1,529 research outputs found
Weldability of micro-alloyed high-strength pipeline steels using a new friction welding variant
An innovative welding method for fully automatic joining of pipelines has been developed. The proposed welding procedure is a variant of the conventional friction welding process. A rotating intermediate ring is used to generate heat necessary to realise the weld. The working principles of the welding process are described. The weldability of the micro-alloyed high-strength pipeline steel API-5L X65 is experimentally investigated. It was found that the new welding process is suitable for joining this material. When welding with a sufficiently low heat input, a high weld quality is obtained. Under these circumstances the weld strength, ductility and impact toughness are high and fulfil the requirements of the commonly used standard EN 12732 for joining pipes
The data acquisition system of the CHORUS experiment
In the years 1994-1998 the CHORUS Collaboration has recorded data in the CERN WA95 experiment. Here we describe the data acquisition system that has been used, featuring concurrent hierarchical state machines, a remote operating system, a buffer manager, a dispatcher, a control panel and a supervisor
The data acquisition system of the CHORUS experiment
In the years 1994--1998 the CHORUS Collaboration has recorded data in the CERN WA95 experiment. Here we describe the data acquisition system that has been used, featuring concurrent hierarchical state machines, a remote operating system, a buffer manager, a dispatcher, a control panel and a supervisor
The Time Structure of Hadronic Showers in highly granular Calorimeters with Tungsten and Steel Absorbers
The intrinsic time structure of hadronic showers influences the timing
capability and the required integration time of hadronic calorimeters in
particle physics experiments, and depends on the active medium and on the
absorber of the calorimeter. With the CALICE T3B experiment, a setup of 15
small plastic scintillator tiles read out with Silicon Photomultipliers, the
time structure of showers is measured on a statistical basis with high spatial
and temporal resolution in sampling calorimeters with tungsten and steel
absorbers. The results are compared to GEANT4 (version 9.4 patch 03)
simulations with different hadronic physics models. These comparisons
demonstrate the importance of using high precision treatment of low-energy
neutrons for tungsten absorbers, while an overall good agreement between data
and simulations for all considered models is observed for steel.Comment: 24 pages including author list, 9 figures, published in JINS
Performance of the first prototype of the CALICE scintillator strip electromagnetic calorimeter
A first prototype of a scintillator strip-based electromagnetic calorimeter
was built, consisting of 26 layers of tungsten absorber plates interleaved with
planes of 45x10x3 mm3 plastic scintillator strips. Data were collected using a
positron test beam at DESY with momenta between 1 and 6 GeV/c. The prototype's
performance is presented in terms of the linearity and resolution of the energy
measurement. These results represent an important milestone in the development
of highly granular calorimeters using scintillator strip technology. This
technology is being developed for a future linear collider experiment, aiming
at the precise measurement of jet energies using particle flow techniques
Performance and calibration of the CHORUS scintillating fiber tracker and opto-electronics readout system
An essential component of the CERN WA95/CHORUS experiment is a scintillating fiber tracker system for precise track reconstruction of particles. The tracker design, its opto-electronics readout and calibration system are discussed. Performances of the detector are presented
Performance of the CMS Cathode Strip Chambers with Cosmic Rays
The Cathode Strip Chambers (CSCs) constitute the primary muon tracking device
in the CMS endcaps. Their performance has been evaluated using data taken
during a cosmic ray run in fall 2008. Measured noise levels are low, with the
number of noisy channels well below 1%. Coordinate resolution was measured for
all types of chambers, and fall in the range 47 microns to 243 microns. The
efficiencies for local charged track triggers, for hit and for segments
reconstruction were measured, and are above 99%. The timing resolution per
layer is approximately 5 ns
Observation of weak neutral current neutrino production of
Observation of \jpsi production by neutrinos in the calorimeter of the CHORUS detector exposed to the CERN SPS wide-band \numu beam is reported. A spectrum-averaged cross-section = (6.3 3.0) is obtained for 20 GeV 200 GeV. The data are compared with the theoretical model based on the QCD Z-gluon fusion mechanism
Prospects for Diffractive and Forward Physics at the LHC
The CMS and TOTEM experiments intend to carry out a joint diffractive/forward physics program with an unprecedented rapidity coverage. The present document outlines some aspects of such a physics program, which spans from the investigation of the low-x structure of the proton to the diffractive production of a SM or MSSM Higgs boson
The CHORUS neutrino oscillation search experiment
The CHORUS experiment has successfully finished run I (320~000 recorded \numu\ CC in 94/95) and performed half of run II (225~000 \numu\ CC in 96). The analysis chain was exercised on a small data sample for the muonic \tdecay\ search using for the first time fully automatic emulsion scanning. This pilot analysis, resulting in a limit \sintth \leq 3 \cdot 10^{-2}, confirms that the CHORUS proposal sensitivity (\sintth \leq 3 \cdot 10^{-4}) is within reach in two years
- …