78 research outputs found
Data Centric Peer-to-Peer Communication in Power Grids
We study the use of peer-to-peer based declarative data management to enable efficient monitoring and control of power transmission and distribution networks.
We propose methods and an architecture for data centric communication in power networks; a proof-of-concept decentralized communication infrastructure is presented that uses and advances state of the art peer-to-peer and distributed data management protocols to provide real time access to network state information. We propose methods for adaptive network reconfiguration and self-repair mechanisms
to handle fault situations. To efficiently handle complex queries, we present a centralized metadata index, and propose a query language and execution method that allows us to handle high volume data streams in-network
Development of a laser powder bed fusion process tailored for the additive manufacturing of high-quality components made of the commercial magnesium alloy WE43
Additive manufacturing (AM) has become increasingly important over the last decade and the quality of the products generated with AM technology has strongly improved. The most common metals that are processed by AM techniques are steel, titanium (Ti) or aluminum (Al) alloys. However, the proportion of magnesium (Mg) in AM is still negligible, possibly due to the poor processability of Mg in comparison to other metals. Mg parts are usually produced by various casting processes and the experiences in additive manufacturing of Mg are still limited. To address this issue, a parameter screening was conducted in the present study with experiments designed to find the most influential process parameters. In a second step, these parameters were optimized in order to fabricate parts with the highest relative density. This experiment led to processing parameters with which specimens with relative densities above 99.9% could be created. These highdensity specimens were then utilized in the fabrication of test pieces with several different geometries, in order to compare the material properties resulting from both the casting process and the powder bed fusion (PBF-LB) process. In this comparison, the compositions of the occurring phases and the alloys’ microstructures as well as the mechanical properties were investigated. Typically, the microstructure of metal parts, produced by PBF-LB, consisted of much finer grains compared to as-cast parts. Consequently, the strength of Mg parts generated by PBF-LB could be further increased. © 2021 by the authors. Licensee MDPI, Basel, Switzerland
parMERASA Multi-Core Execution of Parallelised Hard Real-Time Applications Supporting Analysability
International audienceEngineers who design hard real-time embedded systems express a need for several times the performance available today while keeping safety as major criterion. A breakthrough in performance is expected by parallelizing hard real-time applications and running them on an embedded multi-core processor, which enables combining the requirements for high-performance with timing-predictable execution. parMERASA will provide a timing analyzable system of parallel hard real-time applications running on a scalable multicore processor. parMERASA goes one step beyond mixed criticality demands: It targets future complex control algorithms by parallelizing hard real-time programs to run on predictable multi-/many-core processors. We aim to achieve a breakthrough in techniques for parallelization of industrial hard real-time programs, provide hard real-time support in system software, WCET analysis and verification tools for multi-cores, and techniques for predictable multi-core designs with up to 64 cores
Syn-orogenic high-temperature crustal melting: Geochronological and Nd-Sr-Pb isotope constraints from basement-derived granites (Central Damara Orogen, Namibia)
Major and trace element and Nd, Sr and Pb isotope data from c. 550 Ma-old gray granites and c. 510 Ma-old red leucogranites of the high-grade central part of the Damara orogen (Namibia) indicate a dominantly deep crustal origin. Moderately peraluminous gray granites are isotopically evolved (initial epsilon(Nd): C. - 17) and were likely derived from meta-igneous sources with late Archean to Paleoproterozoic crustal residence ages. Based on a comparison with experimental results, the granites were derived by partial melting of a granodioritic biotite gneiss at c. 900-950 degrees C and less than 10 kbar. Slightly peraluminous red leucogranites are also isotopically evolved (initial epsilon(Nd): - 15 to - 18) but have undergone extensive crystal fractionation coupled with minor contamination of mid crustal meta-pelitic material. Major and trace element data do not support closed-system fractional crystallization processes for all samples, however, some chemical features underline the importance of crystal fractionation processes especially for the leucogranites. Isotope data do not support mixing of different crust-derived melts or assimilation of crustal rocks by a mafic magma on a large scale. For the gray granites, unradiogenic Pb isotope compositions with substantial variation in Pb-207/Pb-204 at almost constant (206)pb/(204)pb, strongly negative epsilon(Nd) values and moderately radiogenic Sr isotope compositions argue for an undepleted nature of the source. High Rb/Sr ratios of the red leucogranites permit a comparison with the gray granites but similar initial ENd values indicate that the source of these granites is not fundamentally different to the source of the gray granites. The most acceptable model for both granite types involves partial melting of meta-igneous basement rocks of Archean to Proterozoic age. The consistency of the chemical data with a crustal anatectic origin and the observation that the gray granites intruded before the first peak of high-grade regional metamorphism suggests that they intruded simultaneously with crustal thickening. The red leucogranites are interpreted to be a result of crustal melting during the main peak of regional metamorphism. The heating events that promoted melting of fertile deep-crustal rocks might have been caused by the inferred high heat productivity of heat-producing radioactive elements (Th, U, K) together with crustal thickening during the main periods of orogen
VDES J2325−5229 a z = 2.7 gravitationally lensed quasar discovered using morphology-independent supervised machine learning
We present the discovery and preliminary characterization of a gravitationally lensed quasar with a source redshift zs = 2.74 and image separation of 2.9 arcsec lensed by a foreground zl = 0.40 elliptical galaxy. Since optical observations of gravitationally lensed quasars showthe lens system as a superposition of multiple point sources and a foreground lensing galaxy, we have developed a morphology-independent multi-wavelength approach to the photometric selection of lensed quasar candidates based on Gaussian Mixture Models (GMM) supervised machine learning. Using this technique and gi multicolour photometric observations from the Dark Energy Survey (DES), near-IR JK photometry from the VISTA Hemisphere Survey (VHS) and WISE mid-IR photometry, we have identified a candidate system with two catalogue components with iAB = 18.61 and iAB = 20.44 comprising an elliptical galaxy and two blue point sources. Spectroscopic follow-up with NTT and the use of an archival AAT spectrum show that the point sources can be identified as a lensed quasar with an emission line redshift of z = 2.739 ± 0.003 and a foreground early-type galaxy with z = 0.400 ± 0.002.We model the system as a single isothermal ellipsoid and find the Einstein radius θE ∼ 1.47 arcsec, enclosed mass Menc ∼ 4 × 1011 M and a time delay of ∼52 d. The relatively wide separation, month scale time delay duration and high redshift make this an ideal system for constraining the expansion rate beyond a redshift of 1
Searching for dark matter annihilation in recently discovered Milky Way satellites with Fermi-LAT
We search for excess γ-ray emission coincident with the positions of confirmed and candidate Milky Way satellite galaxies using six years of data from the Fermi Large Area Telescope (LAT). Our sample of 45 stellar systems includes 28 kinematically confirmed dark-matter-dominated dwarf spheroidal galaxies (dSphs) and 17 recently discovered systems that have photometric characteristics consistent with the population of known dSphs. For each of these targets, the relative predicted γ-ray flux due to dark matter annihilation is taken from kinematic analysis if available, and estimated from a distance-based scaling relation otherwise, assuming that the stellar systems are DM-dominated dSphs. LAT data coincident with four of the newly discovered targets show a slight preference (each ~2σ local) for γ-ray emission in excess of the background. However, the ensemble of derived γ-ray flux upper limits for individual targets is consistent with the expectation from analyzing random blank-sky regions, and a combined analysis of the population of stellar systems yields no globally significant excess (global significance 1 TeV and mDM,t+t-> 70 GeV) and weakening by a factor of ~1.5 at lower masses relative to previously observed limits
Redshift distributions of galaxies in the Dark Energy Survey Science Verification shear catalogue and implications for weak lensing
We present photometric redshift estimates for galaxies used in the weak lensing analysis of the Dark Energy Survey Science Verification (DES SV) data. Four model- or machine learning-based photometric redshift methods—ANNZ2, BPZ calibrated against BCC-Ufig simulations, SKYNET, and TPZ—are analyzed. For training, calibration, and testing of these methods, we construct a catalogue of spectroscopically confirmed galaxies matched against DES SV data. The performance of the methods is evaluated against the matched spectroscopic catalogue, focusing on metrics relevant for weak lensing analyses, with additional validation against COSMOS photo-z’s. From the galaxies in the DES SV shear catalogue, which have mean redshift 0.72 0.01 over the range 0.3 < z < 1.3, we construct three tomographic bins with means of z ¼ f0.45; 0.67; 1.00g. These bins each have systematic uncertainties δz ≲ 0.05 in the mean of the fiducial SKYNET photo-z nðzÞ. We propagate the errors in the redshift distributions through to their impact on cosmological parameters estimated with cosmic shear, and find that they cause shifts in the value of σ8 of approximately 3%. This shift is within the one sigma statistical errors on σ8 for the DES SV shear catalogue. We further study the potential impact of systematic differences on the critical surface density, Σcrit, finding levels of bias safely less than the statistical power of DES SV data. We recommend a final Gaussian prior for the photo-z bias in the mean of nðzÞ of width 0.05 for each of the three tomographic bins, and show that this is a sufficient bias model for the corresponding cosmology analysis
The Dark Energy Survey : more than dark energy – an overview
This overview paper describes the legacy prospect and discovery potential of the Dark Energy Survey (DES) beyond cosmological studies, illustrating it with examples from the DES early data. DES is using a wide-field camera (DECam) on the 4 m Blanco Telescope in Chile to image 5000 sq deg of the sky in five filters (grizY). By its completion, the survey is expected to have generated a catalogue of 300 million galaxies with photometric redshifts and 100 million stars. In addition, a time-domain survey search over 27 sq deg is expected to yield a sample of thousands of Type Ia supernovae and other transients. The main goals of DES are to characterize dark energy and dark matter, and to test alternative models of gravity; these goals will be pursued by studying large-scale structure, cluster counts, weak gravitational lensing and Type Ia supernovae. However, DES also provides a rich data set which allows us to study many other aspects of astrophysics. In this paper, we focus on additional science with DES, emphasizing areas where the survey makes a difference with respect to other current surveys. The paper illustrates, using early data (from ‘Science Verification’, and from the first, second and third seasons of observations), what DES can tell us about the Solar system, the Milky Way, galaxy evolution, quasars and other topics. In addition, we show that if the cosmological model is assumed to be +cold dark matter, then important astrophysics can be deduced from the primary DES probes. Highlights from DES early data include the discovery of 34 trans-Neptunian objects, 17 dwarf satellites of the Milky Way, one published z > 6 quasar (and more confirmed) and two published superluminous supernovae (and more confirmed)
Introduction to Surface Avatar: the First Heterogeneous Robotic Team to be Commanded with Scalable Autonomy from the ISS
Robotics is vital to the continued development toward Lunar and Martian exploration, in-situ resource utilization, and surface infrastructure construction. Large-scale extra-terrestrial missions will require teams of robots with different, complementary capabilities, together with a powerful, intuitive user interface for effective commanding. We introduce Surface Avatar, the newest ISS-to-Earth telerobotic experiment series, to be conducted in 2022-2024. Spearheaded by DLR, together with ESA, Surface Avatar builds on expertise on commanding robots with different levels of autonomy from our past telerobotic experiments: Kontur-2, Haptics, Interact, SUPVIS Justin, and Analog-1. A team of four heterogeneous robots in a multi-site analog environment at DLR are at the command of a crew member on the ISS. The team has a humanoid robot for dexterous object handling, construction and maintenance; a rover for long traverses and sample acquisition; a quadrupedal robot for scouting and exploring difficult terrains; and a lander with robotic arm for component delivery and sample stowage. The crew's command terminal is multimodal, with an intuitive graphical user interface, 3-DOF joystick, and 7-DOF input device with force-feedback. The autonomy of any robot can be scaled up and down depending on the task and the astronaut's preference: acting as an avatar of the crew in haptically-coupled telepresence, or receiving task-level commands like an intelligent co-worker. Through crew performing collaborative tasks in exploration and construction scenarios, we hope to gain insight into how to optimally command robots in a future space mission. This paper presents findings from the first preliminary session in June 2022, and discusses the way forward in the planned experiment sessions
DNA Glycosylases Involved in Base Excision Repair May Be Associated with Cancer Risk in BRCA1 and BRCA2 Mutation Carriers
Peer reviewe
- …