technologies and lower costs, engineers will need to connect these systems via the Internet of Things (IoT). These engineers will also need to design how these connected systems interact with humans. The focus of this Special Issue is the smart sensors used in these human–robot collaborations