97 research outputs found
Analysis of the iron coatings formed during marcasite and arsenopyrite oxidation at neutral-alkaline conditions
In order to study the nature of the precipitates formed on arsenopyrite and marcasite after reacting with neutral to alkaline solutions, a combination of techniques including Scanning Electron Microscope-Energy Dispersive Spectroscopy (SEM-EDS), X-ray Photoelectron Spectroscopy (XPS) and synchrotron-based techniques such as micro-X-Ray diffraction (µXRD) and Micro-X-ray Absorption Near Edge Structure (µXANES) have been used. The results showed that the oxidation of marcasite and arsenopyrite under neutral to alkaline conditions leads to the formation of an Fe rich coating which seems to prevent the oxidation of these sulphides. SEM observations confirmed the presence newly-formed phases after the sulphides reaction under the studied conditions. XPS analysis showed that iron, sulphur and arsenic in the case of the arsenopyrite are in oxidized states in the sulphide surfaces. The microscale analysis of the S and Fe speciation performed by µXANES suggested that due to the sulphide oxidation an increase in the oxidation state of those elements took place together with an increase of the sulphate content in the surface layer (grain boundary). Micro-X-ray diffraction results indicated that goethite (a-FeOOH) is the only crystalline newly-formed phase when the reaction occurs at pH 12 whereas at lower pH the products formed on the sulphide surfaces seem to be poorly crystalline and they do not contribute to the diffraction effects in the XRD diagrams
Validity of a low-cost friction encoder for measuring velocity, force and power in flywheel exercise devices
The purpose of this study was to investigate the validity of a low-cost friction encoder against a criterion measure (strain gauge combined with a linear encoder) for assessing velocity, force and power in flywheel exercise devices. Ten young and physically active volunteers performed two sets of 14 maximal squats on a flywheel inertial device (YoYo Technology, Stockholm, Sweden) with five minutes rest between each set. Two different resistances were used (0.075 kg · m2 for the first set; 0.025 kg · m2 for the second). Mean velocity (Vrep), force (Frep) and power (Prep) for each repetition were assessed simultaneously via a friction encoder (Chronojump, Barcelona, Spain), and with a strain gauge combined with a linear encoder (MuscleLab 6000, Ergotest Technology, Porsgrunn, Norway). Results are displayed as (Mean [CI 90%]). Compared to criterion measures, mean bias for the practical measures of Vrep, Frep and Prep were moderate (-0.95 [-0.99 to -0.92]), small (0.53 [0.50 to 0.56]) and moderate (-0.68 [-0.71 to -0.65]) respectively. The typical error of estimate (TEE) was small for all three parameters; Vrep (0.23 [0.20 to 0.25]), Frep (0.20 [0.18 to 0.22]) and Prep (0.18 [0.16 to 0.20]). Correlations with MuscleLab were nearly perfect for all measures in all load configurations. Based on these findings, the friction encoder provides valid measures of velocity, force and power in flywheel exercise devices. However, as error did exist between measures, the same testing protocol should be used when assessing changes in these parameters over time, or when aiming to perform inter-individual comparisons
Baseline and stress-induced levels of corticosterone in male and female Afrotropical and European temperate stonechats during breeding
Recommended from our members
The regulation of monoamine oxidase: a gene expression by distinct variable number tandem repeats
The monoamine oxidase A (MAOA) uVNTR (upstream variable number tandem repeat) is one of the most often cited examples of a gene by environment interaction (GxE) in relation to behavioral traits. However, MAOA possesses a second VNTR, 500 bp upstream of the uVNTR, which is termed d- or distal VNTR. Furthermore, genomic analysis indicates that there are a minimum of two transcriptional start sites (TSSs) for MAOA, one of which encompasses the uVNTR within the 5′ untranslated region of one of the isoforms. Through expression analysis in semi-haploid HAP1 cell lines genetically engineered in order to knockout (KO) either the uVNTR, dVNTR, or both VNTRs, we assessed the effect of the two MAOA VNTRs, either alone or in combination, on gene expression directed from the different TSSs. Complementing our functional analysis, we determined the haplotype variation of these VNTRs in the general population. The expression of the two MAOA isoforms was differentially modulated by the two VNTRs located in the promoter region. The most extensively studied uVNTR, previously considered a positive regulator of the MAOA gene, did not modulate the expression of what it is considered the canonical isoform, while we found that the dVNTR positively regulated this isoform in our model. In contrast, both the uVNTR and the dVNTR were found to act as negative regulators of the second less abundant MAOA isoform. The haplotype analysis for these two VNTRs demonstrated a bias against the presence of one of the potential variants. The uVNTR and dVNTR differentially affect expression of distinct MAOA isoforms, and thus, their combined profiling offers new insights into gene-regulation, GxE interaction, and ultimately MAOA-driven behavior
Siesta: Recent developments and applications
A review of the present status, recent enhancements, and applicability of the Siesta program is presented. Since its debut in the mid-1990s, Siesta?s flexibility, efficiency, and free distribution have given advanced materials simulation capabilities to many groups worldwide. The core methodological scheme of Siesta combines finite-support pseudo-atomic orbitals as basis sets, norm-conserving pseudopotentials, and a real-space grid for the representation of charge density and potentials and the computation of their associated matrix elements. Here, we describe the more recent implementations on top of that core scheme, which include full spin?orbit interaction, non-repeated and multiple-contact ballistic electron transport, density functional theory (DFT)+U and hybrid functionals, time-dependent DFT, novel reduced-scaling solvers, density-functional perturbation theory, efficient van der Waals non-local density functionals, and enhanced molecular-dynamics options. In addition, a substantial effort has been made in enhancing interoperability and interfacing with other codes and utilities, such as wannier90 and the second-principles modeling it can be used for, an AiiDA plugin for workflow automatization, interface to Lua for steering Siesta runs, and various post-processing utilities. Siesta has also been engaged in the Electronic Structure Library effort from its inception, which has allowed the sharing of various low-level libraries, as well as data standards and support for them, particularly the PSeudopotential Markup Language definition and library for transferable pseudopotentials, and the interface to the ELectronic Structure Infrastructure library of solvers. Code sharing is made easier by the new open-source licensing model of the program. This review also presents examples of application of the capabilities of the code, as well as a view of on-going and future developments.SIESTA development was historically supported by different Spanish National Plan projects (Project Nos. MEC-DGES-PB95-0202, MCyT-BFM2000-1312, MEC-BFM2003-03372, FIS2006-12117, FIS2009-12721, FIS2012-37549, FIS2015-64886-P, and RTC-2016-5681-7), the latter one together with Simune Atomistics Ltd. We are thankful for financial support from the Spanish Ministry of Science, Innovation and Universities through Grant No. PGC2018-096955-
Human Fallopian tube epithelium constitutively expresses integrin endometrial receptivity markers:no evidence for a tubal implantation window
Involvement of microRNA Lethal-7a in the Regulation of Embryo Implantation in Mice
MicroRNAs interact with multiple mRNAs resulting in their degradation and/or translational repression. This report used the delayed implantation model to determine the role of miRNAs in blastocysts. Dormant blastocysts in delayed implanting mice were activated by estradiol. Differential expression of 45 out of 238 miRNAs examined was found between the dormant and the activated blastocysts. Five of the nine members of the microRNA lethal-7 (let-7) family were down-regulated after activation. Human blastocysts also had a low expression of let-7 family. Forced-expression of a family member, let-7a in mouse blastocysts decreased the number of implantation sites (let-7a: 1.1±0.4; control: 3.8±0.4) in vivo, and reduced the percentages of blastocyst that attached (let-7a: 42.0±8.3%; control: 79.0±5.1%) and spreaded (let-7a: 33.5±2.9%; control: 67.3±3.8%) on fibronectin in vitro. Integrin-β3, a known implantation-related molecule, was demonstrated to be a target of let-7a by 3′-untranslated region reporter assay in cervical cancer cells HeLa, and Western blotting in mouse blastocysts. The inhibitory effect of forced-expression of let-7a on blastocyst attachment and outgrowth was partially nullified in vitro and in vivo by forced-expression of integrin-β3. This study provides the first direct evidence that let-7a is involved in regulating the implantation process partly via modulation of the expression of integrin-β3. (200 words)
Análise do uso de recursos de interação, colaboração e autoria em um ambiente virtual de aprendizagem para o ensino superior na área da saúde
Efeitos do coríndon no desenvolvimento de propriedades estruturais, mecânicas e tribológicas das matérias-primas para a fabricação de produtos estruturais
Improving the technological properties of a ceramic product without affecting its aesthetic quality is a daily challenge of the regional ceramic companies. To achieve this objective, analyzes were performed on an illitic-kaolinitic clay by adding corundum as an additive. The corundum content varied from 5% to 20% by weight with a particle size of less than 75 μm, being able to obtain products with low porosities and high mechanical resistance. This research is part of a series of studies carried out on an argillaceous raw material from the region of Norte de Santander (Colombia). The influence of the corundum content on the technological properties was evaluated. The results showed that corundum, when mixed with traditional raw materials, offers the conditions to be used as an additive in the production of ceramic products with increases of up to 67% in mechanical strength and a reduction of porosity of 46%, which can contribute to the development of value-added ceramic products for use in other technological applications.Melhorar as propriedades tecnológicas de um produto cerâmico sem afetar sua qualidade estética é um desafio diário das empresas regionais de cerâmica. Para atingir este objetivo, foram realizadas análises em uma argila ilítica-caulinítica com adição de 5% a 20% em massa de coríndon com tamanho de partícula inferior a 75 μm, obtendo produtos com baixa porosidade e alta resistência mecânica. Esta pesquisa é parte de uma série de estudos realizada em uma matéria-prima argilosa da região do Norte de Santander (Colômbia). Foi estudado o efeito do teor de coríndon nas propriedades tecnológicas. Os resultados mostraram que o coríndon, quando adicionado a matérias-primas tradicionais, pode ser usado como um aditivo na manufatura de produtos cerâmicos com aumentos de até 67% na resistência mecânica e redução de porosidade de 46%, o que pode contribuir para o desenvolvimento de produtos cerâmicos com valor agregado para uso em outras aplicações tecnológicas
- …