Microbial oxidation of arsenite in a subarctic environment: diversity of arsenite oxidase genes and identification of a psychrotolerant arsenite oxidiser

Background: Arsenic is toxic to most living cells. The two soluble inorganic forms of arsenic are arsenite (+3) and arsenate (+5), with arsenite the more toxic. Prokaryotic metabolism of arsenic has been reported in both thermal and moderate environments and has been shown to be involved in the redox cycling of arsenic. No arsenic metabolism (either dissimilatory arsenate reduction or arsenite oxidation) has ever been reported in cold environments (i.e. < 10°C). Results: Our study site is located 512 kilometres south of the Arctic Circle in the Northwest Territories, Canada in an inactive gold mine which contains mine waste water in excess of 50 mM arsenic. Several thousand tonnes of arsenic trioxide dust are stored in underground chambers and microbial biofilms grow on the chamber walls below seepage points rich in arsenite-containing solutions. We compared the arsenite oxidisers in two subsamples (which differed in arsenite concentration) collected from one biofilm. 'Species' (sequence) richness did not differ between subsamples, but the relative importance of the three identifiable clades did. An arsenite-oxidising bacterium (designated GM1) was isolated, and was shown to oxidise arsenite in the early exponential growth phase and to grow at a broad range of temperatures (4-25°C). Its arsenite oxidase was constitutively expressed and functioned over a broad temperature range. Conclusions: The diversity of arsenite oxidisers does not significantly differ from two subsamples of a microbial biofilm that vary in arsenite concentrations. GM1 is the first psychrotolerant arsenite oxidiser to be isolated with the ability to grow below 10°C. This ability to grow at low temperatures could be harnessed for arsenic bioremediation in moderate to cold climates

A surface potential study of ion-uptake by 5,11,17,23-tetra-tert-butyl-25,27-diethoxycarbonyl methyleneoxy-26,28,dihydroxycalix[4]arene and 5,17-(3-nitrobenzylideneamino)-11,23-di-tert-butyl-25,27- diethoxycarbonyl methyleneoxy-26,28-dihydroxycalix[4]arene Langmuir Blodgett (LB) monolayers

A study of surface pressure - area (Π-A) isotherms, surface potential (ΔV) and effective dipole moment () of two calix[4] arenes, 5,11,17,23-tetra-tert-butyl-25,27-diethoxycarbonyl methyleneoxy-26,28,dihydroxycalix[4]arene (calixarene I) and 5,17-(3-nitrobenzylideneamino)-11,23-di-tert-butyl-25,27-diethoxycarbonyl methyleneoxy-26,28-dihydroxycalix[4] arene (calixarene II) LB films which have the same lower rim but different upper rim has been carried out. This work used a NIMA Surface Potential (S-POT) sensor attached to an LB trough. Space filling model or Corey, Pauling and Koltun (CPK) precision molecular models have been used to estimate the size and the flexibility of both calix[4]arenes, which has been confirmed by X-Ray analysis in one case. The Π-A-isotherms confirmed that both of the calix[4]arenes form a monolayer film and the orientations of the plane of the calix ring are parallel with the air-water interface. The value of limiting area, (Alim) increases as a result of adding Fe3+ salt in the water subphase. For I, the value increases from 1.28 nm2 to 1.44 nm2 while for II, it increases from 1.70 nm2 to 1.86 nm2. ΔV measurements were performed on a water subphase containing Fe3+ salt in the concentration range 0 – 1.25 10–1 mM. ΔV of the compressed monolayer films increased with increasing Fe3+ concentration indicating the presence of Fe3+ salt bound within the calix[4]arenes. Using the ΔV values, the effective dipole moment has been found using the Helmholtz equation

Excitation Function Measurements of Proton Induced Reactions on Rhodium and Indium: Yields of 97-Ru, 96-Tc, 109-Cd, and 113-Sn

Supported by the National Science Foundation and Indiana Universit

Excitation Function Measurements of Proton Induced Reactions on Rhodium and Indium: Yields of Ru-97, Tc-96, Cd-109, and Sn-113

This work was supported by National Science Foundation Grants PHY 76-84033A01, PHY 78-22774, and Indiana Universit

Yield conditions for deformation of amorphous polymer glasses

Shear yielding of glassy polymers is usually described in terms of the pressure-dependent Tresca or von Mises yield criteria. We test these criteria against molecular dynamics simulations of deformation in amorphous polymer glasses under triaxial loading conditions that are difficult to realize in experiments. Difficulties and ambiguities in extending several standard definitions of the yield point to triaxial loads are described. Two definitions, the maximum and offset octahedral stresses, are then used to evaluate the yield stress for a wide range of model parameters. In all cases, the onset of shear is consistent with the pressure-modified von Mises criterion, and the pressure coefficient is nearly independent of many parameters. Under triaxial tensile loading, the mode of failure changes to cavitation.Comment: 9 pages, 8 figures, revte

Tobacco use and psychosis risk in persons at clinical high risk

Aim: To evaluate the role of tobacco use in the development of psychosis in individuals at clinical high risk. Method: The North American Prodrome Longitudinal Study is a 2-year multi-site prospective case control study of persons at clinical high risk that aims to better understand predictors and mechanisms for the development of psychosis. The cohort consisted of 764 clinical high risk and 279 healthy comparison subjects. Clinical assessments included tobacco and substance use and several risk factors associated with smoking in general population studies. Results: Clinical high risk subjects were more likely to smoke cigarettes than unaffected subjects (light smoking odds ratio [OR] = 3.0, 95% confidence interval [CI] = 1.9-5; heavy smoking OR = 4.8, 95% CI = 1.7-13.7). In both groups, smoking was associated with mood, substance use, stress and perceived discrimination and in clinical high risk subjects with childhood emotional neglect and adaption to school. Clinical high risk subjects reported higher rates of several factors previously associated with smoking, including substance use, anxiety, trauma and perceived discrimination. After controlling for these potential factors, the relationship between clinical high risk state and smoking was no longer significant (light smoking OR = 0.9, 95% CI = 0.4-2.2; heavy smoking OR = 0.3, 95% CI = 0.05-2.3). Moreover, baseline smoking status (hazard ratio [HR] = 1.16, 95% CI = 0.82-1.65) and categorization as ever smoked (HR = 1.3, 95% CI = 0.8-2.1) did not predict time to conversion. Conclusion: Persons at high risk for psychosis are more likely to smoke and have more factors associated with smoking than controls. Smoking status in clinical high risk subjects does not predict conversion. These findings do not support a causal relationship between smoking and psychosis

The Challenges of Creativity in Software Organizations

Part 1: Creating ValueInternational audienceManaging creativity has proven to be one of the most important drivers in software development and use. The continuous changing market environment drives companies like Google, SAS Institute and LEGO to focus on creativity as an increasing necessity when competing through sustained innovations. However, creativity in the information systems (IS) environment is a challenge for most organizations that is primarily caused by not knowing how to strategize creative processes in relation to IS strategies, thus, causing companies to act ad hoc in their creative endeavors. In this paper, we address the organizational challenges of creativity in software organizations. Grounded in a previous literature review and a rigorous selection process, we identify and present a model of seven important factors for creativity in software organizations. From these factors, we identify 21 challenges that software organizations experience when embarking on creative endeavors and transfer them into a comprehensive framework. Using an interpretive research study, we further study the framework by analyzing how the challenges are integrated in 27 software organizations. Practitioners can use this study to gain a deeper understanding of creativity in their own business while researchers can use the framework to gain insight while conducting interpretive field studies of managing creativity

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011

Measurements of Higgs boson production and couplings in diboson final states with the ATLAS detector at the LHC

Measurements are presented of production properties and couplings of the recently discovered Higgs boson using the decays into boson pairs, H →γ γ, H → Z Z∗ →4l and H →W W∗ →lνlν. The results are based on the complete pp collision data sample recorded by the ATLAS experiment at the CERN Large Hadron Collider at centre-of-mass energies of √s = 7 TeV and √s = 8 TeV, corresponding to an integrated luminosity of about 25 fb−1. Evidence for Higgs boson production through vector-boson fusion is reported. Results of combined fits probing Higgs boson couplings to fermions and bosons, as well as anomalous contributions to loop-induced production and decay modes, are presented. All measurements are consistent with expectations for the Standard Model Higgs boson