610 research outputs found
CD68 and interleukin 13, prospective immune markers for esophageal squamous cell carcinoma prognosis prediction
published_or_final_versio
A new multi-anticipative car-following model with consideration of the desired following distance
We propose in this paper an extension of the multi-anticipative optimal velocity car-following model to consider explicitly the desired following distance. The model on the following vehicle’s acceleration is formulated as a linear function of the optimal velocity and the desired distance, with reaction-time delay in elements. The linear stability condition of the model is derived. The results demonstrate that the stability of traffic flow is improved by introducing the desired following distance, increasing the time gap in the desired following distance or decreasing the reaction-time delay. The simulation results show that by taking into account the desired following distance as well as the optimal velocity, the multi-anticipative model allows longer reaction-time delay in achieving stable traffic flows
In situ production of titanium dioxide nanoparticles in molten salt phase for thermal energy storage and heat-transfer fluid applications
In this study, TiO2 nanoparticles (average particle size 16 nm) were successfully produced in molten salt phase and were showed to significantly enhance the specific heat capacity of a binary eutectic mixture of sodium and potassium nitrate (60/40) by 5.4 % at 390 °C and 7.5 % at 445 °C for 3.0 wt% of precursors used. The objective of this research was to develop a cost-effective alternate method of production which is potentially scalable, as current techniques utilized are not economically viable for large quantities. Enhancing the specific heat capacity of molten salt would promote more competitive pricing for electricity production by concentrating solar power plant. Here, a simple precursor (TiOSO4) was added to a binary eutectic mixture of potassium and sodium nitrate, heated to 450 °C, and cooled to witness the production of nanoparticles
Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV
The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration
Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector
The inclusive and dijet production cross-sections have been measured for jets
containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass
energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The
measurements use data corresponding to an integrated luminosity of 34 pb^-1.
The b-jets are identified using either a lifetime-based method, where secondary
decay vertices of b-hadrons in jets are reconstructed using information from
the tracking detectors, or a muon-based method where the presence of a muon is
used to identify semileptonic decays of b-hadrons inside jets. The inclusive
b-jet cross-section is measured as a function of transverse momentum in the
range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet
cross-section is measured as a function of the dijet invariant mass in the
range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets
and the angular variable chi in two dijet mass regions. The results are
compared with next-to-leading-order QCD predictions. Good agreement is observed
between the measured cross-sections and the predictions obtained using POWHEG +
Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet
cross-section. However, it does not reproduce the measured inclusive
cross-section well, particularly for central b-jets with large transverse
momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final
version published in European Physical Journal
Antibacterial activity of Artemisia nilagirica leaf extracts against clinical and phytopathogenic bacteria
<p>Abstract</p> <p>Background</p> <p>The six organic solvent extracts of <it>Artemisia nilagirica </it>were screened for the potential antimicrobial activity against phytopathogens and clinically important standard reference bacterial strains.</p> <p>Methods</p> <p>The agar disk diffusion method was used to study the antibacterial activity of <it>A. nilagirica </it>extracts against 15 bacterial strains. The Minimum Inhibitory Concentration (MIC) of the plant extracts were tested using two fold agar dilution method at concentrations ranging from 32 to 512 μg/ml. The phytochemical screening of extracts was carried out for major phytochemical derivatives in <it>A. nilagirica</it>.</p> <p>Results</p> <p>All the extracts showed inhibitory activity for gram-positive and gram-negative bacteria except for <it>Klebsiella pneumoniae, Enterococcus faecalis </it>and <it>Staphylococcus aureus</it>. The hexane extract was found to be effective against all phytopathogens with low MIC of 32 μg/ml and the methanol extract exhibited a higher inhibition activity against <it>Escherichia coli, Yersinia enterocolitica, Salmonella typhi</it>, <it>Enterobacter aerogenes</it>, <it>Proteus vulgaris</it>, <it>Pseudomonas aeruginosa </it>(32 μg/ml), <it>Bacillus subtilis </it>(64 μg/ml) and <it>Shigella flaxneri </it>(128 μg/ml). The phytochemical screening of extracts answered for the major derivative of alkaloids, amino acids, flavonoids, phenol, quinines, tannins and terpenoids.</p> <p>Conclusion</p> <p>All the extracts showed antibacterial activity against the tested strains. Of all, methanol and hexane extracts showed high inhibition against clinical and phytopathogens, respectively. The results also indicate the presence of major phytochemical derivatives in the <it>A. nilagirica </it>extracts. Hence, the isolation and purification of therapeutic potential compounds from <it>A. nilagirica </it>could be used as an effective source against bacterial diseases in human and plants.</p
A Novel Peptide Derived from Human Pancreatitis-Associated Protein Inhibits Inflammation In Vivo and In Vitro and Blocks NF-Kappa B Signaling Pathway
BACKGROUND: Pancreatitis-associated protein (PAP) is a pancreatic secretory protein belongs to the group VII of C-type lectin family. Emerging evidence suggests that PAP plays a protective effect in inflammatory diseases. In the present study, we newly identified a 16-amino-acid peptide (named PAPep) derived from C-type lectin-like domain (CTLD) of human PAP with potent anti-inflammatory activity using both in vivo and in vitro assays. METHODOLOGY/PRINCIPAL FINDINGS: We assessed the anti-inflammatory effect of PAPep on endotoxin-induced uveitis (EIU) in rats and demonstrated that intravitreal pretreatment of PAPep concentration-dependently attenuated clinical manifestation of EIU rats, reduced protein leakage and cell infiltration into the aqueous humor (AqH), suppressed tumor necrosis factor (TNF)-α, interleukin (IL)-6, intercellular adhesion molecule-1 (ICAM-1) and monocyte chemoattractant protein (MCP)-1 production in ocular tissues, and improved histopathologic manifestation of EIU. Furthermore, PAPep suppressed the LPS-induced mRNA expression of TNF-α and IL-6 in RAW 264.7 cells, inhibited protein expression of ICAM-1 in TNF-α-stimulated human umbilical vein endothelial cells (HUVECs) as well as U937 cells adhesion to HUVECs. Western blot analysis in ocular tissues and different cell lines revealed that the possible mechanism for this anti-inflammatory effect of PAPep may depend on its ability to inhibit the activation of NF-kB signaling pathway. CONCLUSIONS/SIGNIFICANCE: Our studies provide the first evidence that the sequence of PAPep is within the critically active region for the anti-inflammatory function of PAP and the peptide may be a promising candidate for the management of ocular inflammatory diseases
Overview of biologically digested leachate treatment using adsorption
Biological process is effective in treating most biodegradable organic matter present in leachate; however, a significant amount of ammonia, metals and refractory organic compounds may still remain in this biologically digested leachate. This effluent cannot be released to receiving bodies until the discharge limit is met. Several physical/chemical processes have been practiced as post-treatment to remove the remaining pollutants including coagulation–flocculation, oxidation and adsorption. Adsorption is often applied in leachate treatment as it enhances removal of refractory organic compounds. This chapter will focus on works related to adsorption as one of the commonly used methods to treat biologically digested leachate further down to acceptable discharge limit
- …