Control of Neural Stem Cell Survival by Electroactive Polymer Substrates

Stem cell function is regulated by intrinsic as well as microenvironmental factors, including chemical and mechanical signals. Conducting polymer-based cell culture substrates provide a powerful tool to control both chemical and physical stimuli sensed by stem cells. Here we show that polypyrrole (PPy), a commonly used conducting polymer, can be tailored to modulate survival and maintenance of rat fetal neural stem cells (NSCs). NSCs cultured on PPy substrates containing different counter ions, dodecylbenzenesulfonate (DBS), tosylate (TsO), perchlorate (ClO4) and chloride (Cl), showed a distinct correlation between PPy counter ion and cell viability. Specifically, NSC viability was high on PPy(DBS) but low on PPy containing TsO, ClO4 and Cl. On PPy(DBS), NSC proliferation and differentiation was comparable to standard NSC culture on tissue culture polystyrene. Electrical reduction of PPy(DBS) created a switch for neural stem cell viability, with widespread cell death upon polymer reduction. Coating the PPy(DBS) films with a gel layer composed of a basement membrane matrix efficiently prevented loss of cell viability upon polymer reduction. Here we have defined conditions for the biocompatibility of PPy substrates with NSC culture, critical for the development of devices based on conducting polymers interfacing with NSCs

Review: The increasing importance of carbon nanotubes and nanostructured conducting polymers in biosensors

The growing need for analytical devices requiring smaller sample volumes, decreased power consumption and improved performance have been driving forces behind the rapid growth in nanomaterials research. Due to their dimensions, nanostructured materials display unique properties not traditionally observed in bulk materials. Characteristics such as increased surface area along with enhanced electrical/optical properties make them suitable for numerous applications such as nanoelectronics, photovoltaics and chemical/biological sensing. In this review we examine the potential that exists to use nanostructured materials for biosensor devices. By incorporating nanomaterials, it is possible to achieve enhanced sensitivity, improved response time and smaller size. Here we report some of the success that has been achieved in this area. Many nanoparticle and nanofibre geometries are particularly relevant, but in this paper we specifically focus on organic nanostructures, reviewing conducting polymer nanostructures and carbon nanotubes

Prospects of Nanotechnology in Clinical Immunodiagnostics

Nanostructured materials are promising compounds that offer new opportunities as sensing platforms for the detection of biomolecules. Having micrometer-scale length and nanometer-scale diameters, nanomaterials can be manipulated with current nanofabrication methods, as well as self-assembly techniques, to fabricate nanoscale bio-sensing devices. Nanostructured materials possess extraordinary physical, mechanical, electrical, thermal and multifunctional properties. Such unique properties advocate their use as biomimetic membranes to immobilize and modify biomolecules on the surface of nanoparticles. Alignment, uniform dispersion, selective growth and diameter control are general parameters which play critical roles in the successful integration of nanostructures for the fabrication of bioelectronic sensing devices. In this review, we focus on different types and aspects of nanomaterials, including their synthesis, properties, conjugation with biomolecules and their application in the construction of immunosensing devices. Some key results from each cited article are summarized by relating the concept and mechanism behind each sensor, experimental conditions and the behavior of the sensor under different conditions, etc. The variety of nanomaterial-based bioelectronic devices exhibiting novel functions proves the unique properties of nanomaterials in such sensing devices, which will surely continue to expand in the future. Such nanomaterial based devices are expected to have a major impact in clinical immunodiagnostics, environmental monitoring, security surveillance and for ensuring food safety

Electrochemical detection of lead using overoxidized polypyrrole films

An electrochemical method for the determination of lead has been developed using overoxidized polypyrrole (OPPy) electrode doped with 2(2-pyridylazo)chromotropic acid anion (PACh2−). The PACh2− acts both as a chelating agent and a counter anion within the polypyrrole matrix. In a typical assay, Pb2+ is accumulated on a solid electrode via the formation of a lead–PACh complex at open circuit. The electrode containing the Pb2+PACh2− is then transferred to a 0.1 M acetate buffer where it is subjected to differential pulse anodic stripping voltammetry. The resulting stripping peak current was linearly related to the concentration of lead. The method has been optimized with respect to pH, concentration of chelating agent, accumulation time, reduction potential and time. The detection limit was found to be 10 ng ml−1 with a linear range of 0–200 ng ml−1. The method has been validated for the determination of lead using spiked potable water at 25 ng ml−1. The average recovery was 93.4% with a relative standard deviation of 8.54%

Chemical Biological Sensors Based on Advances in Conducting Electroactive Polymers

Advances in conducting electroactive polymers (CEPs) have driven the design of novel chemical and biochemical sensors. The redox properties of CEPs have been intensely studied for more than two decades with emphasis on their synthesis and characterization. Little attention has been paid to the importance of mechanism in sensor designs. However, in order to design robust and stable sensors, it is important to understand how the polymer structure, morphology, adhesion properties and microenvironment affect sensor performance. This work describes how chemical and biological sensors have been designed, fabricated, characterized and tested based on the fundamental understanding in CEPs. The use of photopolymerized conducting polymers in sensor designs is described. Four focus areas are presented in which the electronic properties of CEPs have enabled the design of novel sensors for organics, nucleic acids, biological molecules, vapors and metal ions

Pressure Assisted Chelating Extraction: A New Technique for Digesting Metals in Solid Matrices

This work describes a novel technique for the digestion of metals in solid matrices. The technique is called pressure assisted chelating extraction (PACE). In a typical procedure, a solid sample is placed in a stainless steel cell and is mixed with appropriate chelating agents. Using a programmed sequence of temperature, static time, pressure and thermal equilibration available in ASE 200TM, the metal is removed under moderate temperature (up to 200 °C) and pressure (up to 3000 psi). PACE achieves metal recovery that is equivalent to that of wet digestion techniques and also provides for a clean and safe operation by substituting the strong acids commonly used during wet digestion with chelating agents. It uses less solvents and significantly less time (minutes vs. hours) for metal digestion. PACE has been validated using certified standard reference materials (SRMs) including industrial sludge, buffalo river sediments and coal fly ash. The total time required to remove metals was ∼20 min. Results show that the PACE system provides an ideal platform for efficient, rapid, and safe metal digestion. Good agreement between measured and reference values for Pb, Mn, and Cu were found with recoveries averaging between 80 and 101% and a relative standard deviation of less than 5%. This approach may provide an alternative digestion technique for environmental samples, alloys, biological materials and samples of geological importance. The potential advantage offered lies in non-destruction of the sample, automation and the exclusion of concentrated mineral acids during the digestion procedure

Multicomponent analysis of alcohol vapors using integrated gas chromatography with sensor arrays

We have fabricated and tested a multiarray polymer sensor by integrating the sensor array with a gas chromatograph. We compared the performance of the system with a contemporary thermoconductivity detector for the identification and detection of different volatile organic compounds (VOCs). These sensor arrays were not only able to detect the different compounds but also demonstrated a very wide linear response to the amounts of VOC exposure. The performance of the gas chromatograph-polymer sensor array detector (GC–PSAD) was very good and comparable to the gas chromatograph thermal conductivity detector (GC–TCD) system in terms of linearity and reproducibility. The repeatability of peak heights and areas was consistent over several months. The PSAD chip is easily fabricated and that process including the polymer deposition is described in detail. Our experimental results suggest that the GC–PSAD system is effective in the analysis of mixtures and this is a distinct advantage over the contemporary electronic nose sensor array systems

Nanostructured Polyamic Acid Membranes as Novel Electrode Materials

This paper describes a new approach for the preparation of polyamic acid (PAA) composites containing Ag and Au nanoparticles. The composite film of PAA and metal particles were obtained upon electrodeposition of a PAA solution containing gold or silver salts with subsequent thermal treatment, while imidization to polyimide is prevented. The structural characterization of the films is provided by 1H NMR and Fourier transform infrared spectroscopy (FTIR), while the presence of metallic nanoparticles within the polymeric matrix was confirmed by scanning electron microscopy (SEM), cyclic voltammetry (CV), energy-dispersive X-ray analysis (EDX), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). This approach utilizes the unique reactivity of PAA by preventing the cyclization of the reactive soluble intermediate into polyimides at low temperature to design polymer-assisted nanostructured materials. The ability to prevent the cyclization process should enable the design of a new class of electrode materials by use of thermal reduction and/or electrodeposition