Effect of incremental static damage on modal frequencies of reinforced concrete beams

The modelling and the failure mechanisms of RC structures is a complex phenomenon because the constituent materials’ strengths are combined to overcome their weaknesses. Therefore, the failure mechanisms have not been understood completely. Modelling concrete beams using plasticity approaches has gained a lot of attention because of its versatility. This research incorporates the plasticity model with continuum damage model to evaluate the modal frequency deterioration of the reinforced beams. These beams were incrementally damaged in flexure using finite element modelling. It was observed that the model represents the damage mechanism of RC beams quite reasonably. The dynamic response of the beams is also in line with the experimental results. Based on the dynamic response, it was observed that the modal frequencies are sensitive to damage at initial stages and there is not significant reduction in the natural frequencies at complete damage

Inter-rater reliability of vehicle color perception for forensic intelligence

The topcoat color of motor vehicles offers vital information while investigating vehicular accidents, especially in instance of hit-and-run, since witnesses seldom perceive and retain the plate details. Differences in color perceptions among individuals with normal vision may lead to confusion in determining the color of the car involved. In this way, witnesses of crash accidents could potentially initiate flawed leads in forensic investigation, and thus affect the administration of justice. In this study, the inter-rater reliability of vehicle color determination by different volunteers was explored. Six individuals observed the topcoat colors of 500 stationary and 500 moving vehicles from five locations, employing a common system of color gradation. The outcome was binary: the vehicle color was either a “match” or “non-match”. This was followed by statistical analysis in terms of the colors’ frequencies and inter-rater reliability, based on which more suitable color descriptions were determined for subsequent comparisons of stationary and moving vehicles. Higher match frequencies and greater interrater reliability were observed when color gradations were disregarded. The frequency of correct matches could have been closely related to their relative on-the-road distribution, regardless of the statuses of observed vehicles. It was also found that black and white were associated with a greater number of matches than were intermediate colors, which should be carefully interpreted during forensic investigation to avoid wrong leads. In conclusion, the present study demonstrated the forensic significance of vehicle topcoat color determination, particularly in cases where witness statements are crucial

Estimating PM 2.5 concentrations in Xi'an City using a generalized additive model with multi-source monitoring data

© 2015 Song et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Particulate matter with an aerodynamic diameter <2.5 μm (PM2.5) represents a severe environmental problem and is of negative impact on human health. Xi'an City, with a population of 6.5 million, is among the highest concentrations of PM2.5 in China. In 2013, in total, there were 191 days in Xi'an City on which PM2.5 concentrations were greater than 100 μg/m3. Recently, a few studies have explored the potential causes of high PM2.5 concentration using remote sensing data such as the MODIS aerosol optical thickness (AOT) product. Linear regression is a commonly used method to find statistical relationships among PM2.5 concentrations and other pollutants, including CO, NO2, SO2, and O3, which can be indicative of emission sources. The relationships of these variables, however, are usually complicated and non-linear. Therefore, a generalized additive model (GAM) is used to estimate the statistical relationships between potential variables and PM2.5 concentrations. This model contains linear functions of SO2 and CO, univariate smoothing non-linear functions of NO2, O3, AOT and temperature, and bivariate smoothing non-linear functions of location and wind variables. The model can explain 69.50% of PM2.5 concentrations, with R2 = 0.691, which improves the result of a stepwise linear regression (R2 = 0.582) by 18.73%. The two most significant variables, CO concentration and AOT, represent 20.65% and 19.54% of the deviance, respectively, while the three other gas-phase concentrations, SO2, NO2, and O3 account for 10.88% of the total deviance. These results show that in Xi'an City, the traffic and other industrial emissions are the primary source of PM2.5. Temperature, location, and wind variables also non-linearly related with PM2.5

Diverse Applications of Nanomedicine

The design and use of materials in the nanoscale size range for addressing medical and health-related issues continues to receive increasing interest. Research in nanomedicine spans a multitude of areas, including drug delivery, vaccine development, antibacterial, diagnosis and imaging tools, wearable devices, implants, high-throughput screening platforms, etc. using biological, nonbiological, biomimetic, or hybrid materials. Many of these developments are starting to be translated into viable clinical products. Here, we provide an overview of recent developments in nanomedicine and highlight the current challenges and upcoming opportunities for the field and translation to the clinic. \ua9 2017 American Chemical Society

Robust estimation of bacterial cell count from optical density

Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals &lt;1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data

A multimodal cell census and atlas of the mammalian primary motor cortex

ABSTRACT We report the generation of a multimodal cell census and atlas of the mammalian primary motor cortex (MOp or M1) as the initial product of the BRAIN Initiative Cell Census Network (BICCN). This was achieved by coordinated large-scale analyses of single-cell transcriptomes, chromatin accessibility, DNA methylomes, spatially resolved single-cell transcriptomes, morphological and electrophysiological properties, and cellular resolution input-output mapping, integrated through cross-modal computational analysis. Together, our results advance the collective knowledge and understanding of brain cell type organization: First, our study reveals a unified molecular genetic landscape of cortical cell types that congruently integrates their transcriptome, open chromatin and DNA methylation maps. Second, cross-species analysis achieves a unified taxonomy of transcriptomic types and their hierarchical organization that are conserved from mouse to marmoset and human. Third, cross-modal analysis provides compelling evidence for the epigenomic, transcriptomic, and gene regulatory basis of neuronal phenotypes such as their physiological and anatomical properties, demonstrating the biological validity and genomic underpinning of neuron types and subtypes. Fourth, in situ single-cell transcriptomics provides a spatially-resolved cell type atlas of the motor cortex. Fifth, integrated transcriptomic, epigenomic and anatomical analyses reveal the correspondence between neural circuits and transcriptomic cell types. We further present an extensive genetic toolset for targeting and fate mapping glutamatergic projection neuron types toward linking their developmental trajectory to their circuit function. Together, our results establish a unified and mechanistic framework of neuronal cell type organization that integrates multi-layered molecular genetic and spatial information with multi-faceted phenotypic properties