Functionalization of particles and selective functionalization of surfaces for the electroless metal plating process

Electroless plating is a metal deposition technique widely used in the coating industry. It is the method of choice to plate substrates with complex geometries and nonconductive surfaces, such as polymers and ceramics, since it is based on a chemical reduction in solution rather than on an external electrical energy source like the electroplating method. Among others, examples of well-established applications are the electroless deposition of decorative metal coatings such as gold and silver, wear and corrosion resistant nickel coatings, particularly to coat drive shafts, rotors, and bathroom fixtures, as well as the electroless deposition of copper in electronic devices as diffusion barriers and conductive circuit elements. In the academic research, electroless plating is extensively used thanks to its low cost, simple equipment and versatility that allow rapid prototyping. Two common applications are the coating of small particles and the selective plating of flat surfaces. Metal coated ceramic particles are of enormous interest in many scientific fields, e.g. fluorescent diagnostics in biochemistry, catalysis, and fabrication of photonic crystals. Metal coated ceramic nanoparticles and microparticles are also gaining attention as potential candidates in the fabrication of higher quality metal matrix Composites, which is one of the applications addressed by this work. Metal coated ceramic particles are easier to integrate in metal matrix composites, avoiding aggregation caused by the low wettability of the particles by the matrix metal, and are potentially shielded from oxidation and undesired chemical reactions that take place at the interface between the particles and the metal Matrix. Electroless plating is an autocatalytic process, meaning that the deposited metal atoms catalyze the deposition of further metal. In order to achieve the first stable metal seeds on a surface, the latter has to be functionalized. Without this functionalization the metal ions in the electroless plating bath are not reduced or are simply reduced to metal nanoparticles in solution. The traditional activation step for nonconductive surfaces is performed by immersion of the substrate in palladium based solutions, which is very time-consuming and extremely expensive. In particular for nanoparticles, previous work showed that at least 1015 Pd atoms/cm2 are required for a uniform activation of a surface, meaning that in the case of nanoparticles with a surface area of about 100 m2/g are necessary 6.4 g of palladium for each gram of substrate. Assuming a price of about 150 €/g (laboratory scale) for palladium nanoparticles and palladium precursors used for surface activation, it results that the activation of 1 g of nanoparticles costs around 1000 €. Such costs are suboptimal considering the typical production scale, and therefore alternative functionalization methods are desired. In this work, new organic-based functionalization methods based on (3-mercaptopropyl)triethoxysilane to functionalize oxide particles, 3-aminopropylphosphonic acid to activate carbide particles and a substrate-independent method based on the bioinspired polydopamine are developed and investigated in detail, together with the respective electroless plating baths, which often have to be specifically tailored regarding the different reactivity of the different molecules and substrates. Furthermore, in the fabrication of metallic patterns on substrates by electroless plating, new, simple, and cost-effective activation and metal deposition processes are desired. In this work, two new methods are presented, one based on the printing of (3-mercaptopropyl)triethoxysilane by microcontact printing, the other based on the capillary force lithography of polymethylmethacrylate

Analisi tecnico-economica degli impianti di servizio -sviluppo dei modelli di costo dei componenti -progettazione integrata degli impianti di servizio

openFULL TEX

Search for gravitational waves from Scorpius X-1 in the second Advanced LIGO observing run with an improved hidden Markov model

We present results from a semicoherent search for continuous gravitational waves from the low-mass x-ray binary Scorpius X-1, using a hidden Markov model (HMM) to track spin wandering. This search improves on previous HMM-based searches of LIGO data by using an improved frequency domain matched filter, the J-statistic, and by analyzing data from Advanced LIGO's second observing run. In the frequency range searched, from 60 to 650 Hz, we find no evidence of gravitational radiation. At 194.6 Hz, the most sensitive search frequency, we report an upper limit on gravitational wave strain (at 95% confidence) of h095%=3.47×10-25 when marginalizing over source inclination angle. This is the most sensitive search for Scorpius X-1, to date, that is specifically designed to be robust in the presence of spin wandering. © 2019 American Physical Society

Search for gravitational waves from Scorpius X-1 in the second Advanced LIGO observing run with an improved hidden Markov model

We present results from a semicoherent search for continuous gravitational waves from the low-mass x-ray binary Scorpius X-1, using a hidden Markov model (HMM) to track spin wandering. This search improves on previous HMM-based searches of LIGO data by using an improved frequency domain matched filter, the J-statistic, and by analyzing data from Advanced LIGO’s second observing run. In the frequency range searched, from 60 to 650 Hz, we find no evidence of gravitational radiation. At 194.6 Hz, the most sensitive search frequency, we report an upper limit on gravitational wave strain (at 95% confidence) of h95%0=3.47×10−25 when marginalizing over source inclination angle. This is the most sensitive search for Scorpius X-1, to date, that is specifically designed to be robust in the presence of spin wandering

Erratum: “Searches for Gravitational Waves from Known Pulsars at Two Harmonics in 2015–2017 LIGO Data” (2019, ApJ, 879, 10)

Due to an error at the publisher, in the published article the number of pulsars presented in the paper is incorrect in multiple places throughout the text. Specifically, "222" pulsars should be "221." Additionally, the number of pulsars for which we have EM observations that fully overlap with O1 and O2 changes from "168" to "167." Elsewhere, in the machine-readable table of Table 1 and in Table 2, the row corresponding to pulsar J0952-0607 should be excised as well. Finally, in the caption for Table 2 the number of pulsars changes from "188" to "187.

Erratum: "A Gravitational-wave Measurement of the Hubble Constant Following the Second Observing Run of Advanced LIGO and Virgo" (2021, ApJ, 909, 218)

[no abstract available

The population of merging compact binaries inferred using gravitational waves through GWTC-3

We report on the population properties of 76 compact binary mergers detected with gravitational waves below a false alarm rate of 1 per year through GWTC-3. The catalog contains three classes of binary mergers: BBH, BNS, and NSBH mergers. We infer the BNS merger rate to be between 10 $\rm{Gpc^{-3} yr^{-1}}$ and 1700 $\rm{Gpc^{-3} yr^{-1}}$ and the NSBH merger rate to be between 7.8 $\rm{Gpc^{-3}\, yr^{-1}}$ and 140 $\rm{Gpc^{-3} yr^{-1}}$ , assuming a constant rate density versus comoving volume and taking the union of 90% credible intervals for methods used in this work. Accounting for the BBH merger rate to evolve with redshift, we find the BBH merger rate to be between 17.9 $\rm{Gpc^{-3}\, yr^{-1}}$ and 44 $\rm{Gpc^{-3}\, yr^{-1}}$ at a fiducial redshift (z=0.2). We obtain a broad neutron star mass distribution extending from $1.2^{+0.1}_{-0.2} M_\odot$ to $2.0^{+0.3}_{-0.3} M_\odot$. We can confidently identify a rapid decrease in merger rate versus component mass between neutron star-like masses and black-hole-like masses, but there is no evidence that the merger rate increases again before 10 $M_\odot$. We also find the BBH mass distribution has localized over- and under-densities relative to a power law distribution. While we continue to find the mass distribution of a binary's more massive component strongly decreases as a function of primary mass, we observe no evidence of a strongly suppressed merger rate above $\sim 60 M_\odot$. The rate of BBH mergers is observed to increase with redshift at a rate proportional to $(1+z)^{\kappa}$ with $\kappa = 2.9^{+1.7}_{-1.8}$ for $z\lesssim 1$. Observed black hole spins are small, with half of spin magnitudes below $\chi_i \simeq 0.25$. We observe evidence of negative aligned spins in the population, and an increase in spin magnitude for systems with more unequal mass ratio

Searches for gravitational waves from known pulsars at two harmonics in 2015-2017 LIGO data

International audienceWe present a search for gravitational waves from 222 pulsars with rotation frequencies ≳10 Hz. We use advanced LIGO data from its first and second observing runs spanning 2015–2017, which provides the highest-sensitivity gravitational-wave data so far obtained. In this search we target emission from both the l = m = 2 mass quadrupole mode, with a frequency at twice that of the pulsar’s rotation, and the l = 2, m = 1 mode, with a frequency at the pulsar rotation frequency. The search finds no evidence for gravitational-wave emission from any pulsar at either frequency. For the l = m = 2 mode search, we provide updated upper limits on the gravitational-wave amplitude, mass quadrupole moment, and fiducial ellipticity for 167 pulsars, and the first such limits for a further 55. For 20 young pulsars these results give limits that are below those inferred from the pulsars’ spin-down. For the Crab and Vela pulsars our results constrain gravitational-wave emission to account for less than 0.017% and 0.18% of the spin-down luminosity, respectively. For the recycled millisecond pulsar J0711−6830 our limits are only a factor of 1.3 above the spin-down limit, assuming the canonical value of 1038 kg m2 for the star’s moment of inertia, and imply a gravitational-wave-derived upper limit on the star’s ellipticity of 1.2 × 10−8. We also place new limits on the emission amplitude at the rotation frequency of the pulsars

GW190412: Observation of a Binary-Black-Hole Coalescence with Asymmetric Masses

We report the observation of gravitational waves from a binary-black-hole coalescence during the first two weeks of LIGO’s and Virgo’s third observing run. The signal was recorded on April 12, 2019 at 05∶30∶44 UTC with a network signal-to-noise ratio of 19. The binary is different from observations during the first two observing runs most notably due to its asymmetric masses: a ∼30 M_⊙ black hole merged with a ∼8 M_⊙ black hole companion. The more massive black hole rotated with a dimensionless spin magnitude between 0.22 and 0.60 (90% probability). Asymmetric systems are predicted to emit gravitational waves with stronger contributions from higher multipoles, and indeed we find strong evidence for gravitational radiation beyond the leading quadrupolar order in the observed signal. A suite of tests performed on GW190412 indicates consistency with Einstein’s general theory of relativity. While the mass ratio of this system differs from all previous detections, we show that it is consistent with the population model of stellar binary black holes inferred from the first two observing runs

Properties and Astrophysical Implications of the 150 M_⊙ Binary Black Hole Merger GW190521

The gravitational-wave signal GW190521 is consistent with a binary black hole (BBH) merger source at redshift 0.8 with unusually high component masses, 85⁺²¹₋₁₄ M_⊙ and 66⁺¹⁷₋₁₈ M_⊙, compared to previously reported events, and shows mild evidence for spin-induced orbital precession. The primary falls in the mass gap predicted by (pulsational) pair-instability supernova theory, in the approximate range 65–120 M_⊙. The probability that at least one of the black holes in GW190521 is in that range is 99.0%. The final mass of the merger 142⁺²⁸₋₁₆ M_⊙) classifies it as an intermediate-mass black hole. Under the assumption of a quasi-circular BBH coalescence, we detail the physical properties of GW190521's source binary and its post-merger remnant, including component masses and spin vectors. Three different waveform models, as well as direct comparison to numerical solutions of general relativity, yield consistent estimates of these properties. Tests of strong-field general relativity targeting the merger-ringdown stages of the coalescence indicate consistency of the observed signal with theoretical predictions. We estimate the merger rate of similar systems to be 0.13_(-0.11)^(+0.30) Gpc⁻³ yr⁻¹. We discuss the astrophysical implications of GW190521 for stellar collapse and for the possible formation of black holes in the pair-instability mass gap through various channels: via (multiple) stellar coalescences, or via hierarchical mergers of lower-mass black holes in star clusters or in active galactic nuclei. We find it to be unlikely that GW190521 is a strongly lensed signal of a lower-mass black hole binary merger. We also discuss more exotic possible sources for GW190521, including a highly eccentric black hole binary, or a primordial black hole binary