5,718 research outputs found

    Addiction in Europe, 1860s-1960s: Concepts and Responses in Italy, Poland, Austria, and the United Kingdom

    Get PDF
    Concepts play a central part in the formulation of problems and proposed solutions to the use of substances. This article reports the initial results from a cross European historical study, carried out to a common methodology, of the language of addiction and policy responses in two key periods, 1860–1930 and the 1950s and 1960s. It concludes that the language of addiction was varied and nonstandard in the first period. The Anglo-American model of inebriety did not apply across Europe but there was a common focus on theories of heredity and national degeneration. After World War II, there was a more homogenous language but still distinct national differences in emphasis and national interests and policy responses to different substances. More research will be needed to deepen understanding of the conditions under which these changes took place and the social and policy appeal of disease theories

    Safety in wine production. A pilot study on the quality evaluation of prosecco wine in the framework of ue regulation

    Get PDF
    In Italy, wine production is considered a sector of excellence, where the wines’ appreciable sensory features are favored by environmental factors, including weather and climate conditions, which benefit territories with a specific vocation. The whole chain involves many economic and agri-food sector operators, and requires an in-depth assessment of specific risks for identifying critical points, keeping the entire production process under control, and ensuring product traceability. This article describes the results of a pilot study conducted in the Prosecco DOCG (Designations of Controlled and Guaranteed Origin) area, concerning the detection of residues of plant protection products in fifty wine bottles. Although considerably below the maximum residue levels, all the samples tested were positive, ranging from two to five active substances detected in each sample. In addition to the provisions of the European Community legislation, this paper critically evaluates some best practices models that are already used by the Wine Federations of Italy, with the aim of identifying advantages of and areas for improvement in production methods, applicable to raw materials reception, rasping, storage, and bottling phases, in order to guarantee product safety and quality

    ATP Release from Dying Autophagic Cells and Their Phagocytosis Are Crucial for Inflammasome Activation in Macrophages

    Get PDF
    Pathogen-activated and damage-associated molecular patterns activate the inflammasome in macrophages. We report that mouse macrophages release IL-1β while co-incubated with pro-B (Ba/F3) cells dying, as a result of IL-3 withdrawal, by apoptosis with autophagy, but not when they are co-incubated with living, apoptotic, necrotic or necrostatin-1 treated cells. NALP3-deficient macrophages display reduced IL-1β secretion, which is also inhibited in macrophages deficient in caspase-1 or pre-treated with its inhibitor. This finding demonstrates that the inflammasome is activated during phagocytosis of dying autophagic cells. We show that activation of NALP3 depends on phagocytosis of dying cells, ATP release through pannexin-1 channels of dying autophagic cells, P2X7 purinergic receptor activation, and on consequent potassium efflux. Dying autophagic Ba/F3 cells injected intraperitoneally in mice recruit neutrophils and thereby induce acute inflammation. These findings demonstrate that NALP3 performs key upstream functions in inflammasome activation in mouse macrophages engulfing dying autophagic cells, and that these functions lead to pro-inflammatory responses

    Spin, charge and orbital ordering in ferrimagnetic insulator YBaMn2_2O5_5

    Full text link
    The oxygen-deficient (double) perovskite YBaMn2_2O5_5, containing corner-linked MnO5_5 square pyramids, is found to exhibit ferrimagnetic ordering in its ground state. In the present work we report generalized-gradient-corrected, relativistic first-principles full-potential density-functional calculations performed on YBaMn2_2O5_5 in the nonmagnetic, ferromagnetic and ferrimagnetic states. The charge, orbital and spin orderings are explained with site-, angular momentum- and orbital-projected density of states, charge-density plots, electronic structure and total energy studies. YBaMn2_2O5_5 is found to stabilize in a G-type ferrimagnetic state in accordance with experimental results. The experimentally observed insulating behavior appears only when we include ferrimagnetic ordering in our calculation. We observed significant optical anisotropy in this material originating from the combined effect of ferrimagnetic ordering and crystal field splitting. In order to gain knowledge about the presence of different valence states for Mn in YBaMn2_2O5_5 we have calculated KK-edge x-ray absorption near-edge spectra for the Mn and O atoms. The presence of the different valence states for Mn is clearly established from the x-ray absorption near-edge spectra, hyperfine field parameters and the magnetic properties study. Among the experimentally proposed structures, the recently reported description based on PP4/nmmnmm is found to represent the stable structure

    Probing Ca3Ti2O7Ca_3Ti_2O_7 crystal structure at the atomic level: Insights from 111mCd/111Cd^{111m}Cd/^{111}Cd PAC spectroscopy and ab-initio studies

    Full text link
    Perturbed angular correlation spectroscopy combined with abinitioab-initio electronic structure calculations is used to unravel the structural phase transition path from the low-temperature polar structure to the high-temperature structural phase in Ca3Ti2O7Ca_3Ti_2O_7, a hybrid improper ferroelectric. This procedure explores the unique features of a local probe environment approach by monitoring the evolution of the electric field gradient tensor at the calcium sites. The local environments, observed above 1057 K, confirm a structural phase transition from the A21amA2_1am symmetry to an orthorhombic AcaaAcaa symmetry in the Ca3Ti2O7Ca_3Ti_2O_7 crystal lattice, disagreeing with the frequently reported avalanche structural transition from the polar A21amA2_1am phase to the aristotype I4/mmmI4/mmm phase. Moreover, the EFG temperature dependency, within the A21amA2_1am temperature stability, is shown to be sensitive to the recently proposed Ca3Ti2O7Ca_3Ti_2O_7 ferroelectric polarization decrease within the 500-800~K temperature range

    The Second Transmembrane Domain of P2X7 Contributes to Dilated Pore Formation

    Get PDF
    Activation of the purinergic receptor P2X7 leads to the cellular permeability of low molecular weight cations. To determine which domains of P2X7 are necessary for this permeability, we exchanged either the C-terminus or portions of the second transmembrane domain (TM2) with those in P2X1 or P2X4. Replacement of the C-terminus of P2X7 with either P2X1 or P2X4 prevented surface expression of the chimeric receptor. Similarly, chimeric P2X7 containing TM2 from P2X1 or P2X4 had reduced surface expression and no permeability to cationic dyes. Exchanging the N-terminal 10 residues or C-terminal 14 residues of the P2X7 TM2 with the corresponding region of P2X1 TM2 partially restored surface expression and limited pore permeability. To further probe TM2 structure, we replaced single residues in P2X7 TM2 with those in P2X1 or P2X4. We identified multiple substitutions that drastically changed pore permeability without altering surface expression. Three substitutions (Q332P, Y336T, and Y343L) individually reduced pore formation as indicated by decreased dye uptake and also reduced membrane blebbing in response to ATP exposure. Three others substitutions, V335T, S342G, and S342A each enhanced dye uptake, membrane blebbing and cell death. Our results demonstrate a critical role for the TM2 domain of P2X7 in receptor function, and provide a structural basis for differences between purinergic receptors. © 2013 Sun et al

    Precise measurement of the W-boson mass with the CDF II detector

    Get PDF
    We have measured the W-boson mass MW using data corresponding to 2.2/fb of integrated luminosity collected in proton-antiproton collisions at 1.96 TeV with the CDF II detector at the Fermilab Tevatron collider. Samples consisting of 470126 W->enu candidates and 624708 W->munu candidates yield the measurement MW = 80387 +- 12 (stat) +- 15 (syst) = 80387 +- 19 MeV. This is the most precise measurement of the W-boson mass to date and significantly exceeds the precision of all previous measurements combined

    Measurement of the t t-bar production cross section in the dilepton channel in pp collisions at sqrt(s) = 7 TeV

    Get PDF
    The t t-bar production cross section (sigma[t t-bar]) is measured in proton-proton collisions at sqrt(s) = 7 TeV in data collected by the CMS experiment, corresponding to an integrated luminosity of 2.3 inverse femtobarns. The measurement is performed in events with two leptons (electrons or muons) in the final state, at least two jets identified as jets originating from b quarks, and the presence of an imbalance in transverse momentum. The measured value of sigma[t t-bar] for a top-quark mass of 172.5 GeV is 161.9 +/- 2.5 (stat.) +5.1/-5.0 (syst.) +/- 3.6(lumi.) pb, consistent with the prediction of the standard model.Comment: Replaced with published version. Included journal reference and DO
    corecore