Tetrasubstituted copper phthalocyanines : correlation between liquid crystalline properties, films alignment and sensing propertie

Copper phthalocyanines (CuPc) containing alkylthio (-S(CH2)nCH3, n=7 and 15), alkyloxy- (-O(CH2)nCH3, n=7 and 15) and polyoxo (-O(CH2CH2O)3CH3 and -S(CH2CH2O)3CH3) substituents were synthesized and investigated to reveal the effects of substituents type (alkylthio, alkyloxy and polyoxo) and the type of the connecting heteroatom (oxygen or sulphur) on the mesogenic properties, films alignment and sensing behaviour. The liquid crystalline properties of these phthalocyanines were investigated by differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction techniques. The structure and morphology of spun thin films of copper phthalocyanine derivatives were studied by the UV-Vis and Raman spectroscopies as well atomic force microscopy. The sensing properties of CuPc films were studied by the measurement of conductivity change upon interaction with ammonia in the range 10-50 ppm. All investigated films of CuPc derivatives display thermotropic columnar mesomorphism. It was shown that the films with polyoxo- (-O(CH2CH2O)3CH3 and -S(CH2CH2O)3CH3) substituents as well as with alkylthio -S(CH2)nCH3 (n=7) substituents, which are liquid crystalline at room temperature, form ordered films with a random planar alignment of columns. Their films exhibit the better sensor performance with the maximal sensor response for the films of CuPc containing (-S(CH2CH2O)3CH3) substituents

Entanglement of a Single Spin-1 Object: An Example of Ubiquitous Entanglement

Using a single spin-1 object as an example, we discuss a recent approach to quantum entanglement. The key idea of the approach consists in presetting of basic observables in the very definition of quantum system. Specification of basic observables defines the dynamic symmetry of the system. Entangled states of the system are then interpreted as states with maximal amount of uncertainty of all basic observables. The approach gives purely physical picture of entanglement. In particular, it separates principle physical properties of entanglement from inessential. Within the model example under consideration, we show relativity of entanglement with respect to dynamic symmetry and argue existence of single-particle entanglement. A number of physical examples are considered.Comment: 12 pages, 2 figure : title has been changed, paper is re-organized, new section "Violation of Bell-type condition by single spin-1" is adde

Web-based monitoring tools for Resistive Plate Chambers in the CMS experiment at CERN

The Resistive Plate Chambers (RPC) are used in the CMS experiment at the trigger level and also in the standard offline muon reconstruction. In order to guarantee the quality of the data collected and to monitor online the detector performance, a set of tools has been developed in CMS which is heavily used in the RPC system. The Web-based monitoring (WBM) is a set of java servlets that allows users to check the performance of the hardware during data taking, providing distributions and history plots of all the parameters. The functionalities of the RPC WBM monitoring tools are presented along with studies of the detector performance as a function of growing luminosity and environmental conditions that are tracked over time

Radiation background with the CMS RPCs at the LHC

The Resistive Plate Chambers (RPCs) are employed in the CMS Experiment at the LHC as dedicated trigger system both in the barrel and in the endcap. This article presents results of the radiation background measurements performed with the 2011 and 2012 proton-proton collision data collected by CMS. Emphasis is given to the measurements of the background distribution inside the RPCs. The expected background rates during the future running of the LHC are estimated both from extrapolated measurements and from simulation

Quality control and beam test of GEM detectors for future upgrades of the CMS muon high rate region at the LHC

Gas Electron Multipliers (GEM) are a proven position sensitive gas detector technology which nowadays is becoming more widely used in High Energy Physics. GEMs offer an excellent spatial resolution and a high particle rate capability, with a close to 100% detection efficiency. In view of the high luminosity phase of the CERN Large Hadron Collider, these aforementioned features make GEMs suitable candidates for the future upgrades of the Compact Muon Solenoid (CMS) detector. In particular, the CMS GEM Collaboration proposes to cover the high-eta region of the muon system with large-area triple-GEM detectors, which have the ability to provide robust and redundant tracking and triggering functions. In this contribution, after a general introduction and overview of the project, the construction of full-size trapezoidal triple-GEM prototypes will be described in more detail. The procedures for the quality control of the GEM foils, including gain uniformity measurements with an x-ray source will be presented. In the past few years, several CMS triple-GEM prototype detectors were operated with test beams at the CERN SPS. The results of these test beam campaigns will be summarised

Antimicrobial resistance among migrants in Europe: a systematic review and meta-analysis

BACKGROUND: Rates of antimicrobial resistance (AMR) are rising globally and there is concern that increased migration is contributing to the burden of antibiotic resistance in Europe. However, the effect of migration on the burden of AMR in Europe has not yet been comprehensively examined. Therefore, we did a systematic review and meta-analysis to identify and synthesise data for AMR carriage or infection in migrants to Europe to examine differences in patterns of AMR across migrant groups and in different settings. METHODS: For this systematic review and meta-analysis, we searched MEDLINE, Embase, PubMed, and Scopus with no language restrictions from Jan 1, 2000, to Jan 18, 2017, for primary data from observational studies reporting antibacterial resistance in common bacterial pathogens among migrants to 21 European Union-15 and European Economic Area countries. To be eligible for inclusion, studies had to report data on carriage or infection with laboratory-confirmed antibiotic-resistant organisms in migrant populations. We extracted data from eligible studies and assessed quality using piloted, standardised forms. We did not examine drug resistance in tuberculosis and excluded articles solely reporting on this parameter. We also excluded articles in which migrant status was determined by ethnicity, country of birth of participants' parents, or was not defined, and articles in which data were not disaggregated by migrant status. Outcomes were carriage of or infection with antibiotic-resistant organisms. We used random-effects models to calculate the pooled prevalence of each outcome. The study protocol is registered with PROSPERO, number CRD42016043681. FINDINGS: We identified 2274 articles, of which 23 observational studies reporting on antibiotic resistance in 2319 migrants were included. The pooled prevalence of any AMR carriage or AMR infection in migrants was 25·4% (95% CI 19·1-31·8; I2 =98%), including meticillin-resistant Staphylococcus aureus (7·8%, 4·8-10·7; I2 =92%) and antibiotic-resistant Gram-negative bacteria (27·2%, 17·6-36·8; I2 =94%). The pooled prevalence of any AMR carriage or infection was higher in refugees and asylum seekers (33·0%, 18·3-47·6; I2 =98%) than in other migrant groups (6·6%, 1·8-11·3; I2 =92%). The pooled prevalence of antibiotic-resistant organisms was slightly higher in high-migrant community settings (33·1%, 11·1-55·1; I2 =96%) than in migrants in hospitals (24·3%, 16·1-32·6; I2 =98%). We did not find evidence of high rates of transmission of AMR from migrant to host populations. INTERPRETATION: Migrants are exposed to conditions favouring the emergence of drug resistance during transit and in host countries in Europe. Increased antibiotic resistance among refugees and asylum seekers and in high-migrant community settings (such as refugee camps and detention facilities) highlights the need for improved living conditions, access to health care, and initiatives to facilitate detection of and appropriate high-quality treatment for antibiotic-resistant infections during transit and in host countries. Protocols for the prevention and control of infection and for antibiotic surveillance need to be integrated in all aspects of health care, which should be accessible for all migrant groups, and should target determinants of AMR before, during, and after migration. FUNDING: UK National Institute for Health Research Imperial Biomedical Research Centre, Imperial College Healthcare Charity, the Wellcome Trust, and UK National Institute for Health Research Health Protection Research Unit in Healthcare-associated Infections and Antimictobial Resistance at Imperial College London

CMS RPC muon detector performance with 2010-2012 LHC data

The muon spectrometer of the CMS (Compact Muon Solenoid) experiment at the Large Hadron Collider (LHC) is equipped with a redundant system made of Resistive Plate Chambers (RPCs) and Drift Tube (DT) chambers in the barrel, RPC and Cathode Strip Chambers (CSCs) in the endcap region. In this paper, the operations and the performance of the RPC system during the first three years of LHC activity are presented. The stability of the RPC performance, in terms of efficiency, cluster size and noise, is also reported. Finally, the radiation background levels on the RPC system have been measured as a function of the LHC luminosity. Extrapolations to the High Luminosity LHC conditions are also discussed

Validation of the Short Version (TLS-15) of the Triangular Love Scale (TLS-45) Across 37 Languages

Love is a phenomenon that occurs across the world and affects many aspects of human life, including the choice of, and process of bonding with, a romantic partner. Thus, developing a reliable and valid measure of love experiences is crucial. One of the most popular tools to quantify love is Sternberg’s 45-item Triangular Love Scale (TLS-45), which measures three love components: intimacy, passion, and commitment. However, our literature review reveals that most studies (64%) use a broad variety of shortened versions of the TLS-45. Here, aiming to achieve scientific consensus and improve the reliability, comparability, and generalizability of results across studies, we developed a short version of the scale—the TLS-15—comprised of 15 items with 5-point, rather than 9-point, response scales. In Study 1 (N = 7,332), we re-analyzed secondary data from a large-scale multinational study that validated the original TLS-45 to establish whether the scale could be truncated. In Study 2 (N = 307), we provided evidence for the three-factor structure of the TLS-15 and its reliability. Study 3 (N = 413) confirmed convergent validity and test–retest stability of the TLS-15. Study 4 (N = 60,311) presented a large-scale validation across 37 linguistic versions of the TLS-15 on a cross-cultural sample spanning every continent of the globe. The overall results provide support for the reliability, validity, and cross-cultural invariance of the TLS-15, which can be used as a measure of love components—either separately or jointly as a three-factor measure

Quality control and beam test of GEM detectors for future upgrades of the CMS muon high rate region at the LHC

Gas Electron Multipliers (GEM) are a proven position sensitive gas detector technology which nowadays is becoming more widely used in High Energy Physics. GEMs offer an excellent spatial resolution and a high particle rate capability, with a close to 100% detection efficiency. In view of the high luminosity phase of the CERN Large Hadron Collider, these aforementioned features make GEMs suitable candidates for the future upgrades of the Compact Muon Solenoid (CMS) detector. In particular, the CMS GEM Collaboration proposes to cover the high-eta region of the muon system with large-area triple-GEM detectors, which have the ability to provide robust and redundant tracking and triggering functions. In this contribution, after a general introduction and overview of the project, the construction of full-size trapezoidal triple-GEM prototypes will be described in more detail. The procedures for the quality control of the GEM foils, including gain uniformity measurements with an x-ray source will be presented. In the past few years, several CMS triple-GEM prototype detectors were operated with test beams at the CERN SPS. The results of these test beam campaigns will be summarised