Micro-morphologic changes around biophysically-stimulated titanium implants in ovariectomized rats

<p>Abstract</p> <p>Background</p> <p>Osteoporosis may present a risk factor in achievement of osseointegration because of its impact on bone remodeling properties of skeletal phsiology. The purpose of this study was to evaluate micro-morphological changes in bone around titanium implants exposed to mechanical and electrical-energy in osteoporotic rats.</p> <p>Methods</p> <p>Fifteen 12-week old sprague-dowley rats were ovariectomized to develop osteoporosis. After 8 weeks of healing period, two titanium implants were bilaterally placed in the proximal metaphyses of tibia. The animals were randomly divided into a control group and biophysically-stimulated two test groups with five animals in each group. In the first test group, a pulsed electromagnetic field (PEMF) stimulation was administrated at a 0.2 mT 4 h/day, whereas the second group received low-magnitude high-frequency mechanical vibration (MECHVIB) at 50 Hz 14 min/day. Following completion of two week treatment period, all animals were sacrificed. Bone sites including implants were sectioned, removed <it>en bloc </it>and analyzed using a microCT unit. Relative bone volume and bone micro-structural parameters were evaluated for 144 μm wide peri-implant volume of interest (VOI).</p> <p>Results</p> <p>Mean relative bone volume in the peri-implant VOI around implants PEMF and MECHVIB was significantly higher than of those in control (<it>P </it>< .05). Differences in trabecular-thickness and -separation around implants in all groups were similar (<it>P </it>> .05) while the difference in trabecular-number among test and control groups was significant in all VOIs (<it>P </it>< .05).</p> <p>Conclusion</p> <p>Biophysical stimulation remarkably enhances bone volume around titanium implants placed in osteoporotic rats. Low-magnitude high-frequency MECHVIB is more effective than PEMF on bone healing in terms of relative bone volume.</p

Komprimirani matriksni dvokomponentni sustavi s metoklopramid hidrokloridom

The purpose of the present investigation was to produce a quick/slow biphasic delivery system for metoclopramide hydrochloride using the superdisintegrant Ac-di-sol for the fast release layer and hydroxypropyl methylcellulose K100M and Ucarflock 302 to modulate the release of the drug. A dual component tablet made up of a sustained release and an immediate release layer was prepared by direct compression. A 32 full factorial design was applied to systematically optimize the drug release profile of the sustained release layer. The results of the full factorial design indicate that a small amount of HPMC K100M and a large amount of Ucarflock 302 favor sustained release of the metoclopramide hydrochloride vaginal dual component system. The ex vivo residence time reveals that the formulation was retained for more than 10 h. The formulation gave an initial burst effect to provide the loading dose of the drug followed by sustained release for 12 h, thus solving the problem of repeated administration, especially in pregnancy.Cilj rada bila je priprava brzog/sporog bifazičnog sustava za isporuku metoklopramid hidroklorida koristeći dezintegrator Ac-di-sol za sloj koji brzo oslobađa i hidroksipropil metilcelulozu K100M i Ucarflock 302 za moduliranje oslobađanja ljekovite tvari. Dvokomponentna tableta sa slojem za usporeno i slojem za brzo oslobađanje pripravljena je metodom izravne kompresije. 32 faktorijalni dizajn primijenjen je za sistematsko optimiranje profila oslobađanja ljekovite tvari u sloju za usporeno oslobađanje. Rezultati ukazuju na to da su mala količina HPMC K100M i velika količina Ucarflock 302 bitne za usporeno oslobađanje metoklopramid hidroklorida u dvokomponentnom sustavu za vaginalnu upotrebu. Ex vivo ispitivanja pokazuju da se pripravak zadržava više od 10 h. Naglo oslobađanje lijeka omogućava brzo postizanje udarne doze, a postupno oslobađanje tijekom 12 h održavanje učinkovite koncentracije, čime se rješava problem opetovane primjene, posebno u trudnoći

Bone Tissue Response to Porous and Functionalized Titanium and Silica Based Coatings

Background: Topography and presence of bio-mimetic coatings are known to improve osseointegration. The objective of this study was to evaluate the bone regeneration potential of porous and osteogenic coatings. Methodology: Six-implants [Control (CTR); porous titanium coatings (T1, T2); thickened titanium (Ti) dioxide layer (TiO2); Amorphous Microporous Silica (AMS) and Bio-active Glass (BAG)] were implanted randomly in tibiae of 20-New Zealand white rabbits. The animals were sacrificed after 2 or 4 weeks. The samples were analyzed histologically and histomorphometrically. In the initial bone-free areas (bone regeneration areas (BRAs)), the bone area fraction (BAF) was evaluated in the whole cavity (500 mm, BAF-500), in the implant vicinity (100 mm, BAF-100) and further away (100–500 mm, BAF-400) from the implant. Bone-to-implant contact (BIC-BAA) was measured in the areas where the implants were installed in contact to the host bone (bone adaptation areas (BAAs)) to understand and compare the bone adaptation. Mixed models were used for statistical analysis. Principal Findings: After 2 weeks, the differences in BAF-500 for different surfaces were not significant (p.0.05). After 4 weeks, a higher BAF-500 was observed for BAG than CTR. BAF-100 for AMS was higher than BAG and BAF-400 for BAG was higher than CTR and AMS. For T1 and AMS, the bone regeneration was faster in the 100-mm compared to the 400-mm zone. BIC-BAA for AMS and BAG was lower after 4 than 2 weeks. After 4 weeks, BIC-BAA for BAG was lower than AMS and CTR. Conclusions: BAG is highly osteogenic at a distance from the implant. The porous titanium coatings didn’t stimulate bone regeneration but allowed bone growth into the pores. Although AMS didn’t stimulate higher bone response, it has a potential of faster bone growth in the vicinity compared to further away from the surface. BIC-BAA data were inconclusive to understand the bone adaptation.status: publishe

Zebrafish as a model for kidney function and disease

Kidney disease is a global problem with around three million people diagnosed in the UK alone and the incidence is rising. Research is critical to develop better treatments. Animal models can help to better understand the pathophysiology behind the various kidney diseases and to screen for therapeutic compounds, but the use especially of mammalian models should be minimised in the interest of animal welfare. Zebrafish are increasingly used, as they are genetically tractable and have a basic renal anatomy comparable to mammalian kidneys with glomerular filtration and tubular filtration processing. Here, we discuss how zebrafish have advanced the study of nephrology and the mechanisms underlying kidney disease

Review of nanomaterials in dentistry: interactions with the oral microenvironment, clinical applications, hazards, and benefits.

Interest in the use of engineered nanomaterials (ENMs) as either nanomedicines or dental materials/devices in clinical dentistry is growing. This review aims to detail the ultrafine structure, chemical composition, and reactivity of dental tissues in the context of interactions with ENMs, including the saliva, pellicle layer, and oral biofilm; then describes the applications of ENMs in dentistry in context with beneficial clinical outcomes versus potential risks. The flow rate and quality of saliva are likely to influence the behavior of ENMs in the oral cavity, but how the protein corona formed on the ENMs will alter bioavailability, or interact with the structure and proteins of the pellicle layer, as well as microbes in the biofilm, remains unclear. The tooth enamel is a dense crystalline structure that is likely to act as a barrier to ENM penetration, but underlying dentinal tubules are not. Consequently, ENMs may be used to strengthen dentine or regenerate pulp tissue. ENMs have dental applications as antibacterials for infection control, as nanofillers to improve the mechanical and bioactive properties of restoration materials, and as novel coatings on dental implants. Dentifrices and some related personal care products are already available for oral health applications. Overall, the clinical benefits generally outweigh the hazards of using ENMs in the oral cavity, and the latter should not prevent the responsible innovation of nanotechnology in dentistry. However, the clinical safety regulations for dental materials have not been specifically updated for ENMs, and some guidance on occupational health for practitioners is also needed. Knowledge gaps for future research include the formation of protein corona in the oral cavity, ENM diffusion through clinically relevant biofilms, and mechanistic investigations on how ENMs strengthen the tooth structure

Community assessment to advance computational prediction of cancer drug combinations in a pharmacogenomic screen

The effectiveness of most cancer targeted therapies is short-lived. Tumors often develop resistance that might be overcome with drug combinations. However, the number of possible combinations is vast, necessitating data-driven approaches to find optimal patient-specific treatments. Here we report AstraZeneca’s large drug combination dataset, consisting of 11,576 experiments from 910 combinations across 85 molecularly characterized cancer cell lines, and results of a DREAM Challenge to evaluate computational strategies for predicting synergistic drug pairs and biomarkers. 160 teams participated to provide a comprehensive methodological development and benchmarking. Winning methods incorporate prior knowledge of drug-target interactions. Synergy is predicted with an accuracy matching biological replicates for >60% of combinations. However, 20% of drug combinations are poorly predicted by all methods. Genomic rationale for synergy predictions are identified, including ADAM17 inhibitor antagonism when combined with PIK3CB/D inhibition contrasting to synergy when combined with other PI3K-pathway inhibitors in PIK3CA mutant cells.Peer reviewe