278 research outputs found

    Energy Efficient Protocols for Delay Tolerant Networks

    Get PDF
    The delay tolerant networks (DTNs) is characterized by frequent disconnections and long delays of links among devices due to mobility, sparse deployment of devices, attacks, and noise, etc. Considerable research efforts have been devoted recently to DTNs enabling communications between network entities with intermittent connectivity. Unfortunately, mobile devices have limited energy capacity, and the fundamental problem is that traditional power-saving mechanisms are designed assuming well connected networks. Due to much larger inter-contact durations than contact durations, devices spend most of their life time in the neighbor discovery, and centralized power-saving strategies are difficult. Consequently, mobile devices consume a significant amount of energy in the neighbor discovery, rather than in infrequent data transfers. Therefore, distributed energy efficient neighbor discovery protocols for DTNs are essential to minimize the degradation of network connectivity and maximize the benefits from mobility. In this thesis, we develop sleep scheduling protocols in the medium access control (MAC) layer that are adaptive and distributed under different clock synchronization conditions: synchronous, asynchronous, and semi-asynchronous. In addition, we propose a distributed clock synchronization protocol to mitigate the clock synchronization problem in DTNs. Our research accomplishments are briefly outlined as follows: Firstly, we design an adaptive exponential beacon (AEB) protocol. By exploiting the trend of contact availability, beacon periods are independently adjusted by each device and optimized using the distribution of contact durations. The AEB protocol significantly reduces energy consumption while maintaining comparable packet delivery delay and delivery ratio. Secondly, we design two asynchronous clock based sleep scheduling (ACDS) protocols. Based on the fact that global clock synchronization is difficult to achieve in general, predetermined patterns of sleep schedules are constructed using hierarchical arrangements of cyclic difference sets such that devices independently selecting different duty cycle lengths are still guaranteed to have overlapping awake intervals with other devices within the communication range. Thirdly, we design a distributed semi-asynchronous sleep scheduling (DSA) protocol. Although the synchronization error is unavoidable, some level of clock accuracy may be possible for many practical scenarios. The sleep schedules are constructed to guarantee contacts among devices having loosely synchronized clocks, and parameters are optimized using the distribution of synchronization error. We also define conditions for which the proposed semi-asynchronous protocol outperforms existing asynchronous sleep scheduling protocols. Lastly, we design a distributed clock synchronization (DCS) protocol. The proposed protocol considers asynchronous and long delayed connections when exchanging relative clock information among nodes. As a result, smaller synchronization error achieved by the proposed protocol allows more accurate timing information and renders neighbor discovery more energy efficient. The designed protocols improve the lifetime of mobile devices in DTNs by means of energy efficient neighbor discoveries that reduce the energy waste caused by idle listening problems

    Introducing the new paradigm of Social Dispersed Computing: Applications, Technologies and Challenges

    Full text link
    [EN] If last decade viewed computational services as a utility then surely this decade has transformed computation into a commodity. Computation is now progressively integrated into the physical networks in a seamless way that enables cyber-physical systems (CPS) and the Internet of Things (IoT) meet their latency requirements. Similar to the concept of ¿platform as a service¿ or ¿software as a service¿, both cloudlets and fog computing have found their own use cases. Edge devices (that we call end or user devices for disambiguation) play the role of personal computers, dedicated to a user and to a set of correlated applications. In this new scenario, the boundaries between the network node, the sensor, and the actuator are blurring, driven primarily by the computation power of IoT nodes like single board computers and the smartphones. The bigger data generated in this type of networks needs clever, scalable, and possibly decentralized computing solutions that can scale independently as required. Any node can be seen as part of a graph, with the capacity to serve as a computing or network router node, or both. Complex applications can possibly be distributed over this graph or network of nodes to improve the overall performance like the amount of data processed over time. In this paper, we identify this new computing paradigm that we call Social Dispersed Computing, analyzing key themes in it that includes a new outlook on its relation to agent based applications. We architect this new paradigm by providing supportive application examples that include next generation electrical energy distribution networks, next generation mobility services for transportation, and applications for distributed analysis and identification of non-recurring traffic congestion in cities. The paper analyzes the existing computing paradigms (e.g., cloud, fog, edge, mobile edge, social, etc.), solving the ambiguity of their definitions; and analyzes and discusses the relevant foundational software technologies, the remaining challenges, and research opportunities.Garcia Valls, MS.; Dubey, A.; Botti, V. (2018). Introducing the new paradigm of Social Dispersed Computing: Applications, Technologies and Challenges. Journal of Systems Architecture. 91:83-102. https://doi.org/10.1016/j.sysarc.2018.05.007S831029

    Group Key Management in Wireless Ad-Hoc and Sensor Networks

    Get PDF
    A growing number of secure group applications in both civilian and military domains is being deployed in WAHNs. A Wireless Ad-hoc Network (WARN) is a collection of autonomous nodes or terminals that communicate with each other by forming a multi-hop radio network and maintaining connectivity in a decentralized manner. A Mobile Ad-hoc Network (MANET) is a special type of WARN with mobile users. MANET nodes have limited communication, computational capabilities, and power. Wireless Sensor Networks (WSNs) are sensor networks with massive numbers of small, inexpensive devices pervasive throughout electrical and mechanical systems and ubiquitous throughout the environment that monitor and control most aspects of our physical world. In a WAHNs and WSNs with un-trusted nodes, nodes may falsify information, collude to disclose system keys, or even passively refuse to collaborate. Moreover, mobile adversaries might invade more than one node and try to reveal all system secret keys. Due to these special characteristics, key management is essential in securing such networks. Current protocols for secure group communications used in fixed networks tend to be inappropriate. The main objective of this research is to propose, design and evaluate a suitable key management approach for secure group communications to support WAHNs and WSNs applications. Key management is usually divided into key analysis, key assignment, key generation and key distribution. In this thesis, we tried to introduce key management schemes to provide secure group communications in both WAHNs and WSNs. Starting with WAHNs, we developed a key management scheme. A novel architecture for secure group communications was proposed. Our proposed scheme handles key distribution through Combinatorial Key Distribution Scheme (CKDS). We followed with key generation using Threshold-based Key Generation in WAHNs (TKGS). For key assignment, we proposed Combinatorial Key Assignment Scheme (CKAS), which assigns closer key strings to co-located nodes. We claim that our architecture can readily be populated with components to support objectives such as fault tolerance, full-distribution and scalability to mitigate WAHNs constraints. In our architecture, group management is integrated with multicast at the application layer. For key management in WSNs, we started with DCK, a modified scheme suitable for WSNs. In summary, the DCK achieves the following: (1) cluster leader nodes carry the major part of the key management overhead; (2) DCK consumes less than 50% of the energy consumed by SHELL in key management; (3) localizing key refreshment and handling node capture enhances the security by minimizing the amount of information known by each node about other portions of the network; and (4) since DCK does not involve the use of other clusters to maintain local cluster data, it scales better from a storage point of view with the network size represented by the number of clusters. We went further and proposed the use of key polynomials with DCK to enhance the resilience of multiple node capturing. Comparing our schemes to static and dynamic key management, our scheme was found to enhance network resilience at a smaller polynomial degree t and accordingly with less storage per node

    Adaptive Resource Allocation for Wireless Body Sensor Networks

    Get PDF
    The IEEE 802.15.4 standard is an interesting technology for use in Wireless Body Sensor Networks (WBSN), where entire networks of sensors are carried by humans. In many environments the sensor nodes experience external interference for example, when the WBSN is operated in the 2.4 GHz ISM band and the human moves in a densely populated city, it will likely experience WiFi interference, with a quickly changing ``interference landscape''. In this thesis we propose Adaptive Resource Allocation schemes, to be carried out by the WBSN, which provided noticeable performance gains in such environments. We investigate a range of adaptation schemes and assess their performance both through simulations and experimentally

    Data Storage and Dissemination in Pervasive Edge Computing Environments

    Get PDF
    Nowadays, smart mobile devices generate huge amounts of data in all sorts of gatherings. Much of that data has localized and ephemeral interest, but can be of great use if shared among co-located devices. However, mobile devices often experience poor connectivity, leading to availability issues if application storage and logic are fully delegated to a remote cloud infrastructure. In turn, the edge computing paradigm pushes computations and storage beyond the data center, closer to end-user devices where data is generated and consumed. Hence, enabling the execution of certain components of edge-enabled systems directly and cooperatively on edge devices. This thesis focuses on the design and evaluation of resilient and efficient data storage and dissemination solutions for pervasive edge computing environments, operating with or without access to the network infrastructure. In line with this dichotomy, our goal can be divided into two specific scenarios. The first one is related to the absence of network infrastructure and the provision of a transient data storage and dissemination system for networks of co-located mobile devices. The second one relates with the existence of network infrastructure access and the corresponding edge computing capabilities. First, the thesis presents time-aware reactive storage (TARS), a reactive data storage and dissemination model with intrinsic time-awareness, that exploits synergies between the storage substrate and the publish/subscribe paradigm, and allows queries within a specific time scope. Next, it describes in more detail: i) Thyme, a data storage and dis- semination system for wireless edge environments, implementing TARS; ii) Parsley, a flexible and resilient group-based distributed hash table with preemptive peer relocation and a dynamic data sharding mechanism; and iii) Thyme GardenBed, a framework for data storage and dissemination across multi-region edge networks, that makes use of both device-to-device and edge interactions. The developed solutions present low overheads, while providing adequate response times for interactive usage and low energy consumption, proving to be practical in a variety of situations. They also display good load balancing and fault tolerance properties.Resumo Hoje em dia, os dispositivos móveis inteligentes geram grandes quantidades de dados em todos os tipos de aglomerações de pessoas. Muitos desses dados têm interesse loca- lizado e efêmero, mas podem ser de grande utilidade se partilhados entre dispositivos co-localizados. No entanto, os dispositivos móveis muitas vezes experienciam fraca co- nectividade, levando a problemas de disponibilidade se o armazenamento e a lógica das aplicações forem totalmente delegados numa infraestrutura remota na nuvem. Por sua vez, o paradigma de computação na periferia da rede leva as computações e o armazena- mento para além dos centros de dados, para mais perto dos dispositivos dos utilizadores finais onde os dados são gerados e consumidos. Assim, permitindo a execução de certos componentes de sistemas direta e cooperativamente em dispositivos na periferia da rede. Esta tese foca-se no desenho e avaliação de soluções resilientes e eficientes para arma- zenamento e disseminação de dados em ambientes pervasivos de computação na periferia da rede, operando com ou sem acesso à infraestrutura de rede. Em linha com esta dico- tomia, o nosso objetivo pode ser dividido em dois cenários específicos. O primeiro está relacionado com a ausência de infraestrutura de rede e o fornecimento de um sistema efêmero de armazenamento e disseminação de dados para redes de dispositivos móveis co-localizados. O segundo diz respeito à existência de acesso à infraestrutura de rede e aos recursos de computação na periferia da rede correspondentes. Primeiramente, a tese apresenta armazenamento reativo ciente do tempo (ARCT), um modelo reativo de armazenamento e disseminação de dados com percepção intrínseca do tempo, que explora sinergias entre o substrato de armazenamento e o paradigma pu- blicação/subscrição, e permite consultas num escopo de tempo específico. De seguida, descreve em mais detalhe: i) Thyme, um sistema de armazenamento e disseminação de dados para ambientes sem fios na periferia da rede, que implementa ARCT; ii) Pars- ley, uma tabela de dispersão distribuída flexível e resiliente baseada em grupos, com realocação preventiva de nós e um mecanismo de particionamento dinâmico de dados; e iii) Thyme GardenBed, um sistema para armazenamento e disseminação de dados em redes multi-regionais na periferia da rede, que faz uso de interações entre dispositivos e com a periferia da rede. As soluções desenvolvidas apresentam baixos custos, proporcionando tempos de res- posta adequados para uso interativo e baixo consumo de energia, demonstrando serem práticas nas mais diversas situações. Estas soluções também exibem boas propriedades de balanceamento de carga e tolerância a faltas

    New Challenges on Web Architectures for the Homogenization of the Heterogeneity of Smart Objects in the Internet of Things

    Get PDF
    Aquesta tesi tracta de dues de les noves tecnologies relacionades amb la Internet of Things (IoT) i la seva integració amb el camp de les Smart Grids (SGs); aquestes tecnologies son la Web of Things (WoT) i la Social Internet of Things (SIoT). La WoT és una tecnologia que s’espera que proveeixi d’un entorn escalable i interoperable a la IoT usant la infraestructura web existent, els protocols web y la web semàntica. També s’espera que la SIoT contribueixi a solucionar els reptes d’escalabilitat i capacitat de descobriment creant una xarxa social d’agents (objectes i humans). Per explorar la sinergia entre aquestes tecnologies, l’objectiu és el de proporcionar evidència pràctica i empírica, generalment en forma de prototips d’implementació i experimentació empírica. En relació amb la WoT i les SGs, s’ha creat un prototip per al Web of Energy (WoE) que té com a objectiu abordar els desafiaments presents en el domini les SGs. El prototip és capaç de proporcionar interoperabilitat i homogeneïtat entre diversos protocols. El disseny d’implementació es basa en el Model d’Actors, que també proporciona escalabilitat del prototip. L’experimentació mostra que el prototip pot gestionar la transmissió de missatges per a aplicacions de les SGs que requereixen que la comunicació es realitzi sota llindars de temps crítics. També es pren una altra direcció d’investigació similar, menys centrada en les SGs, però per a una gamma més àmplia de dominis d’aplicació. S’integra la descripció dels fluxos d’execució com a màquines d’estats finits utilitzant ontologies web (Resource Description Framework (RDF)) i metodologies de la WoT (les accions es realitzen basant-se en peticions Hyper-Text Transfer Protocol/Secure (HTTP/S) a Uniform Resource Locators (URLs)). Aquest flux d’execució, que també pot ser un plantilla per a permetre una configuració flexible en temps d’execució, s’implementa i interpreta com si fos (i mitjançant) un Virtual Object (VO). L’objectiu de la plantilla és ser reutilitzable i poder-se compartir entre múltiples desplegaments de la IoT dins el mateix domini d’aplicació. A causa de les tecnologies utilitzades, la solució no és adequada per a aplicacions de temps crític (llindar de temps relativament baix i rígid). No obstant això, és adequat per a aplicacions que no demanden resposta en un temps crític i que requereixen el desplegament de VOs similars en el que fa referència al flux d’execució. Finalment, el treball s’enfoca en una altra tecnologia destinada a millorar l’escalabilitat i la capacitat de descobriment en la IoT. La SIoT està sorgint com una nova estructura de la IoT que uneix els nodes a través de relacions significatives. Aquestes relacions tenen com a objectiu millorar la capacitat de descobriment; en conseqüència, millora la escalabilitat d’una xarxa de la IoT. En aquest treball s’aplica aquest nou paradigma per optimitzar la gestió de l’energia en el costat de la demanda a les SGs. L’objectiu és aprofitar les característiques de la SIoT per ajudar a la creació de Prosumer Community Groups (PCGs) (grups d’usuaris que consumeixen o produeixen energia) amb el mateix objectiu d’optimització en l’ús de l’energia. La sinergia entre la SIoT i les SGs s’ha anomenat Social Internet of Energy (SIoE). Per tant, amb la SIoE i amb el focus en un desafiament específic, s’estableix la base conceptual per a la integració entre la SIoT i les SGs. Els experiments inicials mostren resultats prometedors i aplanen el camí per a futures investigacions i avaluacions de la proposta. Es conclou que el WoT i la SIoT són dos paradigmes complementaris que nodreixen l’evolució de la propera generació de la IoT. S’espera que la propera generació de la IoT sigui un Multi-Agent System (MAS) generalitzat. Alguns investigadors ja estan apuntant a la Web i les seves tecnologies (per exemple, Web Semàntica, HTTP/S)—i més concretamente a la WoT — com a l’entorn que nodreixi a aquests agents. La SIoT pot millorar tant l’entorn com les relacions entre els agents en aquesta fusió. Les SGs també poden beneficiar-se dels avenços de la IoT, ja que es poden considerar com una aplicació específica d’aquesta última.  Esta tesis trata de dos de las novedosas tecnologías relacionadas con la Internet of Things (IoT) y su integración con el campo de las Smart Grids (SGs); estas tecnologías son laWeb of Things (WoT) y la Social Internet of Things (SIoT). La WoT es una tecnología que se espera que provea de un entorno escalable e interoperable a la IoT usando la infraestructura web existente, los protocolos web y la web semántica. También se espera que la SIoT contribuya a solucionar los retos de escalabilidad y capacidad de descubrimiento creando una red social de agentes (objetos y humanos). Para explorar la sinergia entre estas tecnologías, el objetivo es el de proporcionar evidencia práctica y empírica, generalmente en forma de prototipos de implementación y experimentación empírica. En relación con la WoT y las SGs, se ha creado un prototipo para la Web of Energy (WoE) que tiene como objetivo abordar los desafíos presentes en el dominio las SGs. El prototipo es capaz de proporcionar interoperabilidad y homogeneidad entre diversos protocolos. El diseño de implementación se basa en el Modelo de Actores, que también proporciona escalabilidad del prototipo. La experimentación muestra que el prototipo puede manejar la transmisión de mensajes para aplicaciones de las SGs que requieran que la comunicación se realice bajo umbrales de tiempo críticos. También se toma otra dirección de investigación similar, menos centrada en las SGs, pero para una gama más amplia de dominios de aplicación. Se integra la descripción de los flujos de ejecución como máquinas de estados finitos utilizando ontologías web (Resource Description Framework (RDF)) y metodologías de la WoT (las acciones se realizan basándose en peticiones Hyper-Text Transfer Protocol/Secure (HTTP/S) a Uniform Resource Locators (URLs)). Este flujo de ejecución, que también puede ser una plantilla para permitir una configuración flexible en tiempo de ejecución, se implementa e interpreta como si fuera (y a través de) un Virtual Object (VO). El objetivo de la plantilla es que sea reutilizable y se pueda compartir entre múltiples despliegues de la IoT dentro del mismo dominio de aplicación. Debido a las tecnologías utilizadas, la solución no es adecuada para aplicaciones de tiempo crítico (umbral de tiempo relativamente bajo y rígido). Sin embargo, es adecuado para aplicaciones que no demandan respuesta en un tiempo crítico y que requieren el despliegue de VOs similares en cuanto al flujo de ejecución. Finalmente, el trabajo se enfoca en otra tecnología destinada a mejorar la escalabilidad y la capacidad de descubrimiento en la IoT. La SIoT está emergiendo como una nueva estructura de la IoT que une los nodos a través de relaciones significativas. Estas relaciones tienen como objetivo mejorar la capacidad de descubrimiento; en consecuencia, mejora la escalabilidad de una red de la IoT. En este trabajo se aplica este nuevo paradigma para optimizar la gestión de la energía en el lado de la demanda en las SGs. El objetivo es aprovechar las características de la SIoT para ayudar en la creación de Prosumer Community Groups (PCGs) (grupos de usuarios que consumen o producen energía) con el mismo objetivo de optimización en el uso de la energía. La sinergia entre la SIoT y las SGs ha sido denominada Social Internet of Energy (SIoE). Por lo tanto, con la SIoE y con el foco en un desafío específico, se establece la base conceptual para la integración entre la SIoT y las SG. Los experimentos iniciales muestran resultados prometedores y allanan el camino para futuras investigaciones y evaluaciones de la propuesta. Se concluye que la WoT y la SIoT son dos paradigmas complementarios que nutren la evolución de la próxima generación de la IoT. Se espera que la próxima generación de la IoT sea un Multi-Agent System (MAS) generalizado. Algunos investigadores ya están apuntando a la Web y sus tecnologías (por ejemplo,Web Semántica, HTTP/S)—y más concretamente a la WoT — como el entorno que nutra a estos agentes. La SIoT puede mejorar tanto el entorno como las relaciones entre los agentes en esta fusión. Como un campo específico de la IoT, las SGs también pueden beneficiarse de los avances de la IoT.This thesis deals with two novel Internet of Things (IoT) technologies and their integration to the field of the Smart Grid (SG); these technologies are the Web of Things (WoT) and the Social Internet of Things (SIoT). The WoT is an enabling technology expected to provide a scalable and interoperable environment to the IoT using the existing web infrastructure, web protocols and the semantic web. The SIoT is expected to expand further and contribute to scalability and discoverability challenges by creating a social network of agents (objects and humans). When exploring the synergy between those technologies, we aim at providing practical and empirical evidence, usually in the form of prototype implementations and empirical experimentation. In relation to the WoT and SG, we create a prototype for the Web of Energy (WoE), that aims at addressing challenges present in the SG domain. The prototype is capable of providing interoperability and homogeneity among diverse protocols. The implementation design is based on the Actor Model, which also provides scalability in regards to the prototype. Experimentation shows that the prototype can handle the transmission of messages for time-critical SG applications. We also take another similar research direction less focused on the SG, but for a broader range of application domains. We integrate the description of flows of execution as Finite-State Machines (FSMs) using web ontologies (Resource Description Framework (RDF)) and WoT methodologies (actions are performed on the basis of calls Hyper Text Transfer Protocol/ Secure (HTTP/S) to a Uniform Resource Locator (URL)). This execution flow, which can also be a template to allow flexible configuration at runtime, is deployed and interpreted as (and through) a Virtual Object (VO). The template aims to be reusable and shareable among multiple IoT deployments within the same application domain. Due to the technologies used, the solution is not suitable for time-critical applications. Nevertheless, it is suitable for non-time-critical applications that require the deployment of similar VOs. Finally, we focus on another technology aimed at improving scalability and discoverability in IoT. The SIoT is emerging as a new IoT structure that links nodes through meaningful relationships. These relationships aim at improving discoverability; consequently, improving the scalability of an IoT network. We apply this new paradigm to optimize energy management at the demand side in a SG. Our objective is to harness the features of the SIoT to aid in the creation of Prosumer Community Group (PCG) (groups of energy users that consume or produce energy) with the same Demand Side Management (DSM) goal. We refer to the synergy between SIoT and SG as Social Internet of Energy (SIoE). Therefore, with the SIoE and focusing on a specific challenge, we set the conceptual basis for the integration between SIoT and SG. Initial experiments show promising results and pave the way for further research and evaluation of the proposal. We conclude that the WoT and the SIoT are two complementary paradigms that nourish the evolution of the next generation IoT. The next generation IoT is expected to be a pervasive Multi-Agent System (MAS). Some researchers are already pointing at the Web and its technologies (e.g. Semantic Web, HTTP/S) — and more concretely at the WoT — as the environment nourishing the agents. The SIoT can enhance both the environment and the relationships between agents in this fusion. As a specific field of the IoT, the SG can also benefit from IoT advancements

    Mobile Ad-Hoc Networks

    Get PDF
    Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of-the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: quality-of-service and video communication, routing protocol and cross-layer design. A few interesting problems about security and delay-tolerant networks are also discussed. This book is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks

    New Challenges on Web Architectures for the Homogenization of the Heterogeneity of Smart Objects in the Internet of Things

    Get PDF
    Aquesta tesi tracta de dues de les noves tecnologies relacionades amb la Internet of Things (IoT) i la seva integració amb el camp de les Smart Grids (SGs); aquestes tecnologies son la Web of Things (WoT) i la Social Internet of Things (SIoT). La WoT és una tecnologia que s’espera que proveeixi d’un entorn escalable i interoperable a la IoT usant la infraestructura web existent, els protocols web y la web semàntica. També s’espera que la SIoT contribueixi a solucionar els reptes d’escalabilitat i capacitat de descobriment creant una xarxa social d’agents (objectes i humans). Per explorar la sinergia entre aquestes tecnologies, l’objectiu és el de proporcionar evidència pràctica i empírica, generalment en forma de prototips d’implementació i experimentació empírica. En relació amb la WoT i les SGs, s’ha creat un prototip per al Web of Energy (WoE) que té com a objectiu abordar els desafiaments presents en el domini les SGs. El prototip és capaç de proporcionar interoperabilitat i homogeneïtat entre diversos protocols. El disseny d’implementació es basa en el Model d’Actors, que també proporciona escalabilitat del prototip. L’experimentació mostra que el prototip pot gestionar la transmissió de missatges per a aplicacions de les SGs que requereixen que la comunicació es realitzi sota llindars de temps crítics. També es pren una altra direcció d’investigació similar, menys centrada en les SGs, però per a una gamma més àmplia de dominis d’aplicació. S’integra la descripció dels fluxos d’execució com a màquines d’estats finits utilitzant ontologies web (Resource Description Framework (RDF)) i metodologies de la WoT (les accions es realitzen basant-se en peticions Hyper-Text Transfer Protocol/Secure (HTTP/S) a Uniform Resource Locators (URLs)). Aquest flux d’execució, que també pot ser un plantilla per a permetre una configuració flexible en temps d’execució, s’implementa i interpreta com si fos (i mitjançant) un Virtual Object (VO). L’objectiu de la plantilla és ser reutilitzable i poder-se compartir entre múltiples desplegaments de la IoT dins el mateix domini d’aplicació. A causa de les tecnologies utilitzades, la solució no és adequada per a aplicacions de temps crític (llindar de temps relativament baix i rígid). No obstant això, és adequat per a aplicacions que no demanden resposta en un temps crític i que requereixen el desplegament de VOs similars en el que fa referència al flux d’execució. Finalment, el treball s’enfoca en una altra tecnologia destinada a millorar l’escalabilitat i la capacitat de descobriment en la IoT. La SIoT està sorgint com una nova estructura de la IoT que uneix els nodes a través de relacions significatives. Aquestes relacions tenen com a objectiu millorar la capacitat de descobriment; en conseqüència, millora la escalabilitat d’una xarxa de la IoT. En aquest treball s’aplica aquest nou paradigma per optimitzar la gestió de l’energia en el costat de la demanda a les SGs. L’objectiu és aprofitar les característiques de la SIoT per ajudar a la creació de Prosumer Community Groups (PCGs) (grups d’usuaris que consumeixen o produeixen energia) amb el mateix objectiu d’optimització en l’ús de l’energia. La sinergia entre la SIoT i les SGs s’ha anomenat Social Internet of Energy (SIoE). Per tant, amb la SIoE i amb el focus en un desafiament específic, s’estableix la base conceptual per a la integració entre la SIoT i les SGs. Els experiments inicials mostren resultats prometedors i aplanen el camí per a futures investigacions i avaluacions de la proposta. Es conclou que el WoT i la SIoT són dos paradigmes complementaris que nodreixen l’evolució de la propera generació de la IoT. S’espera que la propera generació de la IoT sigui un Multi-Agent System (MAS) generalitzat. Alguns investigadors ja estan apuntant a la Web i les seves tecnologies (per exemple, Web Semàntica, HTTP/S)—i més concretamente a la WoT — com a l’entorn que nodreixi a aquests agents. La SIoT pot millorar tant l’entorn com les relacions entre els agents en aquesta fusió. Les SGs també poden beneficiar-se dels avenços de la IoT, ja que es poden considerar com una aplicació específica d’aquesta última.  Esta tesis trata de dos de las novedosas tecnologías relacionadas con la Internet of Things (IoT) y su integración con el campo de las Smart Grids (SGs); estas tecnologías son laWeb of Things (WoT) y la Social Internet of Things (SIoT). La WoT es una tecnología que se espera que provea de un entorno escalable e interoperable a la IoT usando la infraestructura web existente, los protocolos web y la web semántica. También se espera que la SIoT contribuya a solucionar los retos de escalabilidad y capacidad de descubrimiento creando una red social de agentes (objetos y humanos). Para explorar la sinergia entre estas tecnologías, el objetivo es el de proporcionar evidencia práctica y empírica, generalmente en forma de prototipos de implementación y experimentación empírica. En relación con la WoT y las SGs, se ha creado un prototipo para la Web of Energy (WoE) que tiene como objetivo abordar los desafíos presentes en el dominio las SGs. El prototipo es capaz de proporcionar interoperabilidad y homogeneidad entre diversos protocolos. El diseño de implementación se basa en el Modelo de Actores, que también proporciona escalabilidad del prototipo. La experimentación muestra que el prototipo puede manejar la transmisión de mensajes para aplicaciones de las SGs que requieran que la comunicación se realice bajo umbrales de tiempo críticos. También se toma otra dirección de investigación similar, menos centrada en las SGs, pero para una gama más amplia de dominios de aplicación. Se integra la descripción de los flujos de ejecución como máquinas de estados finitos utilizando ontologías web (Resource Description Framework (RDF)) y metodologías de la WoT (las acciones se realizan basándose en peticiones Hyper-Text Transfer Protocol/Secure (HTTP/S) a Uniform Resource Locators (URLs)). Este flujo de ejecución, que también puede ser una plantilla para permitir una configuración flexible en tiempo de ejecución, se implementa e interpreta como si fuera (y a través de) un Virtual Object (VO). El objetivo de la plantilla es que sea reutilizable y se pueda compartir entre múltiples despliegues de la IoT dentro del mismo dominio de aplicación. Debido a las tecnologías utilizadas, la solución no es adecuada para aplicaciones de tiempo crítico (umbral de tiempo relativamente bajo y rígido). Sin embargo, es adecuado para aplicaciones que no demandan respuesta en un tiempo crítico y que requieren el despliegue de VOs similares en cuanto al flujo de ejecución. Finalmente, el trabajo se enfoca en otra tecnología destinada a mejorar la escalabilidad y la capacidad de descubrimiento en la IoT. La SIoT está emergiendo como una nueva estructura de la IoT que une los nodos a través de relaciones significativas. Estas relaciones tienen como objetivo mejorar la capacidad de descubrimiento; en consecuencia, mejora la escalabilidad de una red de la IoT. En este trabajo se aplica este nuevo paradigma para optimizar la gestión de la energía en el lado de la demanda en las SGs. El objetivo es aprovechar las características de la SIoT para ayudar en la creación de Prosumer Community Groups (PCGs) (grupos de usuarios que consumen o producen energía) con el mismo objetivo de optimización en el uso de la energía. La sinergia entre la SIoT y las SGs ha sido denominada Social Internet of Energy (SIoE). Por lo tanto, con la SIoE y con el foco en un desafío específico, se establece la base conceptual para la integración entre la SIoT y las SG. Los experimentos iniciales muestran resultados prometedores y allanan el camino para futuras investigaciones y evaluaciones de la propuesta. Se concluye que la WoT y la SIoT son dos paradigmas complementarios que nutren la evolución de la próxima generación de la IoT. Se espera que la próxima generación de la IoT sea un Multi-Agent System (MAS) generalizado. Algunos investigadores ya están apuntando a la Web y sus tecnologías (por ejemplo,Web Semántica, HTTP/S)—y más concretamente a la WoT — como el entorno que nutra a estos agentes. La SIoT puede mejorar tanto el entorno como las relaciones entre los agentes en esta fusión. Como un campo específico de la IoT, las SGs también pueden beneficiarse de los avances de la IoT.This thesis deals with two novel Internet of Things (IoT) technologies and their integration to the field of the Smart Grid (SG); these technologies are the Web of Things (WoT) and the Social Internet of Things (SIoT). The WoT is an enabling technology expected to provide a scalable and interoperable environment to the IoT using the existing web infrastructure, web protocols and the semantic web. The SIoT is expected to expand further and contribute to scalability and discoverability challenges by creating a social network of agents (objects and humans). When exploring the synergy between those technologies, we aim at providing practical and empirical evidence, usually in the form of prototype implementations and empirical experimentation. In relation to the WoT and SG, we create a prototype for the Web of Energy (WoE), that aims at addressing challenges present in the SG domain. The prototype is capable of providing interoperability and homogeneity among diverse protocols. The implementation design is based on the Actor Model, which also provides scalability in regards to the prototype. Experimentation shows that the prototype can handle the transmission of messages for time-critical SG applications. We also take another similar research direction less focused on the SG, but for a broader range of application domains. We integrate the description of flows of execution as Finite-State Machines (FSMs) using web ontologies (Resource Description Framework (RDF)) and WoT methodologies (actions are performed on the basis of calls Hyper Text Transfer Protocol/ Secure (HTTP/S) to a Uniform Resource Locator (URL)). This execution flow, which can also be a template to allow flexible configuration at runtime, is deployed and interpreted as (and through) a Virtual Object (VO). The template aims to be reusable and shareable among multiple IoT deployments within the same application domain. Due to the technologies used, the solution is not suitable for time-critical applications. Nevertheless, it is suitable for non-time-critical applications that require the deployment of similar VOs. Finally, we focus on another technology aimed at improving scalability and discoverability in IoT. The SIoT is emerging as a new IoT structure that links nodes through meaningful relationships. These relationships aim at improving discoverability; consequently, improving the scalability of an IoT network. We apply this new paradigm to optimize energy management at the demand side in a SG. Our objective is to harness the features of the SIoT to aid in the creation of Prosumer Community Group (PCG) (groups of energy users that consume or produce energy) with the same Demand Side Management (DSM) goal. We refer to the synergy between SIoT and SG as Social Internet of Energy (SIoE). Therefore, with the SIoE and focusing on a specific challenge, we set the conceptual basis for the integration between SIoT and SG. Initial experiments show promising results and pave the way for further research and evaluation of the proposal. We conclude that the WoT and the SIoT are two complementary paradigms that nourish the evolution of the next generation IoT. The next generation IoT is expected to be a pervasive Multi-Agent System (MAS). Some researchers are already pointing at the Web and its technologies (e.g. Semantic Web, HTTP/S) — and more concretely at the WoT — as the environment nourishing the agents. The SIoT can enhance both the environment and the relationships between agents in this fusion. As a specific field of the IoT, the SG can also benefit from IoT advancements
    corecore